• Journal of the Korea Concrete Institute
• /
• v.26 no.5
• /
• pp.627-634
• /
• 2014

In this study, standoff detonation tests and static beam tests on $160{\times}290{\times}2200mm$ RC beams were conducted to investigate the effect of local damage on the flexural strength and ductility index. And also, blast resistance of RC beams strengthened with steel fiber and FRP sheet were evaluated by these tests. The standoff detonation tests were performed with charge weight of 1kg and standoff distance of 0.1m. After the tests, crater diameters and loss weights of specimens were measured to evaluate the local damage of specimens. Flexural strength and ductility index were measured by conducting the static beam tests on the damaged and undamaged specimens. As a test results, normal concrete specimen(NC) showed relatively large crater and spall diameters that caused weight loss of 23.5kg as a local damage. Whereas, steel fiber reinforced concrete specimen(SFRC) and FRP sheet retrofitted specimens(NC-F, NC-FS) showed higher blast resistance than NC by reducing crater size and weight loss. Flexural strength and ductility index were decreased in case of local damaged specimens by detonation. Especially, large decrease of flexural strength was shown in NC as compared with intact specimen and brittle failure was occurred due to buckling of compressive reinforcement. In case of specimens strengthened with steel fiber and FRP sheet, residual flexural strength and ductility index were increased as compared with NC. In these results, it is concluded that critical local damage can be occurred unless enough standoff distance can be assured even if the charge weight is small. and it is verified that strengthening method using steel fiber and FRP sheet can increase blast resistance.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.311-322
• /
• 2012

Restoration materials used to investigate effects of fluorine such as enamel strengthening and anti-caries effects in several types of dental restoration materials were five kinds including Ionoseal(VOCO GmbH, Cuxhaven, Germany), Fuji Filling LC(GC Co. Tokyo, Japan), Quadrant Universal LC(CAVEX Holland BV, Netherlands), PermaCem$^{(R)}$(DMG, Hamburg, Germany) and Dyract$^{(R)}$ AP(Dentsply GmbH, Germany), and the amount of fluorine-releasing was measured with ICS-5000 Reagent-FreeTM Ion Chromatography(RFICTM, Dionex, U.S.A.). The results of this study are as follows. 1. In all types of restoration materials, the amount of fluoride-releasing was reduced with time passage and it was declined sharply to show significance in four weeks. Fuji Filling LC(12.445PPM) or resin-reinforced glass ionomer and PermaCem$^{(R)}$(16.121PPM) or compomer were found to release fluorine for a long term(P<.001). 2. Ionoseal(0.887PPM) or glass ionomer and Quadrant Universal LC(0.957PPM) or composite resin released a few fluorine of 1PPM or less than 1PPM after one week, and Dyract$^{(R)}$ AP or compomer released fluorine of 8.631PPM in one week and its amount of releasing decreased dramatically in two and four week by recording 0.175PPM and 0.116PPM, respectively. Therefore, the effect of releasing fluorine in four weeks was observed to be poor (P<.001). 3. Fuji Filling LC or resin-reinforced glass ionomer and PermaCem$^{(R)}$ or compomer released fluorine of 33.372 and 1.902PPM, respectively in one week and their amount of releasing increased to be 36.371 and 18.223PPM, respectively in two weeks. So, their amount of fluorine-releasing recorded the highest levels in two weeks(P<.001).

• Journal of Internet Computing and Services
• /
• v.15 no.6
• /
• pp.133-144
• /
• 2014

As the Internet and smartphones prevail, this study investigated the purchasing factors of a new beauty marketing method, the social commerce, and verified the relationship of such purchasing factors to consumer satisfaction and repurchasing intentions. In order to verify the validity of purchasing factors, five sub-factors, such as service, price, interaction, convenience, and interest were classified, while consumer satisfaction and repurchasing intentions are grouped into one factor, using data about 20-39 years old. According to results of this study, purchasing factors in the beauty service markets through social commerce that had effects on the consumer satisfaction were price, service, convenience, and interest, but no relationship was found with interaction. We can predict that consumers buy not based on community activities among buyers or purchasing comments of others, but rather his/her own subjective thoughts and opinions about the services. As the result of repurchasing intention according to purchasing factors, affecting sub-factors were price, service, and convenience. Repurchasing intention is an positive response that reflects satisfactions. Since low price, satisfaction on the service, and convenience for busy modern people should be met, repurchasing intentions are not affected by interest, but rather systematic and professional service. Also, higher satisfaction on service raises repurchasing intention. In this study, it is clear that not only purchasing factors through social-commerce effect the satisfaction and the repurchasing intention, but also consumer satisfaction mediates partly purchasing factors and the repurchasing intention. And as sub-factors of purchasing factors, price, service, or convenience are more important to the consumer satisfaction than community or replies activities. Thus differentiated and professional customer service, the establishment and enhancement of trendy marketing should improve long term repurchasing intentions. This will lead to the increasing revenue of personal-shop and the developments of beauty markets, so strengthening product sourcing and promotion suitable for mobile shoppers are essential.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.158-170
• /
• 2013

