• PNF and Movement
• /
• v.19 no.1
• /
• pp.105-113
• /
• 2021

Purpose: The purpose of this study was to investigate the effect of trunk-stabilization training using stabilizing reversal and rhythmic stabilization techniques of PNF on trunk muscle strength and respiratory function in elderly stroke patients. Methods: There were 26 stroke patients included in the study. Patients were divided into two groups, and all patients performed exercise 30 min five times per week for six weeks. The experimental group performed trunk stability exercise using stabilizing reversal and rhythmic stabilization techniques of PNF, and the control group performed flexibility and strength training. Trunk muscle strength, forced vital capacity, maximum inspiratory pressure, and maximum expiration pressure were measured to determine the changes after the intervention. For statistical processing, a paired t-test was performed within the group, and the value after intervention was performed as an independent t-test to find out the difference between the two groups. Results: In the experimental group, all of the trunk muscle strength, forced vital capacity, maximum inspiratory pressure, and maximum expiration pressure showed significant differences according to the intervention. In the control group, there were statistically significant differences in trunk muscle strength and forced vital capacity, but the maximum inspiratory pressure and the maximum expiration pressure did not show any statistical change. Conclusion: From these results, it can be seen that the trunk stability exercises that use the proprioceptive neuromuscular promotion method of stable reversal and rhythm stabilization can be a good intervention for the respiratory function of stroke patients.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.2
• /
• pp.9-21
• /
• 2021

PURPOSE: This study examined the effects of an eight weeks twenty meters walk on the cardiorespiratory fitness and strength of the shoulder extensor, hip extensor, and dorsiflexor of stroke survivor outpatients in two tertiary hospitals in Osogbo, Nigeria. METHODS: A purposive sampling technique was used to select 21 registered right or left outpatient hemiplegic stroke survivors in a pre- and post-test experimental research design. The research questions were presented using the descriptive statistics of frequency, percentage, mean, and standard deviation. The differences between the mean of the cardio-respiratory indices and the muscle strength were tested by repeated measures analysis of variance followed by Bonferroni post-hoc test for multiple comparisons. RESULTS: No significant differences in heart rate were observed at week 0 compared to week 4. A significant decrease was recorded in the parameter at week 8, compared to week 4. Moreover, there were significant decreases in blood pressure and respiratory rate in week 0, compared to week 4, and in the respiratory rate, compared to week 8. In contrast, significant elevations in VO2 max were observed in week 0, compared to week 4, and in the week 4, compared to week 8. Furthermore, significant elevations in muscular strength were documented when comparisons were made at weeks 0, 4, and 8. CONCLUSION: Eight weeks of twenty meters walk aerobic exercise improve the cardio-respiratory fitness and muscular strength of stroke survivor outpatients.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.2
• /
• pp.55-61
• /
• 2015

Purpose: The purpose of this study was to investigate the effect of regularly strength exercise of spine in teenagers with tutor. Method: Study subjects were 24 middle school students. They were arranged to 2 groups(n=12, respectively). Then experimental group did regularly strength exercise of spine as the handout maneuver during 50min/day and 1day/week in 8 weeks with tutor, but control group did regularly exercise of spine as same maneuver without tutor. For muscle strength of both extensor and flexor of lumbar, the balancing ability and weight distribution index were measured before and after the intervention. Results: For muscle strength of both extensor and flexor of lumbar, there was not significant differences after the intervention, but both flexor and extensor increase mean value of muscle strength than control group. For balancing ability and weight distribution index, there were not significant difference after intervention(p>.05), but experimental group show a tendency to decrease in a few position than control group. Conclusion: When teenagers regularly exercise for spine strengthening for a long time with tutor, it may be increased muscle strength of lumbar and trunk balance.

