• Journal of the Society of Disaster Information
• /
• v.11 no.2
• /
• pp.235-243
• /
• 2015

The methods to improve the protection and explosion-proof performance of concrete structures include the backside reinforcement or concrete material property improvement and the addition of structural members or supports to increase the resistance performance, but they are inefficient in terms of economics and structural characteristics. This study is about the basic study on the fiber composite panel cover, and the nano-composite material and adhesive as the filler, to maximize the specific performance of each layer and the protection and explosion-proof performance as the composite panel component by improving the tensile strength, light weight, adhesion and fire-proof performances. The fiber composite panel cover (aramid-polyester ratios of 6:4 and 6.5:3.5) had a 2,348 MPa maximum tensile strength and a 1.8% maximum elongation. The filler that contained the nano-composite material and adhesive had a 4 MPa maximum tensile shear adhesive strength. In addition, the nano-composite filler was 30% lighter than the normal portland cement

• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.455-464
• /
• 2017

Static loading test was performed on a composite girder with an I-shaped steel girder and SUPER concrete on the top of the steel in order to evaluate flexural behavior characteristics. Total length of the test specimen was 25m long and the depth was 786mm including compressive concrete section('casing' hereafter) with 80MPa strength. 4-point loading on simply-supported beam was applied up to 2,010kN. Results showed that yield strength at tensile steel was 2.7 times greater than service load and the ratio of ductility was 1.481. No cracks were found on the casing surface and the relative slip between different sections was insignificant.

• Journal of Coastal Disaster Prevention
• /
• v.4 no.3
• /
• pp.111-118
• /
• 2017

In this study, pull box members were designed by finite element analysis of a steel plate covering a pull box to secure its safety on the landing pier dedicated to the large research survey ship. It was assumed that the maximum load is due to the 250 tonf class crane used for unloading work when the working environment in the upper part of the landing pier was considered. The safety of the pull box was evaluated by the comparison between the yield strength of the steel plate and the result of stress analysis on the steel plate due to the crane load. It was found that the stress at the plate from the crane load exceeded the yield strength of the steel(205MPa) when the upper part of the pull box was protected by a $1950{\times}1950mm$ steel plate cover. In order to compensate for this, a concrete filled steel tube(CFT) column with a diameter of 150 mm and a steel thickness of 10 mm was reinforced at the center of the plate, and the finite element analysis was carried out. However, the maximum stress at the steel plate was higher than the yield strength of the steel in some load cases so that it was tried to find appropriate thickness of the steel plate and diameter of the CFT columns. Finally, the analysis results showed that the safety of the pull box was secured when the thickness of the steel plate and the diameter of the CFT column were increased to 30mm and 180mm, respectively.

• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.49-58
• /
• 2018

Open-mode cracks could be commonly observed in layered rocks. A concept model is firstly used to explore the mechanism of the vertical cracks (VCs) in the top layer. Then the crack behaviour of the two-layer model is simulated based on a cohesive zone model (CZM) for layer interfaces and a plastic-damage model for rocks. The model indicates that the tensile stress normal to the VCs changes to compression if the crack spacing to layer thickness ratio is lower than a threshold. The results indicate that there is a threshold for interfacial shear strength that controls the crack patterns of the layered system. If the shear strength is lower than the threshold, the top layer is meshed by the VCs and interfacial cracks (ICs). When the shear strength is higher than the threshold, the top layer is meshed by the VCs and parallel cracks (PCs). If the shear strength is comparative to the threshold, a combining pattern of VCs, PCs and ICs for the top layer can be formed. The evolutions of stress distribution in the crack-bound block indicate that the ICs and PCs can reduce the load transferred for the substrate layer, and thus leads to a crack saturation state.