With the recent 'Creative economy' and 'Cultural prosperity' coming to the fore as a new code to build up a city or a region, it is necessary to focus on strengthening the regional creative capacity as well as developing spontaneous regional culture. In such trend this research aims to explore the Kyunglidan-gil, Seoul, Korea in which creative-class are appearing autogenously in clusters and forming new cultural landscape, to identify the factors of their accumulation and changing aspect of cultural landscape. This study has the following purposes: First, Investigating the historical context of the Kyunglidan-gil's landscape. Second, considering the process of the creative-class being flowed into the Kyunglidan-gil as the subject leading to the modification of the region. Third, their activity was analyzed to consider the unique aspect of forming the cultural landscape at the Kyunglidan-gil. Regarding why the creative-class should flow in, results of the study drew five factors including region in issue compared to inexpensive rents, coexistence with nature, quiet atmosphere seeming isolated from the urban confusion, location possible to test and share individual materials one likes, and a site with synergy effect of activity through the network with acquaintances. Also, five characteristics of cultural landscape forming by the people's activity were drawn - space of communication for increasing creativity, temporary and flexible spatial use, expression of one's identity and taste, distinguishing, and positive use of the existing facilities. Like this, by exposing the 'creative-class', a subject of the leader in changing process of the Kyunglidan-gil, this research identified the aspect of forming cultural landscape.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.163-174
• /
• 2006

The purpose this study is to discuss effects of product design innovations on small and medium enterprises' business accomplishments and further on raising those enterprises' international competitiveness through reviewing previous studies that quantitatively analyzed economic and technological performance and ripple effects of products developed through design innovations. To determine how much design innovations are influential and contributing to small and medium enterprises' international competitiveness, then, the researcher took most advantage of statistical data from quantitative analyses of business accomplishments brought by design innovation development and investment, or economic effects like sales and exports increase. Results of the study can be summarized as follows. First, product design innovations by small and medium enterprises directly contribute to creating plenty of technological and economical achievements, for example, improved product quality, increased product profitability, the effect of product differentiation, improved price competitiveness and increased business sales and exports. Second, technological and economic achievements brought by product design innovations can directly lead to ripple effects like accumulating related knowledge and know-hows, strengthening the competitiveness of products, improving corporate image, increasing business sales and net profit, and meeting many different consumer requirements. Third, technological and economic achievements and ripple effects brought by product design innovations all become very important factors and sources on which small and medium enterprises strengthen their international competitiveness in world markets and maintain their sustainable competitive advantage. Fourth, business accomplishments or economic effects brought by design innovations can be quantitatively measured and analyzed with statistical data. Additional data from the moves can help understand and express the very value or nature of design in a quantitative way. This study is significant in that its results was made based on statistical data from empirical, objective measurements and quantification. The researcher hopes that the study contributes to promoting design innovations by small and medium enterprises and helps CEOs of those businesses better understand the very value and nature of design.

