• 한국건축시공학회지
• /
• 제18권2호
• /
• pp.99-107
• /
• 2018

이 연구의 목적은 기존 철근콘크리트 기둥의 내진보강을 위한 단면 확대보강공법에서 보조 띠철근으로써 배근할 수 있는 V-타이의 상세를 제시하는 것이다. 모두 24개의 직접 인발실험체에서 V-타이의 역학적 거동을 고려한 부착강도 관점에서 선택한 주요 변수는 V-타이의 형상, 묻힘길이 및 콘크리트 강도이다. 다양한 상세를 갖는 V-타이의 부착강도는 일반 V-타이의 부착강도 및 CEB-FIP 제안식과 비교하였다. 그 결과 보강단면의 두께가 기존 V-타이의 묻힘 길이[= max(75mm, $6d_b$)]보다 적은 기둥의 경우 단부 압착형의 V-타이가 보조 띠철근로 추천될 수 있었는데, 여기서 $d_b$는 V-타이로 사용된 철근의 직경이다.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 2부
• /
• pp.18-23
• /
• 2008

과거의 전통적인 마케팅 방법론들과 그 이론을 믿어온 기업의 경영자들은 소비자의 사고 과정을 합리적이고 이성적인 행위라고 규정하였다. 하지만 최근 발표되는 다양한 연구결과들에 의하면 소비자의 사고 과정은 무의식적 영역에서 감성에 의해 일어나는 행위에 가깝다. 이러한 소비자의 사고 과정은 제품을 구매하는 과정, 즉 소비자의 구매 결정 과정에도 영향을 미친다. 소비지는 제품 구매 시, 가격, 성능, 품질 등의 다양한 이성적 기준에 의해 제품을 판단하지만 결국 구매는 제품에 대한 좋고 나쁨의 감성적 기준에 의해 결정된다. 브랜드 이미지는 소비자의 무의식적 영역에서 형성된 브랜드에 대한 심상으로 감성적 가치를 갖으며 소비자의 제품 구매에 영향을 미친다. 따라서 긍정적인 감성의 결합을 통한 제품 개발은 감성적인 제품 이미지의 구축으로 연결되는 제품의 판매와 브랜드 이미지 강화의 중요한 요소이다. 이러한 관점에서 본 연구는 브랜드 이미지 강화의 한 요인으로써 효율적이고 감성적인 의사 전달 방식인 스토리텔링을 적용한 제품 개발 프로세스의 제안을 목표로 하여 내용을 구성하였다.

• 열처리공학회지
• /
• 제10권4호
• /
• pp.255-265
• /
• 1997

Precipitation and strengthening mechanisms in squeeze cast Mg-8.5wt%Li-4.5wt%Al have been investigated by differential scanning calorimetry(DSC), scanning electron microscopy(SEM), in-situ and ex-situ X-ray diffraction analysis and hardness measurement. Special emphasis was placed on the investigation of the precipitation behavior by the DSC technique. Microstructural and calorimetric analysis showed that ${\theta}$ and ${\delta}$ precipitates in the b.c.c. ${\beta}$ phase matrix, forming two exothermic peaks at the temperature ranges of $130^{\circ}C{\sim}180^{\circ}C$ and $236^{\circ}C{\sim}280^{\circ}C$. ${\theta}$ and ${\delta}$ dissolve into the matrix forming an endothermic peak at the temperature range of $280^{\circ}C{\sim}352^{\circ}C$. The as-cast microstructure consists of ${\alpha}$, ${\beta}$ and ${\delta}$. Peak strength was obtained after aging for 1 hour at $50^{\circ}C$. The aging time required for the peak strength decreased as the aging temperature increases. The hardness decrease during overaging was due to the coarsening of ${\theta}$ precipitates. Microhardness measurement showed that variation of the hardness of ${\beta}$ matrix was more pronounced than that of the ${\alpha}$ phase, indicating that the ${\beta}$ phase is more responsible for the strengthening of the Mg-8.5wt%Li-4.5wt%Al alloy.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권3호
• /
• pp.132-142
• /
• 2007

본 연구에서는 Sprayed FRP 공법을 이용하여 보강된 철근 콘크리트 전단 파괴형 기둥의 구조성능을 평가하기 위하여 2/3 크기로 축소된 총 6개의 기둥 실험체를 제작하여, 일정한 축하중 (0.1Agfc')하에서 반복 횡하중을 가력한 구조 실험을 수행하였다. 4개의 실험체는 유리 및 탄소 단섬유와 에폭시 및 비닐에스테르 수지를 조합하여 Sprayed FRP로 보강하였으며, 또한 비교 목적을 위하여 고강도 탄소섬유시트(CFS)로 보강된 실험체 1개와 무 보강 실험체 1개를 포함하였다. 실험결과, Sprayed FRP로 보강된 실험체의 최대내력은 무 보강 실험체 대비 10~30%가 증가 하였을 뿐만 아니라, 연성은 약 1.15배 향상되어, 본 연구에서 제안한 Sprayed FRP 공법은 충분한 보강효과가 기대되는 신기술 이라고 판단된다.

