• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.56-62
• /
• 2017

Because adhesively bonded joints are used in many structural systems, it is important to predict accurate adhesive strengths. Composite aircraft with many joints are easily exposed to low temperatures and high relative humidity. This paper presents a humidity aging effect on the adhesive strength of a composite single-lap joint (SLJ). The adhesive strength of the SLJ is predicted using a finite element analysis with a cohesive zone model (CZM) technique. The humidity aging effect is evaluated based on the adhesive strength and CZM parameters. A lap joint test is carried out on the composite SLJ specimens, which are exposed for four months of 100% R.H. at $25^{\circ}C$. The predicted strengths are in good agreement with experimental data, and the actual crack propagation is satisfactorily simulated using the local CZM technique.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.725-733
• /
• 2008

A thixotropic grout has been developed for the use of filling a tail void in the shield TBM and as well as various ground voids. The grout developed in this study is a mixture of inorganic substance, cement and some functional additives. Its engineering characteristics was investigated by measuring a viscosity and unconfined compressive strengths. The optimum mix proportion for an effective thixotropic grout was proposed through several repeated laboratory tests. The various physical properties such as thixotropy, unconfined compressive strengths, and durability of the thixotropic grout and the gels produced from the grout were compared with those of the well-known waterglass-type grout such as L.W.. The thixotropic grout developed in the study exhibited an excellent performance for back-filling of tail voids in the shield TBM based on experimental results compared to the existing waterglass grout.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.571-572
• /
• 2009

초고강도 콘크리트의 개발에 따라 철근 압축이음에 대한 연구 필요성이 높아지고 있다. 현행 설계 기준에서 콘크리트강도와 횡보강근의 영향을 고려하지 않기 때문에 압축이음길이가 인장이음길이보다 길어지는 기현상(奇現象)이 발생한다. 본 연구에서는 51개 실험체의 결과를 바탕으로 40MPa부터 70MPa까지 콘크리트에 대한 압축이음길이 설계식을 제안하였다. 본 연구에서 제안된 압축이음길이 설계식을 이용하여 고강도 콘크리트에서 압축이음길이가 인장이음길이보다 길어지는 이상 현상을 해소할 수 있다. 더불어 제안된 압축이음길이 설계식은 통계적 기법에 기반을 두어 재료강도와 동일한 수준의 신뢰성을 확보할 수 있다.

• International Journal of Concrete Structures and Materials
• /
• 제10권3호
• /
• pp.257-269
• /
• 2016

Early-strength-concrete (ESC) made of Type I cement with a high Blaine value of $500m^2/kg$ reaches approximately 60 % of its compressive strength in 1 day at ambient temperature. Based on the 210 compressive test results, a generalized rateconstant material model was presented to predict the development of compressive strengths of ESC at different equivalent ages (9, 12, 18, 24, 36, 100 and 168 h) and maximum temperatures (20, 30, 40, 50 and $60^{\circ}C$) for design compressive strengths of 30, 40 and 50 MPa. The developed material model was used to find optimum curing regimes for precast prestressed members with ESC. The results indicated that depending on design compressive strength, conservatively 25-40 % savings could be realized for a total curing duration of 18 h with the maximum temperature of $60^{\circ}C$, compared with those observed in a typical curing regime for concrete with Type I cement.

• STI Policy Review
• /
• 제4권2호
• /
• pp.55-73
• /
• 2013

Since the 1990s, the Japanese government has made considerable attempts at stimulating innovation with an aim to pull the country out of a possibly permanent economic decline. Several laws and policy initiatives were introduced to encourage better interaction between universities (and research institutions) and industry. The results of these efforts have been mixed. While the number of university-industry joint and commissioned research has increased, revenues from the licensing of university-owned patents have fluctuated year by year. Although the number of startups and spin-offs from universities rose, their long-term survival and contribution to the economy remain uncertain. The Japanese experience features both strengths and weaknesses. Strengths include the long-term commitment of policy makers, the ability to set specific targets, and the active engagement of several key economic ministries. Nevertheless, the effectiveness of these policy initiatives was hampered by limitations within the policies concerning the roles of universities and their mode of interaction with industry based on intellectual property rights, the inadequacy of demand-side innovation policies, the fragmentation of bureaucracy, and a lack of a credible evaluation system.