• Journal of Chest Surgery
• /
• v.35 no.2
• /
• pp.94-101
• /
• 2002

All kinds of tissue valves must be pretreated for the inactivation of immunologic properties and the strengthening of tissue before implantation. However, the tissue valves are gradually denatured with the calcification process and they eventually lose their functions. Recent reports have shown the existence of specific calcium binding non collagenous proteins in the calcified area of implanted biomaterials. This experiment was intended to confirm the effect of pretreatment with RGDS(Arg-Gly-Asp-Ser) tetrapeptide on the calcification of subcutaneously implanted bovine pericardium in rats. RGDS tetrapeptide has the same amino acid sequence of attachment site of specific calcium binding non collagenous proteins. Material and Method: All bovine pericardial pieces were fixed with 0.6% glutaraldehyde. The pretreatments were done using 5 different methods, groupI, with normal saline for 60 minutes, groupII, with 0.5% GRSD(Gly-Arg-Scr-Asp) tetrapeptide solution for 60 minutes, group III : with 0.5% RGDS(Arg-Gly-Asp-Ser) tctrapeptide for 30 minutes, group IV ; with 0.5% RGDS for 60 minutes, and group V : with 0.5% RGDS for 120 minutes. The pretreated bovine pericardial pieces were implanted subcutaneously at the abdominal sites of rats. 30 days after the implantation, the implanted bovine pericardial tissue were examined radiologically, biochemically, and histologically to measure the severity of calcification. Result: On the radiological examination, group I ; 68.42$\pm$3.06, group II , 64.25$\pm$5.58 showed significant difference with group III: 48.00$\pm$3.57, group IV; 43.67$\pm$2.31, and group V ; 2.58$\pm$2.47(p<0.05). There was no difference between group I and II(p=0.105). On the biochemical examination, the amount of calcium in group I was , 33.09$\pm$6.59 mg, in group II ; 28.12$\pm$5.50mg, in group III ; 25.42$\pm$7.67mg, in group Ⅵ ; 20.51$\pm$5.11mg, and in group V : 15.43$\pm$4.25mg.

• KDI Journal of Economic Policy
• /
• v.32 no.2
• /
• pp.144-170
• /
• 2010

This paper considers the effect of various types of procurement auction system on competition focusing on the rate of successful bidding. We analyze the number of bidders and the rate of successful bids using online procurement data of the Public Procurement Service. The average number of bidders is 301 and the average rate of successful bids is 87.42% while the weighted average rate is 75.13%. These numbers show that there is quite strong competition among bidders and the rate is lower as the expected price is higher. When we analyze the data of price procurement auction, the rate is also shown to be lower as the expected price is higher. Furthermore, the rate decreases as the number of bidders increases which naturally makes the competition stronger. Meanwhile, the analysis finds that the inclusion of the onsite bidding, the PQ(Pre-Qualification) result, or major-10 winning companies cannot explain the rate much in our data. In case of turnkey-alternative, the average rate of successful bidding for 484 cases record 90.20%. The average is 84.89% with 120 alternatives and 91.97% with 364 cases of turnkey. The reason why the rate of turnkey-alternative is lower than that of price procurement auction is the lack of competition as well as the systematic difference. By setting up a model, we are able to explain the difference in rate caused by the respective reason. When we suppose there are 3 bidders in case of price procurement auction for a project that exceeds 100 billion won, the rate is expected to be around 64%. This implies that difference of 26% is caused by the systemic difference and 3% by the lack of competition. Therefore, we conclude that the difference in rate between turnkey-alternative and price procurement auction is caused mainly by the systemic difference. In case of PPP(Public Private Partnership) projects, among 154 projects in total, only 40% has more than 2 bidders that compete. The average number of bidders is 1.88 which is less than 2, and the average rate of successful bids is 90%. In sum, under the price procurement auction, there is strong competition which is reflected by the rate of successful bids. However, there is room to decrease the rate by strengthening the competition under the turnkey-alternative. Also with PPP projects, we expect the rate can be steadily reduced with revived competition among bidders.

• Journal of Acupuncture Research
• /
• v.22 no.3
• /
• pp.13-22
• /
• 2005

By extracting the sample of Ulmus davidiana Planch(Ulmaceae), which was known to have the protection of damaged organ and the anti-inflammation action, it was experimented whether it is available for the application of treatment of osteoporosis. In the previous experiment, the extracts from Ulmus davidiana Planch(Ulmaceae) were confirmed to inhibit Cathepsin K through treating the cell of long bone, which contains osteoclast. Through this, it is suggested that Ulmus davidiana Planch(Ulmaceae) can play a role of prodrug as an inhibitor of absorbing bone ash in the treatment of osteoporosis. In the present experiment, a research in vitro Ulmus davidiana Planch(Ulmaceae) on the growth and sensibilization of osteoblast in a state that induced osteosis by using the cell tissue of MC3T3-El pre-osteoblastic was conducted. As a result, it could be confirmed that Ulmus davidiana Planch(Ulmaceae) has the strengthening function by enhancing the dosage and the activity of ALP depending on the time. The dosage was observed at the minimum of $50{\mu}g/m{\ell}$ and the maximum of $150{\mu}g/m{\ell}$. The enhancement in bone morphogenetic protein-2 at $100{\mu}g/m{\ell}$ UD could be observed, and it also increased the concentration of ALP mRNA within the cell of MC3T3-El. At $60{\mu}g/m{\ell}$ UD which indicated a little increase in Type I collagen mRNA for a long time of culture. However, it was shown to sharply inhibit the expression of gene in the culture between 15-20 days. These results suggest that Ulmus davidiana Planch(Ulmaceae) has an influence upon bone metabolism through thje sensibilization of osteoblast. Therefore, it could be known that utilized Ulmus davidiana Planch(Ulmaceae) can be positively applied for the general disease of bone metabolism through future studies.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.2
• /
• pp.40-51
• /
• 2011

