• Coupled systems mechanics
• /
• 제8권3호
• /
• pp.219-245
• /
• 2019

The present research deals in two dimensional (2D) transversely isotropic magneto generalized thermoelastic solid without energy dissipation and with two temperatures due to time harmonic sources in Lord-Shulman (LS) theory of thermoelasticity. The Fourier transform has been used to find the solution of the problem. The displacement components, stress components and conductive temperature distribution with the horizontal distance are calculated in transformed domain and further calculated in the physical domain numerically. The effect of two temperature are depicted graphically on the resulting quantities.

• East Asian mathematical journal
• /
• 제33권1호
• /
• pp.1-9
• /
• 2017

In [8] they introduced a new finite element method for accurate numerical solutions of Poisson equations with corner singularities, which is useful for the problem with known stress intensity factor. They consider the Poisson equations with homogeneous Dirichlet boundary condition, compute the finite element solution using standard FEM and use the extraction formula to compute the stress intensity factor, then they pose a PDE with a regular solution by imposing the nonhomogeneous boundary condition using the computed stress intensity factor, which converges with optimal speed. From the solution they could get accurate solution just by adding the singular part. This approach works for the case when we have the reasonably accurate stress intensity factor. In this paper we consider Poisson equations defined on a domain with a concave corner with Neumann boundary conditions. First we compute the stress intensity factor using the extraction formular, then find the regular part of the solution and the solution.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.146-153
• /
• 1993

Thd specimens were melited in high frequency induction furnace. The samples for measurements were prepared by machining cylinder of 9.5mm diameter and 15mm height. These samples were then hot-pressed according to strain rate ( .epsilon. ). These samples were decanned and cut out, and subsequently heat treated at 1000 .deg. C for 4hours. These were investigated for the change of microstructure, domain pattern, X-ray diffraction and magnetic properties. The stress distributions in the specimens during compressing process were calculated by a finite element method program(SPID). The calculated stresses were effective stress( .sigma. $_{eff}$), compressive direction stress( .sigma. $_{z}$), and shear stress( .tau. $_{rz}$ ). These stresses were compared with the experimental data.a.a.

• 한국직업건강간호학회지
• /
• 제15권1호
• /
• pp.58-71
• /
• 2006

Purpose: This study was performed to identify workers' Job stress status and to analyse the influencing factors. Method: Data were collected from 456 workers with Korean Occupational Stress Questionnaire Short Form(KOSQ SF) and analysed using descriptive statistics, t-test, ANOVA. Results: Total job stress status of men was slightly lower than Korean workers' standard. In case of women, the score of total job stress was lower than Korean workers' standard. The most significant influencing factors to stressors were insufficient sleeping time and self cognitive bad health condition. Among seven domains of job stressors, job demand was affected by 8 characteristics. Conclusion: This study indicated that workers' job stress level were various by their characteristics except workplace size. The development of stress management programs by types of industry is required. On the base of the model program, planning of customized program for every company or employee is required. High job demand, insufficient job control, insufficient sleeping time, bad health condition are the key factors of workers' job stress in this study. The change of workers' health behavior with supportive environment is essential to stress management program. More researches for adding physical environment domain to KOSQ SF are expected.

• Wind and Structures
• /
• 제19권6호
• /
• pp.687-708
• /
• 2014

The performance of the $k-{\varepsilon}$ and $k-{\omega}$ two-equation turbulence models was investigated in computational simulations of the neutrally stratified atmospheric boundary layer developing above various terrain types. This was achieved by using a proposed methodology that mimics the experimental setup in the boundary layer wind tunnel and accounts for a decrease in turbulence parameters with height, as observed in the atmosphere. An important feature of this approach is pressure regulation along the computational domain that is additionally supported by the nearly constant turbulent kinetic energy to Reynolds shear stress ratio at all heights. In addition to the mean velocity and turbulent kinetic energy commonly simulated in previous relevant studies, this approach focuses on the appropriate prediction of Reynolds shear stress as well. The computational results agree very well with experimental results. In particular, the difference between the calculated and measured mean velocity, turbulent kinetic energy and Reynolds shear stress profiles is less than ${\pm}10%$ in most parts of the computational domain.

• 한국세라믹학회지
• /
• 제29권1호
• /
• pp.65-73
• /
• 1992

The effect of grain size on the time-dependent piezoelectrice degradation of a poled PZT of MPB composition Pb0.988Sr0.012 (Zr0.52Ti0.48)O3 with 2.4 mol% of Nb2O5 was studied, and the degradation mechanism was discussed. Changes in the internal bias field and the internal stress both responsible for the time-dependent degradation of poled PZT were examined by the polarization reveral technique, XRD and Vickers indentation, respectively. The piezoelectric degradation increased with increasing time and grain size, and the internal bias field due to space charge diffusion decreased with increasing grain size of poled PZT. The internal bias field, however, was almost insensitive to the degradation time regardless of the grain size. On the other hand, both the x-ray diffraction peak intensity ratio of (002) to (200) and the fracture behavior including the crack propagation support that the ferroelectric domain rearrangement of larger grain size showed rapid relaxation of the internal stress compared with smaller one, which is thought the origin of the larger piezoelectric degradation in the former. In conclusion, the contribution of space charge diffusion on the piezoelectric degradation of PZT is strongly dependent on both the grain size and the composition. Thus, the relaxation of internal stress due to the ferroelectric domain rearrangement as well as the amount and time-dependence of the internal bias field due to space charge diffusion should be considered simultaneously in the degradation mechanism of PZT.