• Journal of the Society of Disaster Information
• /
• v.5 no.2
• /
• pp.24-37
• /
• 2009

In the political and economic circles of our society, the security and secretary is always accompanying the society leaders, like shadows. The job of the security and secretary is a very difficult one that requires comprehensive and extensive capability and talent. From results of the prior studies, qualities of the security and secretary are divided into three groups. i.e. personal qualities, mental qualities and physical qualities. Each quality can be summarized as follows. Firstly, personal qualities mean honesty, responsibility, initiative, work ethic, sense of duty, modest attitude, kindness and loyalty. Secondly, mental qualities represent agility & composure, judgement, adaptability, memory, prediction, accuracy & reliability, observation and secret. Finally, physical qualities such as health, cleanliness, decent appearance, good feeling voice, physical strength and Martial arts for Protection. The security and secretary equipped with the above three requisites can be said to be the most ideal the security and secretary whom this age want and need.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.89-93
• /
• 2011

본 연구는 고강도콘크리트의 폭렬성상과 공극구조와의 관계를 실험적으로 규명하는 것을 목적으로 하였다. 실험변수는 양생방법, 압축강도, 공극구조로 설정하였으며, ISO834 화재온도이력곡선을 15분 적용하여 콘크리트의 초기 폭렬특성을 실험적으로 검토하였다. 그 결과 50 MPa급 이상의 고강도 콘크리트 시험체의 경우, 가열 이후에도 $0.05{\mu}m$ 이하의 공극이 많이 존재하고 있는 것을 알 수 있었으며, 가열을 받은 고강도 콘크리트는 고강도화될수록 공극이 세공화 되어 탈수 현상이 지연되는 것을 도출 할 수 있었다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2016.11a
• /
• pp.319-321
• /
• 2016

본 논문에서는 지반함몰이 발생한 현장에 긴급복구를 위한 팽창기능제의 개발에 대한 내용이다. 현재 유동화토에 대한 기준이 없어 공동에 채워지는 채움재와 비슷한 압축강도인 0.3MPa을 기준으로 하여 흙의 일축압축시험 방법을 이용하여 실험을 진행하였다. 팽창기능제의 최적배합 실험과 팽창률에 따른 압축강도를 측정하여 뒤채움재로써의 기능 특성을 평가하였다. 실험결과, 팽창기능제 A의 경우 팽창률 750%이하에서 팽창기능제 B의 경우는 모든 실험체에서 목표 강도를 만족하였다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2016.11a
• /
• pp.349-352
• /
• 2016

기존의 가열식 일반아스팔트 공법은 동결 등에 원인으로 포장재의 수명이 짧아져 잦은 유지보수가 필요한 문제점을 갖고 있으며, 이로 인해 내구성이 뛰어난 포장공법의 필요성이 대두되고 있다. 불투수성 방수아스팔트는 이러한 문제를 해결하기 위한 방안의 하나로 아스팔트 혼합물이 골재와 골재 사이를 강력하게 부착하며, 골재간의 공간을 메우고, 골재표면을 두껍게 코팅하여 골재 상호간의 강한 접착을 유지시켜주는 열가소성 폴리머를 사용한 포장공법이다. 본 연구는 불투수성 방수아스팔트 혼합물 개발을 위한 연구의 일환으로 석회석함유량, 유제함유량, 다짐강도, 실험온도 차이에 따른 불투수성 방수아스팔트 혼합물의 압축강도 특성을 실험을 통해 비교 검토하였다. 결과 분석을 통해 각각의 변수에 따른 압축강도 특성을 파악하였으며, 불투수성 방수아스팔트 혼합물 배합설계에 기초자료로 활용하고자 한다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.243-244
• /
• 2017

아스팔트 포장체의 안정적인 품질확보를 위해서는 아스팔트 바인더 자체가 부착력과 탄성력 확보는 물론 저온에서도 충분한 변형능력이 확보되어야 한다. 본 연구는 저온에서의 아스팔트 바인더의 성능개선을 목적으로 기존에 상용화되고 있는 아스팔트 바인더와 고분자계 GMA 수지(SIS, Styrene Isoprene Styrene)를 기반으로 제조된 바인더의 성능을 비교하기 위해 변형강도시험(Kim Test)을 실시하였다. 시험결과, 동절기 취성적인 파괴로 손상을 입은 도로의 보수에 있어서 SIS가 첨가된 아스팔트 혼합물은 충분한 보수효과가 기대될 것으로 판단된다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.132-133
• /
• 2015

이 논문은 세라믹 비드를 일반 모르타르의 잔골재로 대체하여 사용했을 경우 모르타르의 압축강도에 변화를 확인하고자 수행하였다. 잔골재를 대체할 세라믹 비드의 입도분포를 확인하였고, 세라믹 비드의 잔골재 대체율을 10%, 20%, 30%로 설정하고 2가지 종류의 세라믹 비드를 이용하여 시험체를 제작하여 7일, 14일 28일의 압축강도를 측정하였다.