• 제목/요약/키워드: strength loss

검색결과 1,486건 처리시간 0.034초

PS강재의 단면적 감소에 따른 PSC보의 휨강도 평가 (Flexural Strength Evaluation of PSC Beam with Loss of PS Tendon Area)

  • 박순형;김용태;윤석구;김은겸
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.309-312
    • /
    • 2008
  • 본 연구는 강선 부식이 PSC보 휨강도에 미치는 영향을 알아보기 위해 실내실험을 수행하였다. 긴장력을 달리하여 길이 4m인 PSC보부재 5개를 제작하였으며, 그 중 2개의 부재는 덕트 내부에 있는 PS강재를 노출시킨 상태에서 부식촉진장치를 이용해 인위적으로 PS강재를 부식시켰다. 실험부재의 파괴시까지 정적하중을 재하하면서 철근과 콘크리트의 변형률, 중앙부의 처짐량 변화를 측정하였으며 또한 음향센서를 콘크리트 표면에 부착하여 PS강선의 파단횟수 및 파단시기 등을 계측하였다. 실험 결과, PS강재가 부식된 부재는 PS강재의 단면 감소를 고려해 계산한 휨강도 이론값보다 작은 실험값이 나왔다. 또한 휨 파괴 이전에 PS강재가 조기에 파단되는 현상이 관찰되었으며, 결과적으로 휨강도가 급격히 감소됨을 확인할 수 있었다. 부식된 PS강재를 포함하고 있는 PSC보의 휨강도 평가시 일방향 육안관찰에 의한 PS강재의 단면적을 산정하는 것은 매우 어려운 일이며, 연성거동을 위한 유효 PS강재의 단면적을 판단하는 것은 매우 복잡한 일이라 판단된다.

  • PDF

혼화재 사용 콘크리트의 응결 및 강도발현에 미치는 온도의존성에 관한 연구 (A Study on the Temperature Dependency Affecting Setting and Strength Development of Concrete Using Mineral Admixtures)

  • 주은희;손명수;전현규;한민철;한천구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
    • /
    • pp.707-710
    • /
    • 2005
  • This experimental study investigate temperature dependency affecting setting and strength development of concrete using mineral admixtures such as CKD, FA and BS. For the properties of setting at $5^{\circ}C$, setting time of concrete with mineral admixture was delayed about $3\~14$ hour compared with that of plain concrete. Use of CKD had a desirable effect on reducing setting retard under $5^{\circ}C$ because of $CaCO_3$ of CKD while use of FA and BS retarded setting time greatly. For compressive strength under $5^{\circ}C$, concrete with CKD had the most compressive strength in early age compared with the other mineral admixtures but exhibited slight strength loss in $-5^{\circ}C$ at 28days. Especially, concrete with FA and BS was observed in early stage at low curing temperature because of strength loss remarkably in $-5^{\circ}C$.

  • PDF

초기동해를 입은 콘크리트의 압축강도에 미치는 영향인자에 관한 연구 (A Study of Influencing Factors on Compressive Strength of Concrete Frozen at Early Ages)

  • 배수원;김진근;권기주;정원섭
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.527-532
    • /
    • 2003
  • When fresh concrete is exposed to sufficiently low temperature, the free water in the concrete is cooled below its freezing point and transforms into ice, which causes decrease in compressive strength of concrete. Of the many influencing factors on the loss of compressive strength, the age of concrete at the beginning of freezing, water-cement ratio, and cement-type are significantly important. The objective of this study is to examine how the these factors affect the compressive strength of concrete frozen at early ages. The results from the tests showed that as age at the beginning of freezing is delayed and water-cement ratio is low, the loss of compressive strength decreases. In addition, concrete made with high-early-strength cement is less susceptible to frost damage than concrete made with ordinary portland cement.

  • PDF

조기강도 콘크리트의 현장적용을 위한 고성능감수제의 종류에 따른 특성 연구 (Study on the Field Application According to the Early Strength of the Concrete Admixed with Polycarboxylate Superplasticizer)

  • 이진우;김경민;이영환;배연기;이재삼
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
    • /
    • pp.671-674
    • /
    • 2005
  • In this study, it is examined the properties of early strength of concrete mixed with polycarboxylate superplasticizer. For this experiment, it is analyzed that the slump and strength properties according to the mixture factors, compared with cements and superplasticizers of each company and curing temperature($15,\;20^{\circ}C$). (1) The slump loss of concrete used polycarboxylate superplasticizer(rapid strength type) showed $0.5\~1.5cm$, it is judged that slump loss according to the time lapse can be minimized. (2) The performance of polycarboxylate superplasticizer kept up consistency and accelerated strength development. it is possible to reveal 12MPa within $18\~20$hours at $20^{\circ}C$ curing, but impossible within 24hours at $15^{\circ}C$. (3) It is necessary to studies about rapid strength development in the low temperature.