• 한국프랜차이즈경영연구
• /
• 제10권4호
• /
• pp.7-18
• /
• 2019

Purpose: This study identifies the relative importance of the sub - factors of initial services and continuous services using AHP (Analytic Hierarchy Process) method, and calculates the competitive index for the detailed factors. The purpose of this paper is to propose the establishment of long - term and short - term management strategy for expansion of business of food service franchise, franchisors, long - term and win - win relationship with franchisees, and rationalization of operating system. Research design, data, and methodology: The population for the survey is 92 franchisees in 46 foreign brands and 46 domestic brands in the Seoul metropolitan area (Seoul / Gyeonggi / Incheon). The survey was conducted from July 1 to August 31, 2018 through the survey agency with a telephone interview and a surveyor's direct visit. A total of 100 questionnaires were collected, but a total of 92 parts were used for analysis except 8 parts that were considered to contain false information. Using the AHP method, relative importance and competitiveness index were calculated for the details of initial services and continuous services. Results: The results shows continuous services were significantly higher for both foreign brand franchises, domestic brand franchises, and overall than initial services, This suggests that the continuous services of the affiliated franchisors has a higher relative importance than the initial services. Among the continuous services, brand reinforcement and promotion were significantly higher for both foreign brand merchants and domestic brand franchises. This can be regarded as the most important factor in brand reinforcement and promotion when selecting a food service franchisors. Conclusions: In the Standard Terms and Conditions governed by the Fair Trade Commission, the franchisors should increase the fairness by creating manuals for supporting services, especially after opening, and regularly checking whether the supporting services have been carried out like manuals since the establishment of franchisees. In addition, the Brand Strengthening and Public Relations Committee (tentative name) jointly participated by the franchisors and franchisees for the purpose of strengthening and promoting the brand, suggesting a system for transparent and efficient execution of the brand reinforcement and promotion budget and monitoring afterwards.

• Journal of Nutrition and Health
• /
• 제38권3호
• /
• pp.251-258
• /
• 2005

The purposes of this study were to conceptualize the Home Meal Replacement (HMR) in Korea and to gather professionals' opinions of prospect and task for HMR industry in Korea. A total of 67 experts participated in a three round survey by Delphi technique, which was used to integrate and share the each expert's professional idea. According to the result, HMR was translated into 'Gajeongsiksa daeyongsik' in Korean and given definition to 'a meal taken directly or through brief cooking process at home by purchasing ready to eat or ready to end-cook type of food'. As the result of categorizing HMR products of Korean food, 'I. Ready to eat' such as side dishes, kimchi, salad, sandwich, kimbab, and so on and 'II. Ready to heat' such as rice, porridge, retort food (soup, broth, curry, spaghetti, etc.), frozen pizza, grilled food, jabchae, instant soup, and so on were construed in a limited sense of the HMR. In addition, 'III. Ready to end-cook' such as frozen dumpling, frozen pork cutlet, seasoned meat, powder-type soup, and so on as well as these two kinds were interpreted in a broad sense of the HMR. In the prospect of HMR industry in Korea, the Korean HMR industry would develop continuously accompanied by increasing of consumers using HMR products. Introduction and generalization of HMRs would serve the convenience for meal preparation and then influence the change of home meal pattern. Nevertheless, it was concerned about that using HMRs might have limitation on solving the problems of dietary life including irregular meal, skipping a meal, and so on and influence the nutrition imbalance. For the development of HMRs, developing various menu and the packaging materials for HMR products, constructing the thorough sanitary management, and strengthening R & D for the HMR of Korean food were the future tasks in Korean HMR industry.

• Journal of Chest Surgery
• /
• 제50권6호
• /
• pp.436-442
• /
• 2017

Background: Dissection flaps in acute type A aortic dissection typically extend into the root, most frequently into the non-coronary sinus (NCS). The weakened root can be susceptible not only to surgical trauma, but also to future dilatation because of its thinner layers. Herein, we describe a new technique that we named the "neo-adventitia" technique to strengthen the weakened aortic root. Methods: From 2012 to 2016, 27 patients with acute type A aortic dissection underwent supracommissural graft replacement using our neo-adventitia technique. After we applied biologic glue between the dissected layers, we wrapped the entire NCS and the partial left and right coronary sinuses on the outside using a rectangular Dacron tube graft that served as neo-adventitia to reinforce the dissected weakened wall. Then, fixation with subannular stitches stabilized the annulus of the NCS. Results: There were 4 cases of operative mortality, but all survivors were discharged with aortic regurgitation (AR) classified as mild or less. Follow-up echocardiograms were performed in 10 patients. Of these, 9 showed mild or less AR, and 1 had moderate AR without root dilatation. There were no significant differences in the size of the aortic annulus (p=0.57) or root (p=0.10) between before discharge and the last follow-up echocardiograms, and no reoperations on the aortic roots were required during the follow-up period. Conclusion: This technique is easy and efficient for reinforcing and stabilizing weakened roots. Furthermore, this technique may be an alternative for restoring and maintaining the geometry of the aortic root. An externally reinforced NCS could be expected to resist future dilatation.

