• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.181-189
• /
• 2001

Recently, the need for strengthening reinforced concrete(R.C.) structure has been increased, particularly when there is an increase in load requirements, a change in use, a degradation problem, or design/construction defects. The use of composite materials for structural repair presents several advantages and has been investigated all over the world. It is well known that the incorporation of carbon fiber sheet(CFS) with concrete is one of the most effective ways to strengthen the R.C. structure. In this papers, experimentally investigated the ductile behavior of the R.C. beams strengthened with CFS, and provided the basic data for design of R.C. beams strengthened with CFS. Tests were carried out with 15 beams ($20cm{\times}30cm{\times}240cm$) reinforced with CFS, and with parameters including and the ratio of tensile reinforcement to that of balanced condition and number of CFS. The results show that strengthened and non-strengthened beams exhibit different ductile behovior. Non-strengthened beams showed increase of ductility as amount of the tensile reinforcement decreased. However, bearing capacity of the CFS-strengthened beams are dictated by the strength of the CFS layers that a very high ductility is indicated for the beams with large number of CFS.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권1호
• /
• pp.147-156
• /
• 2004

최근에 구조적인 손상을 입은 철근콘크리트 구조물은 내구성과 내력 향상을 위해 보수 보강이 필요하게 되었다. 본 연구에서는 철근콘크리트 보가 휨에 의해서 손상되었을 경우 손상이전의 상태로 내력복원을 할 수 있는지를 규명하고자 한다. 실험결과 기준실험체와 강판 탄소섬유시트 격자탄소섬유판으로 보강한 실험체를 비교할 때, 휨내력은 상승하였고, 연성도와 에너지흡수능력도 기준실험체에 비해 큰 차이를 보이지 않아 보강재인 강판 탄소섬유시트 격자탄소섬유판(복합재)은 R.C보의 휨보강재로 매우 우수한 성능을 보유하고 있다고 판단된다.

• Steel and Composite Structures
• /
• 제39권4호
• /
• pp.453-469
• /
• 2021

The cracking at the transverse diaphragm cutout is one of the most severe fatigue failures threatening orthotropic steel decks (OSDs), whose mechanisms and crack treatment techniques have not been fully studied. In this paper, full-scale experiments were first performed to investigate the fatigue performance of polished cutouts involving the effect of an artificial geometrical defect. Following this, comparative experimental testing for defective cutouts strengthened with carbon fiber-reinforced polymer (CFRP) was carried out. Numerical finite element analysis was also performed to verify and explain the experimental observations. Results show that the combinative effect of the wheel load and thermal residual stress constitutes the external driving force for the fatigue cracking of the cutout. Initial geometrical defects are confirmed as a critical factor affecting the fatigue cracking. The principal stress 6 mm away from the free edge of the cutout can be adopted as the nominal stress of the cutout during fatigue evaluation, and the fatigue resistance of polished cutouts is higher than Grade A in AASHTO specification. The bonded CFRP system is highly effective in extending the fatigue life of the defective cutouts. The present study provides some new insights into the fatigue evaluation and repair of OSDs.

• 콘크리트학회논문집
• /
• 제20권6호
• /
• pp.765-772
• /
• 2008

철근콘크리트 구조물은 일반적으로 재료적 특성에 따른 크리프 및 건조수축으로 인하여 장기변형이 발생하며, 이러한 변형으로 인한 구조물의 처짐을 허용 한계 이하로 유지시키는 것이 사용성 확보 측면에서 중요하다 할 수 있다. 노후된 RC보의 성능 개선을 위하여 다양항 보수 보강 방법이 사용되고 있으며 이중 대표적인 방법으로 FRP 외부부착 공법이 있다. 재료적인 성질이 우수한 FRP는 RC구조물의 보강 재료로써 현재 널리 사용되고 있으며, 일시적인 하중 뿐만 아니라 지속 하중 하에서도 향상된 보강 성능을 제공해야 한다. 따라서 FRP가 외부 부착된 RC 부재에 지속 하중이 작용할 때 콘크리트의 크리프 및 건조수축의 영향으로 인한 시간 의존적 장기 거동을 정확히 예측하는 방법이 필요하다. 본 논문에서는 FRP가 외부 부착된 RC보의 장기 처짐 예측을 위해서, CFRP와 GFRP로 보강된 실험체를 제작하고, 25 kN의 지속하중을 470일간 가하여 시간 변화에 따른 처짐을 측정하였다. 또한, 이러한 처짐의 예측을 위하여 ACI-209 code 및 CEB-FIP code에 근거하여 크리프계수와 건조수축변형률을 산정하였으며, EMM과 AEMM을 사용한 ACI-318기준, Branson's method 그리고, Mayer's method를 사용하여 FRP가 외부 부착된 RC보의 장기 처짐을 예측하였다. 실험 결과, CFRP보 보강된 실험체가 가장 높은 장기 사용성을 보였으며, Mayer's method가 장기처짐에 대한 실험값을 가장 근사하게 예측한다는 것을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.511-523
• /
• 2015