  • PDF

산업부산물을 활용한 초고강도콘크리트의 제조 (Manufacture of Ultra High Strength Concrete using Industrial by-products)

  • 문한영;김병권
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제5권3호
    • /
    • pp.153-162
    • /
    • 2001
  • This paper presents the fundamental study on rational manufacture of Ultra High Strength(VHS) concrete using industrial by-products as like silica fume, slag and fly ash. In this study, we had tested various mixing cases to manufacture the UHS concrete(target compressive strength : over $1,000kgf/cm^2$) which is easily workable (target slump flow : $60{\pm}10cm$). The main variables are studied: 1) to find the optimum replacement ratio of mineral admixture. 2) to find a rational water-binder ratio and a proper binder content. 3) to find the method for reduction of slump loss. From the test results, it is concluded that the rational mix design can be made by using 40% slag, 10% silica fume. We found that compressive strength of UHS concrete increases according to decreasing W/B ratio but in W/B ratio 18~20%, the difference is vague and the compressive strength does not necessarily increase according to increasing binder content over 700kg.

  • PDF

외경 36mm 강관의 관대관 마찰용접 특성과 공정 변수 최적화 (Mechanical Property and Process Variables Optimization of Tube-to-Tube Friction Welding for Steel Pipe with 36 mm External Diameter)

  • 공유식;박영환
    • 동력기계공학회지
    • /
    • 제18권2호
    • /
    • pp.50-56
    • /
    • 2014
  • Friction welding is a very useful joining process to weld metals which have axially symmetric cross section. In this paper, for the friction welding with tube-to-tube shape, the feasibility of industry application was determined using analyzing mechanical properties of weld and optimized welding variables was suggested. In order to accomplish this object, rotating speed, friction heating pressure, and friction heating time were selected as the major process variables and the experiment was performed in three levels of each parameter. Weld characteristic was investigated in terms of weld shape and metal loss, and 7mm of metal loss was regarded as the optimal metal loss. By tensile test, tensile strength and yielding strength was measured and fracture was occurred at base metal. In order to optimize the welding condition, fitness function was defined with respect to metal loss and yielding strength and the fitness values for each welding condition could be calculated in experimental range. Consequently, we set the optimal welding condition as the point which had maximum value of fitness function. As the result of this paper the optimal welding variables could be suggested as rotating speed was 1300 rpm, friction heating pressure was 15 MPa, and friction heating time was 10 sec.

Comparative Analysis of Two Selective Bleaching Methods on Alpaca Fibers

  • Liu, Xin;Hurren, Christopher J.;Wang, Xungai
    • Fibers and Polymers
    • /
    • 제4권3호
    • /
    • pp.124-128
    • /
    • 2003
  • Dark brown Alpaca fiber was reduced in shade via selective bleaching with peroxide. Two selective oxidative bleaching methods were tested on alpaca top to assess their effectiveness for color removal and fiber quality properties. Color change, bundle strength, weight loss, fiber diameter, surface modification, dye-ability and dye wash fastness were assessed for both methods and compared with the original brown top. Bleach method 1 (BL-I) showed little surface modification, 5.8% weight loss and 2.4% strength loss. D1925 yellowness index was reduced to 74.3 from 83.1 and provided a good base for the dyeing of medium to deep shades. Bleach method 2 (BL-II) displayed considerable surface modification, 7.8% weight loss and 18% strength loss. BL-II also resulted in a mean diameter reduction of 1.9 micron during bleaching. Yellowness was reduced to 64.5 from 83.1 and provided a very good base for the dyeing of medium to deep shades. BL-I showed better exhaustion of the premetallised dye Lanaset Violet B than BL-II. Wash fastness for BL-II was 1 grey scale unit poorer than BL-I. BL-II showed far better color clarity at pale depths however the wash fastness of the finished product was not good enough to maintain the depth or clarity of the color. BL-I showed poorer clarity of color but exhibited better wash fastness results.

