• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1062-1073
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. In developing a TS equation, it is assumed that the radiated pressure is known and the re-radiated intensity is unknown. This research provides a TS equation for polygonal plates, which is applicable to near field acoustics. In this research, Helmholtz-Kirchhoff formula is used as the primary equation for solving the re-radiated pressure field; the primary equation contains a surface (double) integral representation. The double integral representation can be reduced to a closed form, which involves only a line (single) integral representation of the boundary of the surface area by applying Stoke's theorem. Use of such line integral representations can reduce the cost of numerical calculation. Also Kirchhoff approximation is used to solve the surface values such as pressure and particle velocity. Finally, a generalized definition of Sonar Cross Section (SCS) that is applicable to near field is suggested. The TS equation for polygonal plates in near field is developed using the three prescribed statements; the redection to line integral representation, Kirchhoff approximation and a generalized definition of SCS. The equation developed in this research is applicable to near field, and therefore, no approximations are allowed except the Kirchhoff approximation. However, examinations with various types of models for reliability show that the equation has good performance in its applications. To analyze a general shape of model, a submarine type model was selected and successfully analyzed.

• 콘크리트학회논문집
• /
• 제21권2호
• /
• pp.169-178
• /
• 2009

현행 도로교설계기준의 철근콘크리트 교각 심부구속 횡방향철근량 산정식은 중심축력을 받는 기둥에서 콘크리트 피복이 탈락된 후 콘크리트 심부만으로 저항하는 축강도가 콘크리트 피복이 탈락되기 이전의 축강도 이상이 되기 위하여 필요한 횡구속 철근비로서 콘크리트 압축강도, 횡방향철근 항복강도 및 단면적비율을 주요변수로 고려하고 있다. 이들 변수 중 피복두께에 따라 달라지는 전체단면적과 심부단면적의 단면적비율은 압축파괴 영역에서의 강도발현 측면을 고려한 변수이므로 교각과 같이 작용축력이 상대적으로 낮아 축력보다는 모멘트에 의해서 지배되는 인장파괴 영역의 연성거동 측면에서는 단면적비율이 미치는 영향은 크지 않다. 그러나 설계기준의 횡방향철근량 산정식 자체가 교각의 내진거동에 중요한 요소인 연성능력을 직접적으로 고려한 식이 아니기 때문에 단면크기가 상대적으로 작은 경우 또는 내구성 등의 확보 차원에서 콘크리트 피복두께가 증가하여 단면적비율이 과도하게 커지는 경우에는 교각의 시공성 및 경제성이 저하될 정도로 많은 횡방향철근량이 요구되는 문제점을 야기한다. 따라서 본 논문에서는 콘크리트 피복두께가 심부구속 횡방향철근량 산정식에 미치는 영향을 비교, 분석하고 보다 합리적인 내진설계를 위한 심부구속 횡방향철근량 산정식을 수정 제안하였으며 국내 외에서 수행된 실험 결과를 바탕으로 제안식의 안전율 및 타당성을 검증하였다.

• 대한기계학회논문집A
• /
• 제21권9호
• /
• pp.1498-1506
• /
• 1997

Procedures are presented for influence of shot peening on fatigue strength, fatigue life and effects of shot peening are discussed from experiments were taken between shot peened and unpeened SPS5, SM45C specimens. After the residual stress on shot peened specimens was measured by X-ray diffractometer, rotating bending fatigue tests were carried out. In addition, the compressive residual stress profile was obtained by the superposition method of three stresses which is based on Al-Obaid's equation. Predicted fatigue life considering residual stress profile which was obtained by the Al-Obaid's equation and another predicted fatigue life considering residual stress profile which was measured in test were compared. For the purpose of predicting fatigue life, Morrow's equation considering the residual stress and mean stress was used.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.997-1002
• /
• 2002

Traditional prediction models have been developed with a fixed equation form based on the limited number of data and parameters. If new data is quite different from original data, then the model should update not only its coefficients but also its equation form. However, artificial neural network (ANN) does not need a specific equation form. Instead of that, it needs enough input-output data. Also, it can continuously re-train the new data, so that it can conveniently adapt to new data. Therefore, the purpose of this paper is to develop the I-PreConS (Intelligent system for PREdiction of CONcrete Strength using ANN) that provides in-place strength information of the concrete to facilitate concrete form removal and scheduling for construction.