Damaged steel-concrete composite girders can be repaired and retrofitted by epoxy-bonded carbon fiber-reinforced polymer (CFRP) sheets to the critical areas of tension flanges. This paper presents the results of a study on the behavior of damaged steel-concrete composite girders repaired with CFRP sheets under static loading. A total of seven composite girders made of I20A steel sections and 80mm-thick by 900mm-wide concrete slabs were prepared and tested. CFRP sheets and prestressed CFRP sheets were used to repair the specimens. The specimens lost the cross-sectional area of their tension flanges with 30%, 50% and 100%. The results showed that CFRP sheets had no significant effect on the yield loads of strengthened composite girders, but had significant effect on the ultimate loads. The yield loads, elastic stiffness, and ultimate bearing capacities of strengthened composite girders had been changed as a result of prestressed CFRP sheets, the utilization ratio of CFRP sheets could be effectively improved by applying prestress to CFRP sheets. Both the yield loads and ultimate bearing capacities had been changed as a result of steel beam's flange damage level and CFRP sheets could cover the girders' shortage of bearing capacity with 30% and 50% flange damage, respectively.

• 대한족부족관절학회지
• /
• 제22권2호
• /
• pp.55-61
• /
• 2018

Chronic lateral ankle instability is a major complication of acute ankle sprains, which can cause discomfort in both daily and sports activity. In addition, it may result in degenerative changes to the ankle joint in the long term. An accurate diagnostic approach and successful treatment plan can be established based on a comprehensive understanding of the concept of functional and mechanical instability. The patients' history and correct physical examination would be the first and most important step. The hindfoot alignment, competence of the lateral ligaments, and proprioceptive function should be evaluated. Additional information can be gathered using standard and stress radiographs. In addition, concomitant pathologic conditions can be investigated by magnetic resonance imaging. Conservative rehabilitation composed of the range of motion, muscle strengthening, and proprioceptive exercise is the main treatment for functional instability and mechanical instability. Regarding the mechanical instability, surgical treatment can be considered for irresponsible patients after a sufficient period of rehabilitation. Anatomic repair (modified $Brostr{\ddot{o}}m$ operation) is regarded as the gold standard procedure. In cases with poor prognostic factors, an anatomical reconstruction or additional procedures can be chosen. For combined intra-articular pathologies, arthroscopic procedures should be conducted, and arthroscopic lateral ligament repair has recently been introduced. Regarding the postoperative management, early functional rehabilitation with short term immobilization is recommended.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.491-496
• /
• 2001

In recent years, the research and development about the new material proceed rapidly and actively in the building industry. As building structures become bigger, higher and more specialized, so does the demand for material with higher strength. In the future, we will need to research repair and rehabilitation to make high strength concrete mixed steel fibrous building safe. The carbon fiber reinforced plastic bonding method is widely used in reinforcing the existing concrete structure among the various methods. The repair of initiate loaded reinforced high-strength concrete beams mixed steel fibrous with epoxy bonded Carbon Fiber Sheets(CFS) was investigated experimentally. The CFS thickness and length were varied to assess the peel failure at the curtailment of CFS, The behaviour of the repaired beams was represented by load-longitudinal steel strain relation and failure modes were discussed. The test results indicate that CFS is very effective for strengthening the demand beams and controlling deflections of reinforced high strength concrete beams mixed steel fibrous happen diagonal crack, the increase in the number of CFS layers over two layers didn't effect the increase in the strength of beams.

