• 한국분말재료학회지
• /
• 제3권2호
• /
• pp.104-111
• /
• 1996

In order to obtain homogeneous and high quality products in powder compaction forging process, it is very important to control stress, strain, density and density distributions. Therefore, it is necessary to understand quantitatively the elasto-plastic deformation and densification behaviors of porous metals and metal powders. In this study, elasto-plastic finite element method using Lee-Kim's pressure dependent porous material yield function has been used for the analysis of three dimensional indenting process. The analysis predicts deformed geometry, stress, strain and density distribution and load. The calculated load is in good agreement with experimental one. The calculated results do not show axisymmetric distributions because of the edge effect. The core part which is in contact with the indentor and the outer diagonal edge part are in compressive stress states and the middle part is in tensile stress state. As a results, it can be concluded that three dimensional analysis is more realistic than axisymmetric assumption approach.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.187-192
• /
• 1998

Recent construction method in mass concrete structures would depend on the control of hydration heats and thermal stresses by using the low heat cement, optimized block size and a lift height, or both. This experimental study aims at the possibility of thermal cracks according to the different types of cementations material and at the investigation of these effects. Four different types of cements are applied to the mock-up test and are evaluated in terms of temperature rises and thermal stresses with the use of thermocouples, strain gauges and effective stress gauges. As a result of this study, it was found that stresses measured from effective stress gauges agree well with ones form strain gauges, and the trend of stress occurrence can be well evaluated from theoretical analysis.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.381-390
• /
• 2023

본 연구에서는 염해를 받은 콘크리트의 역학적 성능 평가를 수행하고, 실험 결과를 바탕으로 염소이온 농도에 따른 압축응력변형률 모델을 제시하였다. 염해를 모사하기 위해 콘크리트 배합 시 CaCl₂ 용액을 첨가하였으며, 염소이온의 농도는 결합재의 중량 대비 0, 1, 2, 4 %가 되도록 하였다. 콘크리트의 최대 압축응력 이후의 응력-변형률 곡선을 조사하기 위해 변위 제어를 통해 압축강도를 측정하였다. 염소이온 농도가 1 %인 경우에는 최대 압축응력이 증가하였으나, 염소이온 농도가 2 % 이상인 경우에는 최대 압축응력이 감소하였다. 최대 압축응력에서의 변형률의 경우 재령 7일의 시편에서는 염소이온 농도에 따른 경향이 나타나지 않았다. 재령 28일의 시편에서는 염소이온 농도가 증가함에 따라 감소하였다. 재령 28일의 최대 압축응력와 변형률의 변화를 이용하여 Popovics model에 기반한 응력-변형률 곡선 모델을 제시하였다. 염소이온의 농도 증가에 따른 역학적 성능 저하의 원인을 조사하기 위해 수화생성물 분석을 수행하였다. 염소이온의 농도가 증가함에 따라 Friedel's salt가 증가하고, portlandite가 감소하는 것을 확인하였다.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1388-1392
• /
• 2018

Metal thin films are used widely to solve the vibration problem. However, damping mechanism is still not clear, which limits the further improvement of the damping properties for film and the development of multi-functional damping coating. In this paper, Damping microscopic mechanism of porous metal films was investigated at both macroscopically and microscopically mixed levels. Molecular dynamics simulation method was used to model and simulate the loading-unloading numerical experiment on the micro-pore and vacancy model to get the stress-strain curve and the microstructure diagram of different defects. And damping factor was calculated by the stress-strain curve. The results show that dislocations and new vacancies appear in the micro-pores when metal film is stretched. The energetic consumption from the motion of dislocation is the main reason for the damping properties of materials. Micro-mechanism of damping properties is discussed with the results of in-situ experiment.

• 대한치과교정학회지
• /
• 제48권6호
• /
• pp.384-394
• /
• 2018

Objective: This study was performed to investigate an appropriate degree of prestretch for orthodontic synthetic elastomeric chains focusing on time-dependent viscoelastic properties. Methods: Orthodontic synthetic elastomeric chains of two brands were prestretched to 50, 100, 150, and 200% of the original length in one and three cycles, and the hysteresis areas of the obtained stress-strain curves were determined. Acrylic plates were employed to maintain constant strain during the experiment. A total of 180 samples were classified into nine groups according to brand, and their stresses and permanent deformations were measured immediately after prestretch (0 hour), after 1 hour and 24 hours, and after 1, 2, 3, 4, 5, 6, 7, and 8 weeks. The relationship between stress relaxation and permanent deformation was investigated for various degrees of prestretch, and the estimated stress resulting from tooth movement was calculated. Results: The degree of prestretch and the stress relaxation ratio exhibited a strong negative correlation, whereas no correlation was found between the degree of prestretch and the average normalized permanent strain. The maximal estimated stress was observed when prestretch was performed in three cycles to 200% of the original length. Conclusions: Although prestretch benefited residual stress, it did not exhibit negative effects such as permanent deformation. The maximal estimated stress was observed at the maximal prestretch, but the difference between prestretch and control groups decreased with time. In general, higher residual stresses were observed for product B than for product A, but this difference was not clinically significant.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권5호
• /
• pp.734-738
• /
• 2006