• 한국강구조학회 논문집
• /
• 제19권6호
• /
• pp.575-585
• /
• 2007

본 논문은 55 MPa 이하 강도의 콘크리트를 사용한 CFT 기둥에 대한 P-M 상관곡선을 제안한 선행연구의 후속연구로서, 2005 AISC에서 새롭게 포함된 55 MPa 이상의 고강도 콘크리트를 사용한 정방형 CFT 기둥의 P-M 설계식을 제안하였다. 선행연구에서 제안한 개념을 적용하여 고강도 콘크리트를 사용한 CFT에서의 최대모멘트와 최대모멘트시의 압축력을 구하기 위해 강관의 폭두께비(b/t)와 강관의 항복강도에 대한 콘크리트의 상대강도(fck/Fy)를 중요 변수로 총 36개의 대상단면을 선정하여 Fiber Analysis를 통한 변수해석을 수행하였다. 강관의 응력-변형율 관계는 완전탄소성으로 가정하였고 콘크리트는 고강도 콘크리트에 적용가능한 Sakino의 모델을 이용하였다. 변수해석으로부터 얻어진 결과로부터 상기의 두 변수를 이용하여 고강도 콘크리트를 사용한 각형 CFT 기둥의 설계에 쉽게 사용할 수 있는 설계식을 제안하였다. 기존의 실험결과와 비교한 결과 본 논문에서 제시하는 방법은, 2005 AISC에서 제시하는 방법에 비해 보다 더 쉽고 간단하게 사용될 수 있는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.591-596
• /
• 2001

Nine steel fiber reinforced high strength concrete beams and three steel fiber reinforced normal strength concrete beams without stirrups were tested by two point load. The variables studied in this investigation are the shear span/depth ratios of a/d = 2, 3 and 4, steel fiber volume fractions of V$_{f}$ : 0, 0.5% and 0.75% and concrete compressive strengths of f$_{ck}$: 630kgf/$cm^{2}$, and 310kgf/$cm^{2}$. Based on these tests and on tests by previous investigators, predictive equation is proposed for evaluating the ultimate shear strength of steel fiber reinforced concrete beams without stirrups. The proposed equation gave good prediction for the ultimate shear strength of the tested beams.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.619-622
• /
• 2005

This study concerns the new strength equation of concrete by ultrasonic pulse velocity test. There are not only few estimate strength equations of concrete by ultrasonic pulse velocity test, but also many problems to apply them because of time,. cost, easiness, structural damage, reliability and so on. For this study, there performed a series of test and proposed equations as follows; Linear: ${\Large f}_{ck}=-193.15+60.97Vp\;r^2=77.9\%$ Quadratic : ${\Large f}_{ck}=276.85-189.64Vp+33.22Vp^2\;r^2=80.3\%$ here, $f_{ck}$ : Estimated compressive strength of concrete by MPa Vp : Ultrasonic Pulse Velocity of concrete by km/sec

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.57-58
• /
• 2010

본 연구는 SHCC 벽판의 전단강도 평가식을 제안하기 위하여 SHCC 재료의 직접인장강도($f_t$)와 섬유보강지표(FR index, $F_i$)를 전단강도식에 적용하였으며, 제안식은 SHCC의 전단강도를 예측하는 데 에 적절한 것으로 평가되었다.

• 한국재난관리표준학회지
• /
• 제2권4호
• /
• pp.59-65
• /
• 2009

현재 대부분 사용되고 있는 반발경도법을 이용한 강도 추정식을 서울의 대표적인 지하구조물에 적용할 경우 준공년도에 따른 재령계수의 적용이 부적합한 것으로 판단됨에 따라 본 연구에서는 최근 8년간 수행된 서울지하철 정밀안전진단결과를 이용하여 코어의 일축압축강도와 동일위치에서 실시된 반발경도 시험결과와의 상관관계에 준공년도를 고려하여 공용중인 박스 및 터널구조물에 대한 합리적인 강도평가 추정식을 제시하였다.

• 한국농공학회지
• /
• 제43권4호
• /
• pp.97-105
• /
• 2001

The ultrasonic pulse velocity test has a strong potential to be developed into a very useful and relatively inexpensive in-place test for assuring the quality of concrete placed in structure. The main problem in realizing this potential is that the relationship between compressive strength ad ultrasonic pulse velocity is uncertain and concrete is an inherently variable material. The objective of this study is to improve the reliability of in-place concrete strength predictions by ultrasonic pulse velocity method. Experimental cement content, s/a rate, and curing condition of concrete. Accuracy of the prediction expressed in empirical formula are examined by multiple regression analysis and linear regression analysis and practical equation for estimation the concrete strength are proposed. Multiple regression model uses water-cement ratio cement content s/a rate, and pulse velocity as dependent variables and the compressive strength as an independent variable. Also linear regression model is used to only pulse velocity as dependent variables. Comparing the results of the analysis the proposed equation expressed highest reliability than other previous proposed equations.