Influence of mineral by-products on compressive strength and microstructure of concrete at high temperature

  • Sahani, Ashok Kr.;Samanta, Amiya K.;Roy, Dilip K. Singha
    • Advances in concrete construction
    • /
    • 제7권4호
    • /
    • pp.263-275
    • /
    • 2019
  • In the present work, Granulated Blast Furnace Slag (GBFS) and Fly ash (FA) were used as partial replacement of Natural Sand (NS) and Ordinary Portland Cement (OPC) by weight. One control mix, one with GBFS, three with FA and three with GBFS-FA combined mixes were prepared. Replacements were 50% GBFS with NS and 20%, 30% and 40% FA with OPC. Preliminary investigation on development of compressive strength was carried out at 7, 28 and 90 days to ensure sustainability of waste materials in concrete matrix at room temperature. After 90days, thermo-mechanical study was performed on the specimen for a temperature regime of $200^{\circ}-1000^{\circ}C$ followed by furnace cooling. Weight loss, visual inspection along with colour change, residual compressive strength and microstructure analysis were performed to investigate the effect of replacement of GBFS and FA. Although adding waste mineral by-products enhanced the weight loss, their pozzolanicity and formation history at high temperature played a significant role in retaining higher residual compressive strength even up to $800^{\circ}C$. On detail microstructural study, it has been found that addition of FA and GBFS in concrete mix improved the density of concrete by development of extra calcium silicate gel before fire and restricts the development of micro-cracks at high temperature as well. In general, the authors are in favour of combined replacement mix in view of high volume mineral by-products utilization as fire protection.

비만 노인 여성에서 저열량식과 근력운동의 병행이 근내지방과 혈중지질에 미치는 영향 (Effects of a Hypocaloric Diet with or without Strength Training on Intermuscular Adipose Tissue Mass and Serum Lipid Concentrations in Obese Elderly Women)

  • 김재희
    • 운동영양학회지
    • /
    • 제13권1호
    • /
    • pp.9-14
    • /
    • 2009
  • The effects of a hypocaloric diet with or without strength training on body fat distribution and serum lipid concentrations in obese elderly women were investigated. Twenty-six healthy women (age 66±4.6 yr; body mass index 32.3±2.9 kg/m2) were randomly assigned to 3 groups: control (C; n=8), hypocaloric diet (DO; n=9) or hypocaloric diet with strength training (DST; n=9). Subcutaneous adipose tissue (SAT), visceral adipose tissue (VAT), and inter and intra muscular adipose tissue (IMAT) were measured using magnetic resonance imaging. Serum lipid concentrations including total cholesterol (TC), high density lipoprotein cholesterol (HDLC), low density lipoprotein cholesterol (LDLC), and triglycerides (TG) were measured. No significant changes occurred in body weight and percent body fat in the C group over the 16-week period. The DO and DST groups lost similar amounts of weight and fat after 16 weeks. SAT and VAT decreased after weight loss in the DO and DST groups but not in the C group. IMAT was significantly reduced in the DO and DST groups, whereas in the C group IMAT increased. The loss in IMAT mass was similar in the DO and DST groups. TC and LDLC decreased in the DO and DST groups but not in the C group. There were no differences between the DO and DST groups in decrease in TC and LDLC. HDLC decreased in the DO group but not in the C and DST groups. TG tended to decrease in the DST group. In conclusion, body fat distribution including SAT, VAT, and IMAT and serum lipid concentratons were modulated by weight loss resulting from the hypocaloric diet with or without strength training in obese elderly women. Strength training did not enhance the improvement in body fat distribution and serum TC and LDLC concentrations by the hypocaloric diet.

Hata Path Loss Model에서 Log-normal Distribution을 가정한 CDMA PCS 시스템의 Cell반경 산출 (The Calculation of Cell Radius for CDMA PCS System on the presumption of Log-normal Distribution with The Hata Path Loss Model)

  • 이명국;이호경
    • 한국통신학회논문지
    • /
    • 제24권9A호
    • /
    • pp.1306-1313
    • /
    • 1999
  • 본 논문은 CDMA PCS 이동통신 시스템의 망 설계를 위하여 거리에 따른 신호 감쇄 현상 분석 모델(변형된 Hata path loss model) 및 통계적 신호 강도 분포 모델(Log-Normal 분포)을 제시한다. 제시된 모델에 대구 산적동 및 수성동 지역의 측정 데이터를 적용하여 이들 지역에서 신호 강도의 세기가 임계치를 초과하는 지역의 백분율을 산출하여 망 설계의 기본 자료로 활용할 수 있도록 하였다.

  • PDF