The present study was conducted to determine the effect of cold stress on broiler performance and ascites susceptibility. Male chicks were obtained from a commercial strain of broiler breeders. The trial was divided into two treatments (control and cold stress groups). Ascites was induced in broiler chickens in the trial by exposing the chickens to low temperature (Ta) and by supplying a pelleted diet. The two experimental treatments consisted of: 1) Control group, $33.3^{\circ}C$ the $1^{st}$ wk, $30.2^{\circ}C$ the $2^{nd}$ wk, and $27.5^{\circ}C$ the $3^{rd}$ wk. 2) Cold stress group, $29.0^{\circ}C$ the $1^{st}$ wk, $26.4^{\circ}C$ the $2^{nd}$ wk, and $23.1^{\circ}C$ the $3^{rd}$ wk. From the end of the $3^{rd}$ wk all broilers were reared to 6 wk of age at a constant temperature of $21^{\circ}C$. There was significant difference in live BW during wk 1 to 5. The control group was consistently the heaviest; however, at 6 wk of age, both groups weighed the same. Body weight gain up to 3 wk was significantly decreased by cold stress. During wk 3 and 6 the chicks in the cold stress group had greater BW gain compared with the chicks in the control group. There were significant differences in mortality due to ascites between the groups. During wk 3 and 6 the cold stress group exhibited the most ascites mortality (9.52%) when compared with the control group (1.90%). At 5 wk of age cold stress condition caused significant changes in packed cell volume (PCV), hemoglobin (Hb) and red blood cell counts (RBC). Right ventricle weight was significantly heavier in the cold stress group than the control. There were also significant differences in right ventricle/total ventricle (RV/TV) ratios at 5 wk. the right ventricle/total ventricle ratios in the cold stress group was higher (0.25) than the control group (0.20). It was concluded that, fast growth and cold temperatures are the primary triggers for ascites during commercial broiler production.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.498-500
• /
• 2009

본 연구에서는 한국인 아동의 우식치아로부터 분리한 S. mutans K7으로부터 HtrA gene을 동정하고 HtrA expression이 산성환경하에서 S. mutans의 생육에 미치는 영향을 알아보았다. S. mutans K7의 HtrA mutant strain은 산성환경에서 parental strain과 비교하였을 때, 생육에 있어서 상당한 차이를 나타내었다. 또한 Biofilm formation에 관여하는 GtfB, 와 GtfC의 발현량도 현저히 줄어들었다. 그리고 HtrA mutant strain에 HtrA gene을 삽입하여 HtrA의 발현량을 회복하였을 경우에는 acid stress하에서 control과 같은 nomal growth phenotype을 회복하였다. 이러한 결과들은 S. mutans K7에서 HtrA가 acid stress동안에 중요한 역할을 담당함을 제시하고 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.47-52
• /
• 2004

Springback comes from the release of residual stress after forming. The control of phenomenon is especially important in the sheet metal forming since there are no other practical methods available to correct the dimensional inaccuracy from springback. Therefore the accurate predication before the die machining has been a long goal in the Held of sheet metal forming. The aim of the present study is to enhance the prediction capability of finite element(FE) analysis for the springback phenomenon. For this purpose FE analysis for V-bending has been carried out with the commercial programs, LS-DYNA. The FE analysis results have been validated through the comparison of experimental. The experimental results measured directly by the strain gauge have given the confidence to FEA.

• 한국터널지하공간학회 논문집
• /
• 제13권6호
• /
• pp.501-517
• /
• 2011

일반적으로 터널 시공현장에서는 계측된 천단 및 내공변위와 계측관리기준을 비교하여 터널의 안정성을 판단한다. 현재 계측관리기준은 지반조건, 터널단면의 크기, 시공방법, 지보재량 등을 고려한 경험을 통해 세워지고 있는 실정이다. 따라서 새로운 계측관리기준으로 한계변형률을 이용하는 방법에 대한 연구가 다수 수행되었다. 그러나 대부분의 연구는 일축압축강도실험에서 얻어진 한계변형률을 기준으로 삼고 있어 실제 터널 굴착 시 발생하는 응력의 증가 및 종방향 아칭에 의한 암반 손상을 고려하지 않는 문제점을 가지고 있다. 따라서 본 연구에서는 국내 대표 암종인 화강암과 편마암의 한계변형률 특성을 조사하기 위하여 일축압축강도실험과 응력의 증가 및 종방향 아칭을 고려한 손상제어실험을 수행하였다. 손상제어실험에서 얻어진 한계변형률은 일축압축강도실험에서 얻어진 한계변형률보다 다소 작게 나타났다. 이는 일축압축강도실험에서 얻은 한계변형률은 터널 굴착 시의 응력이력을 고려하여 다소 감소시켜야 한다는 것을 의미한다. 또한 대심도 터널에서 흔히 발생하는 취성파괴를 평가하기 위한 손상한계변형률을 제안하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 학술대회 초록집
• /
• pp.198-202
• /
• 2009

스플릿 홉킨슨 압력 봉(SHPB)실험은 암석 및 콘크리트와 같은 취성재료의 동적 물성과 변형특성을 파악하고 압축 응력-변형율 데이터를 획득하기 위하여 사용된다. SHPB 실험법은 원리상 대상시료가 파괴이전에 동적응력평형 상태와 일정 변형율 속도 조건하여 놓여져 있어야 한다. 이러한 조건을 만족시키기 위하여 충격봉과 입사봉의 충격에 의하여 발생되는 충격 입사파형을 제어할 필요가 있다. 최근에는 원형 디스크를 충격봉과 입사봉 사이에 두어 입사 충격파형을 제어하는 펄스쉐이핑 기법이 적용되고 있다. 본 연구에서는 입사 충격파형을 정밀하게 제어할 목적으로 다양한 형태와 크기의 금속디스크를 대상으로 SHPB 실험을 수행하여 동적 변형 특성을 파악하였다. 펄스쉐이퍼의 두께와 직경이 작아짐에 따라 응력값과 파장은 증가하였다.