• Structural Engineering and Mechanics
• /
• 제47권4호
• /
• pp.575-598
• /
• 2013

The study presents the results of an experimental program concerning the shear force transfer between reinforced concrete (RC) jackets and existing columns with damages. In order to investigate the effectiveness of the repair method applied and the contribution of each shear transfer mechanism of the interface. It includes 22 concrete columns (core) (of 24,37MPa concrete strength) with square section (150mm side, 500 mm height and scale 1:2). Ten columns had initial construction damages and twelve were subjected to initial axial load. Sixteen columns have full jacketing at all four faces with 80mm thickness (of 31,7MPa concrete strength) and contain longitudinal bars (of 500MPa nominal strength) and closed stirrups spaced at 25mm, 50mm or 100mm (of 220MPa nominal strength). Fourteen of them contain dowels at the interface between old and new concrete. All columns were subjected to repeated (pseudo-seismic) axial compression with increasing deformation cycles up to failure with or without jacketing. Two load patterns were selected to examine the difference of the behavior of columns. The effects of the initial damages, of the reinforcement of the interface (dowels) and of the confinement generated by the stirrups are investigated through axial- deformation (slip) diagrams and the energy absorbed diagrams. The results indicate that the initial damages affect the total behavior of the column and the capacity of the interface to shear mechanisms and to slip: a) the maximum bearing load of old column is decreased affecting at the same time the loading capacity of the jacketed element, b) suitable repair of initially damaged specimens increases the capacity of the jacketed column to transfer load through the interface.

• 디지털융복합연구
• /
• 제13권8호
• /
• pp.473-481
• /
• 2015

강 유역의 홍수 및 환경 감시망은 고품질의 영상정보를 고속으로 전달할 수 있는 광통신 장치와 함께 각종 센서로 부터의 정보를 효율적으로 관리할 수 있는 방법이 요구되는 네트워크이다. 특히, 네트워크의 절단이나 노화로 인한 통신장애들은 현장에서의 신속한 복구가 매우 중요하기 때문에 다양한 연구가 진행되고 있다. 그러나, 국가 기간망과 같은 환경 감시망은 외부의 해킹이나 불법적인 목적의 외부침입에 대한 보안이 매우 중요하기 때문에 보안성과 신뢰성을 만족하면서도 효율적인 네트워크 유지보수가 가능하도록 하여야 한다. 이와같은 요구사항은 보안성을 제고하면 유지보수의 효율성이 떨어지는 서로 상충되는 특성을 가지고 있다. 따라서 본 연구에서는 보안성을 제고하기 위해 단방향 Bypass TAP를 개발하고 효율적인 유지보수가 가능하도록 안드로이드기반의 스마트폰용 앱을 개발하여 상반된 요구사항을 충족시킬 수 있도록 하는 시스템을 제안한다. 제안된 시스템은 통신 전송망 및 다양한 시설의 관리망 등 인터넷으로 부터의 침입에 의한 위험등에 대한 보안이 필요한 분야에서 폭넓게 이용될 것으로 판단된다.

• 한국전산구조공학회논문집
• /
• 제16권3호
• /
• pp.261-269
• /
• 2003

최근 강교량이나 선박과 같은 강구조물에 있어서 여러 가지 환경요인에 의해 균열 및 부식 등의 문제가 다수 발생되어지고 있다. 이러한 문제를 해결하기 위해 보수용접을 사용할 수 있다. 이러한 보수용접은 절단이라는 과정을 필연적으로 수반하고 있다. 따라서 이러한 절단 줄 얻어지는 잔류응력의 예측은 구조물의 안전이라는 측면에서 중요하다고 할 수 있다. 본 연구에서는 2차원 및 3차원 유한요소 해석을 수행하여 가스절단에 의해 얻어진 절단잔류응력을 구하였으며, 2차원 및 3차원 해석기법의 정도를 명확히 하였다. 2차원 및 3차원 해석을 수행하여 얻은 절단잔류응력의 분포 및 그 절대치는 유사한 값을 나타내었다.