Recently, the public's interest in quality of life and good design has increased, and the opportunities for their participation in space planning and the design process are expanding. However, the public still lacks understanding of the role(and importance) of space and environment and is not experienced in expressing their opinion on improving the urban environment. At this point, 'Built Environment Education for Kids' will be the key to understanding space and environment as future citizens and to developing the ability of problem-solving and expressing their opinions. This study aims to change the awareness of the public as well as experts, and to make a better urban space through comparison and analysis of domestic and foreign 'Built Environment Education.' In 27 countries around the world(more than 110 institutions), 'Built Environment Education' from childhood is being implemented. Such movements aim to make people participate in the space design and decision-making process by understanding a fundamental element of the built environment and space perception. In this study, the United States, Britain, Finland, Japan and South Korea's 'Built Environment Education' are discussed Above all, the definition, range and target of 'Built Environment Education' are discussed For each case, the purpose and effect, laws and educational processes, systems and roles, and examples of programs are analyzed. Through reviewing each attribute and their implications, a conclusion is drawn on the aspects we have to consider in laying the foundation for implementing the 'Built Environment Education' in Korea, such as consideration of the locality, organizing systematic networks and composing a pool of experts, building proper institutions, and establishing the role of the government. This case study of 'Built Environment Education' can help increase the awareness of the public and build their strength in establishing a better future space. Through the analysis of the purpose, laws, systems, and contents, this case study is expected to provide and build the foundation for an educational system and develop an appropriate program that best suits our society.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.5-14
• /
• 2011

One of the new roles of modern retail stores is to supply consumers with a memorable experience. In Korea, enhancing a store's environment so that customers remember a unique shopping experience is recognized as a sound strategy for strengthening the store's competitiveness. Motivated by this incentive, awareness of the experience-store concept is starting to increase in various categories of the retail industry. However, many experience stores, except in a few cases, have yet to derive a significant profit, explaining why Korean consumers are somewhat unfamiliar with, yet fascinated by, the experience stores that now exist in the country. Consumer satisfaction directly, and indirectly, affects a company's future profit and potential financial gain; customer satisfaction also affects loyalty. Therefore, knowing the significant factors that increase satisfaction and loyalty is essential for any company, in any field, to be able to effectively differentiate itself from the competition. Intrigued by increased competition opportunities, most Korean companies have adopted experience-store marketing strategies. When establishing the most effective processes for increasing sales and achieving a sustainable competitive advantage of a new concept, companies should consider certain factors that influence consumers' ability to accept new concepts and ideas. The Technology Acceptance Model (TAM) is a theory that models how people accept new concepts. TAM proposes the following two factors that influence a person's decisions about how, and when, he or she will use a new product: "perceived usefulness" and "perceived ease of use." Much of the existing research has suggested that a person's character also affects the process for accepting new ideas. Such personal character attributes as individual preferences, self-confidence, and a person's values, traits, and/or skills affect the process for willingly consenting to try something new. It will be meaningful to establish how the TAM theory's components, as well as personal character, affect individuals accepting the experience-store concept. To that end, as it pertains to an experience store, the first goal of the study is to examine the influence of innovative factors (perceived usefulness and perceived ease of use) on satisfaction and loyalty. The second objective is to define the moderate effect of consumers' personal characteristics on the model. The proposed model was tested on 149 respondents who were engaged in leisure sports activities and bought sports outdoor garments and equipment. According to the study's findings, the satisfaction and loyalty of an experience store can be explained by perceived usefulness and perceived ease of use, with the study's results demonstrating the stronger of the two factors being "perceived ease of use." The study failed to explain the effects of a person's character on the model. In conclusion, when the companies that operate the experience stores execute their marketing and promotion strategies, they should stress the stores' "ease of use" product components. Additionally, it can be extrapolated from the study data that since the experience-store idea is still relatively unfamiliar to Korean consumers, most customers are not yet able to evaluate, nor take a position regarding, their respective attitudes toward experience stores.