• 콘크리트학회논문집
• /
• 제18권3호
• /
• pp.431-438
• /
• 2006

화재 피해 콘크리트 건축물의 기존 손상도 평가 방법은 명확한 손상 깊이를 정량적으로 추정하기가 어렵고, 특히 코아 압축강도 테스트는 콘크리트 깊이별로 수열온도 따라 손상도의 변화를 반영하지 못하고 손상 공시체의 압축강도를 구조체 압축강도 저하의 대표 값으로 사용하게 되어 손상 깊이의 판단이 어려운 불합리한 점이 있다. 따라서 본 연구에서는 화재 피해를 입은 철근콘크리트 슬래브나 벽체 부재의 손상 깊이를 정량적으로 평가하기 위해서, 공시체를 대상으로 전기로에서 일면 가열한 후, 2cm 두께로 절편화시켜 색조분석, 흡수율 및 할렬인장강도실험에 의한 압축강도를 분석함으로써 공시체 깊이별 손상 깊이를 정량적으로 평가하는 실험기법을 제안하고 고온에 노출된 콘크리트의 특성변화를 고찰함으로써 그 적용성을 검증하였다. 실험결과, 본 연구에서 제안한 손상도 평가기법은 가열조건 및 강도별로 공시체 깊이에 따른 잔존강도의 정량적 평가가 가능하였으며, 이 결과를 이용하여 화재를 경험한 슬래브나 벽체의 보수보강 범위를 선정하는 판단 기준으로 활용할 수 있는 것으로 나타났다.

• 비파괴검사학회지
• /
• 제36권5호
• /
• pp.391-398
• /
• 2016

음향방출기법은 구조물에 존재하는 손상 및 손상 메커니즘을 규명하는 가장 유효한 비파괴검사 수단으로 널리 이용되고 있다. 그러나 기존의 손상위치표정 기법은 탄성파 전파 속도에 크게 의존하는 기법의 한계에 의하여 복합재료 또는 이종의 재료로 구성된 구조물에서의 손상을 탐지하기 어려운 한계점을 가지고 있다. 최근 다양한 분야에서 사용되고 있는 압축천연가스(CNG) 저장용기는 무게와 강성의 효율을 위하여 복합재료를 사용하여 외부를 보강하는 새로운 형태의 구조를 사용하고 있다. 이러한 다층 복합소재의 사용으로 기존의 손상탐지기법으로는 저장용기의 외부에서 가해지는 충격 혹은 결함에 의한 저장탱크에 발생한 손상의 측정이 매우 어렵게 되었다. 이러한 한계를 극복하기 위하여 본 연구에서는 선행연구를 통하여 개발된 에너지 기반 contour D/B map 기법을 이용하여 4 가지 형식의 CNG 저장탱크에 발생한 외부 충격 신호의 손상 위치를 측정하였다. 각각의 형식의 저장탱크에서 측정된 손상 위치 결과를 비교 분석하여 새로운 기법의 측정 성능을 알아보았다.

• Earthquakes and Structures
• /
• 제12권2호
• /
• pp.237-250
• /
• 2017

There has been increasing attention in many countries on seismic retrofit of old fashioned RC structures in recent years. In such buildings, the joints lack transverse reinforcement and suffer inadequate seismic dimensional requirements and the reinforcement is plain bar. The behavior of the joints is governed by sliding of steel bars and diagonal shear failure is less influential. Different methods to retrofit beam-column joints have been proposed in the literature such as wrapping the joint by FRP sheets, enlargement of the beam-column joint, and strengthening the joint by steel sheets. In this study, an enlargement technique that uses external prestressed cross ties with steel angles is examined. The technique has already been used for substructures reinforced by deformed bars and has advantages such as efficient enhancement of seismic capacity and lack of damage to the joint. Three reference specimens and two retrofitted units are tested under increasing lateral cyclic load in combination with two levels of axial load. The reference specimens showed relatively low shear strength of 0.150${\surd}$($f_c$) and 0.30${\surd}$($f_c$) for the exterior and interior joints, respectively. In addition, relatively brittle behavior was observed and large deformations extended into the panel zone of the joints. The retrofit method has increased ductility ratio of the interior beam-column joints by 63%, and energy dissipation capacity by 77%, relative to the control specimen; For external joints, these values were 11%, and 94%. The retrofit method has successfully relocated the plastic joints far from the column face. The retrofit method has improved shear strength of the joints by less than 10%.