• The Journal of Korean Physical Therapy
• /
• v.23 no.2
• /
• pp.23-29
• /
• 2011

Purpose: The purpose of this study was to determine whether there is a relationship between strength balance and joint position sense related to the ankle joint in healthy women. Methods: Twenty-six healthy women were recruited. Isokinetic strength and joint position sense (JPS) were measured using a Biodex System 4 pro Dynamometer and a Biodex Advantage Software Package. Prior to measuring the JPS and isokinetic strength, the dominant foot was determined according to the Waterloo Footedness Questionnaire. After the JPS test, isokinetic strength was evaluated in velocity $60^{\circ}s$, including practice trial ($90^{\circ}s$). Using the measured isokinetic strength, a Strength Balance Index (SBI) was calculated. Results: Relative to the SBI, the degree of imbalance was varied; but there were imbalances. For each starting position, JPS error showed no significant differences (p>0.05). The relationship between SBI and JPS was found during the inversion to eversion process, eversion to inversion, and dorsi flexion to plantar flexion. Conclusion: There are moderate to mild relationships between JPS and SBI during ankle movement. It is suggested that to prevent ankle injuries, strength balance should be considered along with the other potential factors including anatomical alignment, proprioception, and soft tissues problems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.200-213
• /
• 2000

Lasers have given dentistry a new rapid, economic, and accurate technique for metal joining. Although laser welding has been recommended as an accurate technique, there are some limitations with this technique. For example, the two joining surfaces must have a tight-fitting contact, which may be difficult to achieve in some situations. The tensile samples used for this study were made from a custom-made pure titanium and type III gold alloy plates. 27 of 33 specimens were sectioned perpendicular to their long axis with a carborundum disk and water coolant. Six specimens remained and served as the control group. A group of 6 specimens was posed as butt joints in custom parallel positioning device with a feeler gauge at each of three gaps : 0.00, 0.25. and 0.50mm. All specimens were then machined to produce a uniform cross-sectional dimension, none of the specimens was subjected to any subsequent form of heat treatment. Scanning electron microscopy was performed on representative tested specimens at fractured surfaces in both the parent metal and the weld. Vickers hardness was measured at the center of the welds with a micropenetrometer using a force of 300gm for 15 seconds. Measurement was made at approximately $200{\mu}m\;and\;500{\mu}m$ deep from each surface. One-way analysis of variance (ANOVA) and Scheffe's test was calculated to detect differences between groups. The purpose of this study is to compare the strength and properties of the joint achieved at various butt Joint gaps by the laser welding of type III gold alloy and pure titanium tensile specimens in an argon atmosphere. The results of this study were as follows : 1. When indexing and welding pure titanium, there was no decrease in ultimate tensile strength as compared with the unsectioned alloys for indexing gaps of 0.00 to 0.50mm, although with increasing gap size may come increased distortion (p>0.05). 2. When indexing and welding type III gold alloy, there were significant differences in ultimate tensile strength among groups with weld gaps of 0.00mm, 0.25 and 0.50mm, and the control group. Group with butt contact without weld gap demonstrated a significant higher ultimate tensile strength than groups with weld gaps of 0.25 and 0.50mm (p<0.05). 3. When indexing and welding the different metal combination of type III gold alloy and pure titanium, there were significant differences in ultimate tensile strength between groups with weld gaps of 0.00, 0.25, and 0.50mm. However, the mechanical properties of the welded joint would become too brittle to be acceptable clinically (p<0.05). 4. The presence of large pores in the laser welded joint appears to be the most important factor in controlling the tensile strength of the weld in both pure titanium and type III gold alloy.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.577-577
• /
• 2001

The lastest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not blown dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during preparation of a restoration. The aim of this study was to evaluate the effect of contamination by hem-ostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were cleaned from soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive paper on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1 : Dentin surface was not etched and not contaminated by hemostatic agents. Group2 : Dentin surface was not etched but was contaminated by Astringedent (Ultradent product Inc., Utah, U.S.A.). Group3 : Dentin surface was not etched but was contaminated by Bosmin (Jeil Phann, Korea.). Group4 : Dentin surface was not etched but was contaminated by Epri-dent (Epr Industries, NJ, U.S.A.). Group5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6 : Dentin surface was etched and contaminated by Astringedent. Group7 : Dentin surface was etched and contaminated by Bosmin. Group8 : Dentin surface was etched and contaminated by Epri-dent. Group9 : Dentin surface was contaminated by Astringedent. The contaminated surface was rinsed by water and dried by compressed air. Group10 : Dentin surface was contaminated by Bosmin. The contaminated surface was rinsed by water aud dried by compresfed air. Group 11 : Dentin surface was contaminated by Epri-dent. The contaminated surface was rinsed by water and dried by compresfed air. After surface conditioning, F2000 was applicated on the conditoned dentin surface. The teeth were thermocycled in distilled water at $5^{\circ}C\;and\;55^{\circ}C$ for 1000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the lmife-edge shearing rod of the Universal testing machine(Zwick 020, Germany) running at a cross head speed of 1.0mmimin. There were no significant differences in shear bond strength between groups 1 and group 3 and 4, but group 2 showed significant decrease in shear bond strength compared with group 1. There were no significant differences in shear bond strength between group 5 and group 7 and 8, but group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.1
• /
• pp.47-60
• /
• 2016

