• Journal of the Korean Vacuum Society
• /
• v.21 no.5
• /
• pp.273-278
• /
• 2012

Over the last decade, the hafnium-based gate dielectric materials have been studied for many application fields. Because these materials had excellent behaviors for suppressing the quantum-mechanical tunneling through the thinner dielectric layer with higher dielectric constant (high-K) than $SiO_2$ gate oxides. Although high-K materials compensated the deterioration of electrical properties for decreasing the thickness of dielectric layer in MOSFET structure, their nano-mechanical properties of $HfO_2$ thin film features were hardly known. Thus, we examined nano-mechanical properties of the Hafnium oxide ($HfO_2$) thin film in order to optimize the gate dielectric layer. The $HfO_2$ thin films were deposited by rf magnetron sputter using hafnium (99.99%) target according to various oxygen gas flows. After deposition, the $HfO_2$ thin films were annealed after annealing at $400^{\circ}C$, $600^{\circ}C$ and $800^{\circ}C$ for 20 min in nitrogen ambient. From the results, the current density of $HfO_2$ thin film for 8 sccm oxygen gas flow became better performance with increasing annealing temperature. The nano-indenter and Weibull distribution were measured by a quantitative calculation of the thin film stress. The $HfO_2$ thin film after annealing at $400^{\circ}C$ had tensile stress. However, the $HfO_2$ thin film with increasing the annealing temperature up to $800^{\circ}C$ had changed compressive stress. This could be due to the nanocrystal of the $HfO_2$ thin film. In particular, the $HfO_2$ thin film after annealing at $400^{\circ}C$ had lower tensile stress, such as 5.35 GPa for the oxygen gas flow of 4 sccm and 5.54 GPa for the oxygen gas flow of 8 sccm. While the $HfO_2$ thin film after annealing at $800^{\circ}C$ had increased the stress value, such as 9.09 GPa for the oxygen gas flow of 4 sccm and 8.17 GPa for the oxygen gas flow of 8 sccm. From these results, the temperature dependence of stress state of $HfO_2$ thin films were understood.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.2
• /
• pp.80-85
• /
• 2017

Purpose The D530c have cadmium zinc telluride(CZT) detectors that are arranged focus on the heart. This structural characteristic allows for quicker imaging without rotation, but this is sensitive to patient movement and can affect the test results. The aim of this study is to optimize the image quality by reducing patient movement during the examination. Materials and Methods We analyzed the patients' movements, and performed various activities such as provided patient education about correct breathing techniques and avoiding patient movements, and created breathing correction tools to minimize patient movement during exam. The 70 patients who underwent myocardial perfusion SPECT with D530c in November 2016 were categorized as the group before the corrective steps. Another 70 patients who underwent the procedure with D530c from February 14, 2017 to February 21, 2017 were categorized as the improvement group. Images acquired during stress and at rest were compared and analyzed by measuring the durations of heart movements over certain distances (4 mm, 8 mm, 12 mm, or more) noted on the x-, y-, and zaxes. Results After the activities, the durations of heart movements decreased in the images acquired both under stress and at rest. In particular, there were no large motions greater than 12 mm recorded in the stress images after the improvement. There was a significant difference (p<0.005) in the 4-mm and 8-mm fluctuations on the X-axis and the 8-mm fluctuations on the Z axis in the stress images, but there was no significant difference (p>0.005) in the other stress and rest intervals. Conclusion The decrease in the time of motion occurrence due to the 4 mm fluctuation distance that can occur through breathing can be understood as a result of the breathing being corrected through training and motion prevention tools. It is expected that the image quality will be improved by reducing the occurrence time according to the variation distance of 8 mm or 12 mm, which is expected as the actual movement of the patient other than the breathing.

• Journal of the Korean Vacuum Society
• /
• v.15 no.2
• /
• pp.152-161
• /
• 2006

In order to test the capacity of Si(5 5 12) as a potential template for nanowire fabrication, Bi/Si(5 5 12) system has been studied by STM. With Bi deposition, Si(5 5 12) has been transformed to Si(3 3 7) terrace. Initially Bi atoms selectively replace Si-dimers and Si-adatoms with Bi-dimers and Bi-adatoms, respectively. With extended Bi adsorption, Bi-dimers adsorb on the pre-adsorbed Bi-dimers and Bi-atoms. These dimers in the second layer form Bi-dimer pairs having relatively stable $p^3$ bonding, Finally, the Bi-dimer adsorbs on the Bi-dimers in the second layer and saturates. It can be deduced that both surface transformation to (3 3 7) and site-selective Bi adsorption are possible due to substrate-strain relaxation through inserting Bi atoms into subsurface of Si substrate.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.16-24
• /
• 2018

