• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.183-189
• /
• 2018

본 연구에서는 용사기법에 의해 콘크리트 표면에 금속피막을 형성하는 새로운 마감 의장기법의 가능성을 검토하기 위하여, 콘크리트의 함수율 변화에 따른 금속피막의 부착성능에 대하여 실험적인 연구를 수행하였다. 그 결과, 선재의 색은 용사 후에도 변하지 않는 것을 알 있었고, 콘크리트 부착강도 기준인 2.5 MPa를 확보하기 위한 하지 콘크리트의 함수율을 10% 이하로 관리하면 금속피막의 부착강도눈 확보되는 것으로 판단된다. 또한, 콘크리트와 금속피막의 부착강도를 증진시키기 위해서는 표면강화제에 의한 콘크리트 표면강화와 함께 금속피막을 봉공처리제로 봉공하는 것이 매우 유효한 것을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.341-344
• /
• 2001

Fiber reinforced shotcrete(FRS) is widely used in tunnel linings, which strengthen the rock surface and reduce the loosening of the rock strata. The advantages of FRS in tunnel linings are the unsusceptibility to crack, the benefit of shotcrete strength, and the superiority of toughness. In this study, the several evaluation methods of FRS toughness were investgated experimentally, which included the ASTM beam test, EFNARC square panel test and RTA round panel test. Especially, it was examined that the round panel test could fulfill the toughness evaluation of FRS.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.697-706
• /
• 2011

There are more than 800 railway steel plate girder bridges which are in use and the total length is approximately 50 km. Among these, it shall be pointed out that non-ballast rail systems which lay on wood sleepers are the most critical members. To strengthen this type of structures, mainly two methods have been applied. The first one is the most typical method which is to replace the girders with slab girder system or steel composite girders and to add ballast. It is not uncommon that the construction cost of substructure is more than ten time higher than that of superstructures and even in this case, the structural uncertainty for the substructures is not diminished. To resolve above mentioned problems, new method was developed to rehabilitate railway steel girder bridge by adding PC-slab using transport equipment. Using this method, substructure strengthen is rarely required because the additional weight to the bridge superstructure is only up to 1.0t/m. Also it was possible to save the construction cost by reducing construction duration and by simplifying the construction process. Experimental construction was performed for Jewon bridge and measurements were performed before and after construction to verify the bridge capacity.

• 한국치위생학회지
• /
• 제10권4호
• /
• pp.757-764
• /
• 2010

Objectives : The fluoride coating for caries prevention and strengthen enamel use NaF(sodium fluoride, Junsei Chemical Co., Ltd, Japan) 2% gel, SnF2(stannous fluoride, SIGMA-ALDRICH Gmbh, USA)8% gel and APF(acidulated phosphate fluoride, Sultan health care, USA) 1.23% gel. Methods : After put the enamel piece in these fluoride compound gel, we observed density level. And after measuring the vickers hardness, Got the following conclusions. Results : 1. After settling in the APF 1.23% during 6 days, we observed high density level of enamel surface using 250 magnification scanning microscope. The vacuum of surface packed (in) like sardines. 2. After settling in the APF 1.23% during 6 days, we observed reducing the space between the cluster of enamel surface using 50,000 magnification scanning microscope. 3. The vickers hardness change was very much on the all kinds of fluoride compound gel[2% NaF(sodium fluoride)gel, 8% SnF2(stannous fluoride) gel, 1.23% APF(acidulated phosphate fluoride)gel]. It's all because of reducing the space between the cluster of enamel surface(p<0.001). Conclusions : The vickers hardness change was very much on the all kinds of fluoride compound. It's all because of reducing the space between the cluster of enamel surface.

• 한국직업건강간호학회지
• /
• 제29권3호
• /
• pp.202-207
• /
• 2020

Purpose: COVID-19 infections have been erupting in places of worship, long-term care facilities, and call centers in Korea since January 2020. This study aims to diagnose and present an infection control system solution for long-term care facilities where at-risk elderly individuals are actively engaged in communal life. Methods: We conducted comparative analyses of infection control systems between long-term care facilities and medical institutions respective of relevant laws and this study's evaluation system. Results: To prepare for future infectious diseases, it is necessary to establish a long-term care facility infection control system and strengthen the standards thereof, to strengthen long-term care facility evaluation standards and to newly establish medical charges for infection control. Conclusion: Systematic procedure fortification and financial support provisions are necessary for infection control at long-term care facilities.