The objective of this study was to evaluate the capability of different strength-maturity models to account for the effect of the hydration heat on the in-place strength development of high-strength concrete specifically developed for nuclear facility structures under various ambient curing temperatures. To simulate the primary containment-vessel of a nuclear reactor, three 1200-mm-thick wall specimens were prepared and stored under isothermal conditions of approximately $5^{\circ}C$ (cold temperature), $20^{\circ}C$ (reference temperature), and $35^{\circ}C$ (hot temperature). The in situ compressive strengths of the mock-up walls were measured using cores drilled from the walls and compared with strengths estimated from various strength-maturity models considering the internal temperature rise owing to the hydration heat. The test results showed the initial apparent activation energies at the hardening phase were approximately 2 times higher than the apparent activation energies until the final setting. The differences between core strengths and field-cured cylinder strengths became more notable at early ages and with the decrease in the ambient curing temperature. The strength-maturity model proposed by Yang provides better reliability in estimating in situ strength of concrete than that of Kim et al. and Pinto and Schindler.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.1
• /
• pp.91-98
• /
• 2013

PURPOSE: The purpose of this study was to investigate characteristics of the effects of a video strength exercise on grip strength, balance, timed up and go in the frail elderly women. METHODS: Subjects were thirty frail elderly people selected by the screening tool and they were divided into exercise group and control group. The video strength exercise was carried out for three time a week for 12 weeks. Data was analyzed with independent t-test between exercise and control group and paired t-test between before and after. RESULTS: There were not significant differences between exercise and control group. However, there were significant effects between before and after in exercise group. The grip strength and one-leg stand with eyes open were significant improved and timed up and go was significant decreases. CONCLUSION: These results indicate that the video strength exercise for the frail elderly was very effective on improving grip strength and one-leg stand and timed up and go.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.363-369
• /
• 2012

Shear tests parallel to the grain were conducted on domestic wood samples with different growth ring orientations. Shear strength was dependent on the angles between the direction of growth ring orientation and the applied force. The maximum shear strength showed at the intermediate growth ring orientations. Results of shear tests were also used to modify the formula which had previously been developed to predict the withdrawal strength of screw on the face of lumber. Predicted equations were fitted to the results of previous study with different length of No. 8 screw. Predicted equation was under-predicted the withdrawal strength of 25 and 30 mm length of screw within 8% and over-predicted withdrawal strength of 18 and 38 mm length of screw. A little differences between the predicted by shear strength with different growth ring orientation and observed values was existed.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.2
• /
• pp.45-51
• /
• 2023

Objective: The aim of this study was to examine the effect of strength training targeting medial quadriceps/hamstrings and non-targeting strength training on dynamic balance. Method: A total of 51 healthy subjects were randomly assigned to control, targeting strength training, or non-targeting training groups. To measure the dynamic balance, the star excursion balance test (SEBT) was performed before and after training. The SEBT parameters were compared using repeated measures ANOVA, and post-hoc paired t test at a significance level of 0.05. Results: Greater anterior (p= .011), anteromedial (p= .001), medial (p< .001), lateral (p< .001), and anterolateral (p= .001) reach distances were found between pre- and post-training in the strength training targeting medial thigh muscles group. Only greater lateral reach distance was found after non-targeting strength training (p= .029). In addition, no differences were found for any SEBT scores in the control group. Conclusion: Strength training targeting medial quadriceps and hamstrings can improve the dynamic balance, thereby it positively affected in lower extremity injury risk, whereas non-targeting strength training rarely changes the dynamic balance.