In this study, an experiment was conducted to analyze mortar based rheology for 3D printing method application. The tendency of rheological properties due to the change of W/B, binder type, replacement ratio, and super plasticizer which have a great influence on the flow characteristics of concrete was experimentally analyzed. Experiments were carried out by dividing into paste and mortar. In the paste experiment, rheology was analyzed by setting W/B, binder type, replacement ratio, and super plasticizer dosage as main variables. In the mortar experiment, the rheological properties of W/B and sand ratio were analyzed. As a result, as the W/B was increased, the viscosity decreased and the FA ratio to replace FA increased and the viscosity increased. In order to increase the fluidity, substitution of only 5% of SF reduces the shear stress and the viscosity is reduced by about 83%. Mortar rheological evaluation shows that there is a critical section where a large change occurs in the W/B 30 to 40% section. Also, in the same W/B, it is analyzed that there is a critical section where the shear stress increases more than twice in the sand ratio of 50~60%.

• The Korean Journal of Zoology
• /
• v.28 no.2
• /
• pp.108-119
• /
• 1985

Aimed at elucidating the modulation of stress protein gene expression, the effect of environmental stress and pH on the induction of stress protein synthesis has been analyzed using SDS-polyacrylamide gel electrophoresis. Although the general patterns of protein synthesis in MEF and SCK cells are different, stress protein patterns are identical in both cells. Among three stress proteins, the $SP_70$ exhibits an interesting kinetics of induction and decay. The kinetics of $SP_70$ under acidic or normal pH appears to be similar, but the degree of hyperthermia and duration of treatment required for maximum induction are found to be different, being lower temperatures and shorter durations under acidic pH compared to those under normal pH. Inducation of stress protein and the accumulation of mRNA coding for stress proteins are blocked with actinomycin D, indicating the new RNA transcription is required for stress blocked with actinomycin D, indicating that new RNA transcription is required for stress protein induction. Treatment of cycloheximide during the after hyperthermia indicates that no specific protein is required for the induction of stress protein synthesis. Based on our preliminary data, we postulate that induction of stress protein synthesis in MEF and SCK cells is regulated primarily at the level of transcription and that $SP_70$ autoregulates its synthesis and levels of this protein are correlated with the stresseed state of a cell.

• Journal of Nutrition and Health
• /
• v.23 no.4
• /
• pp.229-236
• /
• 1990

We made S.D male rats eat 3.6% tryptophan(trp) or tyrosine(thr)-enriched diet for 4 days and measured the trp or tyr use in serum of stressed rats as well as cortisol, glucose and free fatty acid(ffa) changes in serum. When control group had received stress treatment, their tyr level has dropped significantly but no changes in trp level and their cortisol, glucose, ffa levels in serum were increased significantly all together. Trp-enrichment alone can't change serum cortisol and ffa levels but trp pools in serum and brain enlarged by dietary enrichment. Trp-enriched group's serum glucose concentration was significantly lower than control-dieted group. When trp-enriched group received stress treatment, their responses to stress were different from control-dieted group. Serum trp concentration of trp-enriched-with-stress group has dropped significantly and cortisol level was increased significantly but not as much as control-dieted-with-stress group. Glucose and ffa levels of trp-enriched-with-stress group did not increase at all. Tyr-enriched group has also larger serum pool of tyr and lowest basal cortisol level in all three diet group. tyr-enriched group's and ffa levels were in normal range and those responses to stress were same pattern with control diet group. Most importantly in tyr-enriched-with-stress group, only slight but not significant increase of cortisol level was shown.

• Journal of the Korean Chemical Society
• /
• v.21 no.5
• /
• pp.330-338
• /
• 1977