• 지식경영연구
• /
• 제9권3호
• /
• pp.59-76
• /
• 2008

Due to rapid increase in number of Internet users, the volume of domestic Internet shopping is expanding dramatically. Although the Internet shopping mall business is steadily growing, it has structural weakness, and in general, the business does not generate profit. In this context, this research identifies characteristics of the Internet shopping non-adopters, and suggests strategies to strengthen competitiveness of domestic Internet shopping malls and to create a new demand. Analysis of MCR data in 2007 showed that out of 4,298 respondents, 2,206 people adopted Internet shopping (51.3%). and 2,092 did not (48.7%). The survey measured 28 items regarding a consumption pattern and a lifestyle of the Internet users, and the analysis result showed that the pattern can be categorized in seven groups. Based on the analysis, the research suggests that the domestic Internet shopping malls adopt strategies to increase consumers' access frequency to tile Internet service, provide high-end goods, diversify transaction methods, make online shopping more convenient, cater to diversified consumer demands based on demographic data, provide price comparison more Internet shopping mails, and provide sufficient and useful information to consumers.

• 한국보건간호학회지
• /
• 제29권2호
• /
• pp.203-218
• /
• 2015

Purpose: The purpose of this study is to find and suggest ways to invigorate operation of visiting nursing centers. Methods: SWOT analysis was performed based on the status of use of visiting nursing centers and opinion survey on the centers' nursing experts. Results: SO strategy was drawn to improve service satisfaction, develop standardized manuals, and improve the areas of visiting nursing services, and WO strategy was drawn to establish reliability, strengthen promotion or marketing strategy, strengthen management ability, and reinforce the governmental support of visiting nursing services. ST strategy was drawn to recover the functionality of health management, secure competitive advantage, and simplify the issuance of visiting nursing directions, and WT strategy was drawn to provide customized service, establish the cooperative system of related agencies, and adjust fees. Conclusion: For invigoration of visiting nursing centers, people must recognize the importance of the visiting nursing service and institutional standards should be established so that visiting nursing service, which is currently provided as an option according to Standard Long-Term Care Plan, can be provided on a mandatory basis.

• 토지주택연구
• /
• 제3권1호
• /
• pp.1-14
• /
• 2012

Since the provision of Permanent Affordable Housing in the early 1990's, it is confronted with the need to strengthen its welfare service due to aging of its facilities and the declining welfare system for its tenants. In addition, the aging population of tenants is on the rise, increasing the group of tenants that are in need of care. The local social community center has entered into the community of permanent affordable housing and takes partial responsibility in the tenant's social welfare. However, social community center is mainly responsible for providing welfare service to its local residents and thus limited in its ability to satisfy welfare service to tenants of permanent affordable housing. Therefore, it is required to renew the existing welfare system to better suit social demands of tenants according to its specific social group and the characteristics of housing complex. This study aims to propose methods that can strengthen welfare service and analyze the characteristics of welfare service by investigating the existing conditions of welfare system for the tenants in permanent affordable housing complex. For this purpose, this study presents with categories of service standards, by breaking down and codifying welfare service and propose applicable mixed-use service in pre-existing permanent affordable housing.

• 대한간호학회지
• /
• 제38권6호
• /
• pp.902-913
• /
• 2008

Purpose: The purpose of this study was to identify effects of a strengthening program for the lower back in older women with chronic low back pain. Methods: The research design was a nonequivalent control group pretest-posttest experiment. The experimental group consisted of 16 older women and the control group, 14, all of whom had experienced low back pain for at least 3 months. The strengthening program for the lower back included lumbar stabilization exercises and education on pain management in daily living. For an 8 week period, exercises were done 3 days a week and on one day education was also given. Results: Pain and disability scores decreased significantly in the experimental group compared to the control group. Flexibility, life satisfaction and lumbar muscle strength scores increased significantly in the experimental group compared to the control group. Conclusion: Low back pain and disability can be relieved, and flexibility, muscle strength, and life satisfaction increased through a program to strengthen the lower back. It is suggested that a program to strengthen the lower back would be an effective nursing intervention for older women with low back pain.

• 한국산업보건학회지
• /
• 제29권2호
• /
• pp.226-235
• /
• 2019

Objectives: The purpose of this study was to investigate whether there were differences in manufacturing industry worker's health issues depending on job stress, fatigue, and health and safety services. Methods: The purpose of the questionnaire survey and its contents were explained to manufacturing industry health personnel, and the questionnaires were collected from 666 workers from 17 manufacturing workplaces. Questionnaires with missing data were excluded from the analysis so a total of 632 questionnaires were included. Results: Overall, 74.1% of the respondents had experienced health issues during the preceding month. The factors affecting worker health were number of workers(OR=1.000034, p=.013), job demand(OR=1.82, p=.009), MFS(OR=1.85, p=.003), provision of safety & health information(OR=1.85, p=.048), wearing protector(OR=2.58, p=.021). Conclusion: It is necessary to strengthen the safety and health education to mitigate hazardous and risk factors. Employers should provide health managers in charge of safety and health education to control workplace risk factors. In case of small businesses, it may be necessary to strengthen safety and health education in existing worker health centers and government support projects.