• Ocean Systems Engineering
• /
• 제8권3호
• /
• pp.247-279
• /
• 2018

This study aims to investigate the behavioral characteristics of the LWSCR (lazy-wave steel catenary riser) for a turret-moored FPSO (Floating Production Storage Offloading) by using fully-coupled hull-mooring-riser dynamic simulation program in time domain. In particular, the effects of initial geometric profile on the global performance and structural behavior are investigated in depth to have an insight for optimal design. In this regard, a systematic parametric study with varying the initial curvature of sag and arch bend and initial position of touch down point (TDP) is conducted for 100-yr wind-wave-current (WWC) hurricane condition. The FPSO motions, riser dynamics, constituent structural stress results, accumulated fatigue damage of the LWSCR are presented and analyzed to draw a general trend of the relationship between the LWSCR geometric parameters and the resulting dynamic/structural performance. According to this study, the initial curvature of the sag and arch bend plays an important role in absorbing transferred platform motions, while the position of TDP mainly affects the change of static-stress level.

• 전산구조공학
• /
• 제11권1호
• /
• pp.261-274
• /
• 1998

본 연구에서는 무요소방법에 적응적 해석기법을 적용하기 위한 부분 및 전체오차의 평가기법을 제안하였다. 본 연구에서 제안한 오차의 평가방법은 무요소방법에서 계산된 응력이 오차가 큰 영역에서 진동한다는 특성을 이용한 것으로 해석결과 얻어진 응력을 낮은 차수의 형상함수로 투사하는 후처리를 함으로써 가상진동모우드를 제거하고 이때 얻어진 투영응력과 원래의 응력을 비교하여 부분오차 및 전체오차를 구할 수 있다. 1차원 및 2차원 예제해석을 통하여 투영응력을 구할 때 가능한 한 작은 영향영역을 사용하는 것이 바람직하다는 것을 보였으며 이는 영향영역의 크기를 과도하게 설정할 경우 투영응력을 과대 평가할 수 있기 때문이다. 본 연구에서 제안한 오차의 평가기법은 다른 무요소 방법에 적용될 수 있다.

• 한국전산구조공학회논문집
• /
• 제20권3호
• /
• pp.311-319
• /
• 2007

본 연구에서는 구조 요소의 응력해석을 위한 무요소 RPIM(Meshfree Radial Point Interpolation Methods)법을 제시한다. 이를 위하여 먼저 무요소법의 형상함수와 무요소 RPIM법의 정식화 과정 및 프로그래밍을 간략히 한다. 절점보간법은 방사기저함수와 다항기저함수를 포함하고 있고 이 중 다항기저함수는 특이성문제를 극복할 수 있다. 게다가 무요소 RPIM법의 보간함수는 영향영역의 절점을 통과하고 형상함수는 크로네커 델타 성질을 갖고 있으므로 최소자승법에 기반을 둔 무요소법보다 쉽게 필수경계조건을 만족시킨다. 본 연구의 정확성을 확인하기 위하여, 캔틸레버형 평판, 유공평판, 속이 빈 원통 문제의 수치예제를 수행하고 이론 해와 유한요소법 결과를 비교, 분석한다.

• 한국자기학회지
• /
• 제8권4호
• /
• pp.185-191
• /
• 1998

본 연구는 극박 35Si-Fe 방향성 규소강판을 권자심으로 사용하는 것을 목적으로 권자심의 곡률반경과 두께에 따른 탄성 및 소성변형솨 같은 변형 상태를 조사하였으며, 응력제거 열처리 온도에 따른 권자심의 응력의 완화와 자기특성의 변화를 자구구조와 관련지어 검토하였다. 시료의 두께와 곡률반경에 대해 소성변형의 경계가 간단한 식으로 얻어졌고, 실험치와 비교한 결과 일치하엿다. 극박규소강판을 권자심으로 감은 직후에는 시료의 내표면에 도입된 응역에 의해 180$^{\circ}$자벽은 관찰되지 dkag고 메이지 패턴의 자구구조가 관찰되었다. 열처리 온도가 $600^{\circ}C$에서 응력이 완하되기 시작하며 자기특성도 회복하였고 권자심 내표면에 180$^{\circ}$ 자벽이 회복되었다. 그러나 90$0^{\circ}C$$\times$30 min의 열처리를 하여도 권자심의 B8는 스트립상의 값으로 회복되지만 탄성변형역에 존재하는 시료에서조차도 Hc는 회복되지 않았다. 이는 내표면에 잔류하는 메이즈 패턴의 자구에 의한 것으로 생각된다. 이 실험으로부터 극박 ？향성 규소 강판을 이용하여 권자심을 제작할 때 권자심에 국부적으로 도입되는 응력에 대한 대책이 매우 중요하다고 생각된다.