In order to elucidate the plastic deformation of solids, the following assumptions were made: (1) the plastic deformation of solids is classified into two main types, the one which is caused by dislocation movement and the other caused by grain boundary movement, each movement being restricted on a different shear surface, (2) the dislocation movement is expressed by a mechanical model of a parallel connection of various kinds of Maxwell dislocation flow units whereas the grain boundary movement is also expressed by a parallel connection of various kinds of Maxwell grain boundary flow units; the parallel connection in each type of movements indicates that all the flow units on each shear surface flow with the same shear rate, (3) the latter model for grain boundary movement is connected in series to the former for dislocation movement, this means physically that the applied stress distributes homogeneously in the flow system while the total strain rate distributes heterogeneously on the two types of shear planes (dislocation or grain boundary shear plane), (4) the movement of dislocation flow units and grain boundary units becomes possible when the atoms or molecules near the obstacles, which hinder the movement of flow units, diffuse away from the obstacles.Using the above assumptions in conjunction with the theory of rate processes, generalized equations of shear stress and shear rate for plastic deformation were derived. In this paper, four cases important in practice were considered.ted N${\cdot}{\cdot}{\cdot}$O hydrogen bond and the second of two normal N${\cdot}{\cdot}{\cdot}$O hydrogen bonds, both of which exist between the amino group and the perchlorate, groups. A p-phenylenediamine group is approximately planar within an experimental error and bonded to twelve perchlorates: ten perchlorates forming hydrogen bonds and two being contacted with the van der Waals forces. A perchlorate group is surrounded by six p-phenylenediamines and four perchlorates; among the six p-phenylenediamines, five of them are hydrogen-bonded, and the rest contacted with the van der Waals force.

• The korean journal of orthodontics
• /
• v.41 no.6
• /
• pp.384-398
• /
• 2011

Objective: The purpose of this study was to analyze the stress distribution and the displacement pattern of mandibular anterior teeth under various intrusive force vectors according to the position of orthodontic miniscrews and hooks, using three-dimensional finite element analysis. Methods: A three-dimensional finite element model was constructed to simulate mandibular teeth, periodontal ligament, and alveolar bone. The displacement of individual tooth on three-dimensional planes and the von Mises stress distribution were compared when various intrusion force vectors were applied. Results: Intrusive forces applied to 4 mandibular anterior teeth largely resulted in remarkable labial tipping of the segment according to the miniscrew position. All 6 mandibular anterior teeth were labially tipped and the stress concentrated on the labiogingival area by intrusive force from miniscrews placed mesial to the canine. The distointrusive force vector led to pure intrusion and the stress was evenly distributed in the whole periodontal ligament when the hook was placed between the central and lateral incisors and the miniscrew was placed distal to the canine. Conclusions: Within the limits of this study, it can be concluded that predictable pure intrusion of the 6 anterior teeth segment may be accomplished using miniscrews placed distal to the canine and hooks located between the central and lateral incisors.

• Journal of Korean Society of Forest Science
• /
• v.86 no.1
• /
• pp.80-86
• /
• 1997

The objective of this study was to investigate how resistant poplar hybrid makes compensation to ozone stress. Growth, net assimilation rate and initial Rubisco activity were investigated. This study elucidates the physiological mechanisms associated with ozone sensitivity and resistance in 3 selected $F_2$ hybrids, a family originating from a cross between Populus trichocarpa${\times}$P. deltoides. Open-top chambers were used. Ozone concentrations varied from 90 to 115 ppb for 126 days, 6 to 9 hours in a day. This study tested the hypothesis that resistant poplar hybrid maintains the biomass production to ozone exposure via increased net assimilation rate and Rubisco activity. Growth, biomass, net assimilation rate and initial Rubisco activity were generally reduced by ozone treatment. In the tree parts, root under ozone stress was the most sensitive part. Reduced allocation of photosynthates to root growth might be due to increased respiratory demands for maintenance and repair of aboveground tissue damaged by ozone stress. Maintenance or increases remaining leaves in photosynthetic rates and Rubisco activity in resistant clone in response to ozone treatment were the results of biological compensation to ozone stress.

• KSBB Journal
• /
• v.16 no.4
• /
• pp.344-350
• /
• 2001

The effect of salinity stress of Brassica olearacea and Capsicum annuum were studied at various levels of salinity conditions(Na-gluconate, K-gluconate, NaCl, KCl). The effects of salinity stress were measured by seedling growth rates and secondary metabolites contents of the stressed plants. Each seedling studied on the response of different salinity stress. Seedling growth of Capsicum annuum was inhibited up to 200 mM salt tolerance and Brassica olearacea was inhibited up to 400 mM salt tolerance. The produced anthocyanin was separated to high value from 200 mM NaCl in case of Brassica olearana and 50 mM K-gluconate in case of Capsicum annuum. The BADH activity was very high in Brassica olearacea seedlings treated with 200 mM NaCl and in Capsicum annuum seedlings treated with 100 mM K-gluconate. The BADH activities were increased during the early culture days, it induced betaine synthesis. The salinity stress promoted BADH activiy, subsequently endogenous betaine contents were increased, and it seemed to be secure seedling from salinity stress. The salinity concentration of 200 mM was effective on the inhibition of seed germination and on the increase of proline accumulation in tissue. The inhibition of seedling growth and accumulation of secondary metabolites in seedling were caused osmotic hypersensitivity against salinity stress.