• 한국세라믹학회지
• /
• 제23권3호
• /
• pp.67-77
• /
• 1986

various properties and manufacturing conditions were investigated in order to synthesize the glass-ceramics of $CaO-P_2O_5$ system for bioceramics. Compositions of easy unidirectional crystallization were between 47.5 and 50, 0mol% CaO For the glass rods prepared by pulling them to about 3 times the original rod length unidirectional crystallization was easier than original glass rods. These samples were crystallized in the axial direction at 15${\mu}{\textrm}{m}$/min in an electric furnace with a temperature gradient of about 3$0^{\circ}C$/cm at 57$0^{\circ}C$. Bending strengths of surface and unidirectionally crystallized samples were investigated with various CaO/$P_2O_5$ molar ratios. The bending strengths of unidirectionally crystallized samples were larger than those of surface -crystallized samples and the value of 47.5CaO.52.5 $P_2O_5$ was 1650kg/$cm^2$. XRD patterns showed that major phase is $\beta$-Ca(PO3) with minor phase 2CaO.$P_2O_5$ Relative crystal-linity of surface-crystallized sample was inversely propertional to the bending strenth. SEM of fracture surface of unidirectionally crystallized samples revealed an unidirectionally aligned structures.

• 유통과학연구
• /
• 제11권9호
• /
• pp.43-49
• /
• 2013

Purpose - The competitiveness of small- and medium-sized distribution companies has weakened with the entry of large distribution companies and Super Super Markets (SSMs). These companies have nationwide distribution networks and capital to take over street markets, thereby threatening the very survival of small merchants. In order to help these small- and medium-sized merchants, the government has recently reinforced distribution regulations for large distribution companies. Research design, data, methodology - The purpose of this study is to review domestic and foreign distribution regulations and to provide direction for establishing domestic distribution policies in the future. Results - The government must fully reassess its assistance policy for small and medium distribution companies to enable them to engage in differentiated competition with large retailers, based on their own strengths. This will allow all interested parties to coexist. Conclusions - Government assistance policies for small and medium distributors such as traditional markets must be reorganized. The objective is to ultimately protect small and medium distributors and allow them to coexist on their own strengths, rather than have regulations for large retail stores.

• 대한한의학회지
• /
• 제33권3호
• /
• pp.10-19
• /
• 2012

Objectives: This study aimed to assess the priorities among the environmental factors on, and to build core strategies for fostering Korean medical tourism. Methods: We used an A'WOT hybrid method which combined SWOT with Analytic Hierarchy Process (AHP), that is, the strategic factors in each strengths, weaknesses, opportunities, and threats group were selected by medical tourism experts' opinion, and then the importance of the factors in each SWOT group were pair-wise compared. Results: The results presented that the opportunities and the strengths groups are relatively more important than the other groups. The key competitive factors include high-quality human resources of traditional medicine, modernized system of Korean medical institutions, and local governments' willpower to promote herbal industries. Conclusions: Based on the results of analysis, it is suggested for government to build a timely strategic plan, to enhance cooperative activities with the private sector, to organize local resources, and to provide marketing support.

• 한국농공학회지
• /
• 제38권6호
• /
• pp.64-73
• /
• 1996

The three-dimensional strength behavior of compacted decomposed granite soil was studied using cubical triaxial tests with independent control of the three principal stresses. All specimens were loaded under conditions of principal stress direction fixed and aligned with the directions of compacted plane. For comparable test conditions, the major principal strain and volume strain to failure were smallest when the major principal stress acted perpendicular to the compacted plane. The opposite extremes were obtained when the major principal stress acted parallel to the compacted plane. In cubical triaxial tests with same b values and with ${\theta}$ values in one of three sectors of the octahedral plane, independent of the range of ${\theta}$, higher friction angles are obtained in tests with b greater than in triaxial compression tests in which b 0.0, Comparison between the results of the drained cubical triaxial tests on lksan compacted decomposed granite soil and the cross section of the Mohr-Coulomb failure surface as well as the cross section of the Mohr-Coulomb failure surface were made. Lade's isotropic failure criterion based on vertical specimens overestimates the strengths for tests performed with values of 0 between 90˚ and 1 50˚ the Mohr-Coulomb criterion generally underestimates the strengths of tests performed with values of ${\theta}$ between $0^{\circ}$ and $180^{\circ}$ except around the $120^{\circ}$.

• 천문학회보
• /
• 제38권1호
• /
• pp.41.2-41.2
• /
• 2013

We present the statistical properties of a volume-limited sample of 7,429 nearby (z = 0.033-0.044) galaxies from the Sloan Digital Sky Survey Data Release 7. By performing a visual inspection, we classified our sample galaxies according to the Hubble sequence (Hubble 1926, 1936). Then we excluded apparently smaller and flatter galaxies from our database because morphology classification on them turned out to be difficult. Our results cover structural (e.g. concentration index, color, magnitude, stellar mass, etc.), spectroscopic (e.g. velocity dispersion, $H{\beta}$ absorption line, Fe absorption line, Mg absorption line, accretion rate, $H{\alpha}$ emission line, etc.), and environmental (e.g. density, etc.) properties of each morphology type based on morphology distribution. For this analysis, we used the recent re-measurements of spectral line strengths by Oh and collaborators (2011). Our statistics confirm the up-to-date understanding on galaxy populations, e.g., correlations between morphology and line strengths and in turn derived ages and so on.