• 한국강구조학회 논문집
• /
• 제20권3호
• /
• pp.377-387
• /
• 2008

트러스 구조는 단면의 효율이 높고, 단순하면서도 합리적인 형태로 사용될 수 있어 입체적인 대공간 구조의 지붕구조에 자주 사용되는 구조이지만, 구조물을 구성하는 부재의 수가 방대하며 세장하게 된다. 또한 구조물 전체의 거동은 개부재의 좌굴에 지배되는 경우가 대부분이므로 트러스 구조를 해석할 경우에는 개부재의 탄소성 좌굴거동 및 좌굴 후 거동을 고려하는 것이 필수적이다. 반복 축 하중을 받는 트러스 부재의 좌굴 후 거동을 해석하기 위해서는 일반적으로 보 요소를 이용한 요소분할 모델 및 소성힌지 모델이 사용되지만, 전체 구조물을 해석할 경우 계산 부하 및 불안정성이 증가하므로 유용한 방법이라고 할 수 없다. 본 연구에서는 트러스 부재의 탄소성 좌굴거동을 표현할 수 있는 해석기법의 개발을 목적으로, 열역학을 사용한 정식화를 통해 1개의 요소로 부재 전체의 거동을 표현 가능한 수치해석 기법을 유도한다. 제안모델은 부재의 요소 분할을 필요로 하지 않으므로 계산상의 효율성이 높은 모델이며 부재 중앙의 회전변위를 부재내력의 손상정도로 판단하여 좌굴 후 거동을 표현하는 데미지 모델 및 세장비가 작은 경우에 유용한 근사해석법 등을 제안한다. 또한 2종류의 제안모델 해석결과와 유한요소법의 분할모델 해석결과를 비교하여, 제안모델의 신뢰성을 검토하였다.

• Structural Engineering and Mechanics
• /
• 제75권1호
• /
• pp.49-57
• /
• 2020

This paper presents a full-scale experimental test to investigate the flexural behavior of an innovative dovetail ultra-high performance concrete (UHPC) joint designed for the 5^th Nanjing Yangtze River Bridge. The test specimen had a dimension of 3600 × 1600 × 170 mm, in accordance with the real bridge. The failure mode, crack pattern and structural response were presented. The ductility and stiffness degradation of the tested specimens were explicitly discussed. Test results indicated that different from conventional reinforced concrete slabs, well-distributed cracks with small spacing were observed for UHPC joint slabs at failure. The average nominal flexural cracking strength of the test specimens was 7.7 MPa, signifying good crack resistance of the proposed dovetail UHPC joint. It is recommended that high grade reinforcement be cooperatively used to take full advantage of the superior mechanical property of UHPC. A new ductility index, expressed by dividing the ultimate deflection by flexural cracking deflection, was introduced to evaluate the post-cracking ductility capacity. Finally, a strut-and-tie (STM) model was developed to predict the ultimate strength of the proposed UHPC joint.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.413-418
• /
• 2001

Fundamental failure mode in a laminated composite pinned-joint is proposed to assess damage resulting from stress concentration in the plate. The joint area is a region with stress concentrations thus a complicated stress state exists. The modeling of damage in a laminated composite pinned-joint presents many difficulties because of the complexity of the failure process. In order to model progressive from initial to final, finite element methods are used rather than closed form stress analyses. Failure analysis must be a logical combination of suitable failure criteria and appropriate material properties degradation rules. In this study, the material properties which were obtained in previous study, the preparing process of the bearing strength test for a pinned joint CFRP composite plate subjected to in-plane loading at low temperature, and the FEM result of progressive damage model using ANSYS program are summarized to assess the structural safety of CFRP plate used in the magnetic supporting post of KSTAR(Korea Superconducting Tokamak Advanced Research).

• 대한한의학방제학회지
• /
• 제30권4호
• /
• pp.269-280
• /
• 2022

Objectives : In this study, it was investigated the effects of solid-phase fermentation extraction with Phellinus linteus of discarded Schisandra chinensis extract (PS) and its action mechanism on dexamethasone-induced muscle atrophy in mice. Methods : In mice, muscle atrophy model was induced by dexamethasone (5 mg/kg, I.p) once daily for 2 weeks and with PS extract administration (100 and 300 mg/kg, p.o.) as treatment groups. The changes in body weights, grip strength, Treadmill test, muscle weights, and the expression of atrophy-related genes were measured in muscle atrophy mice. The histological changes of gastrocnemius tissues were also observed by H&E staining with measurement of myofiber size. Results : The administration of PS extract increased significantly body weights, grip strength, treadmill test and muscle weights in muscle atrophy mice. PS extract administration increased significantly the area of myofibers and inhibited structural damages of muscle and increased significantly the expression of myogenin and decreased significantly the expression of MuRF1, Atrogin1 and phosphorylation of AMPK and PGC1α in muscle tissues of muscle atrophy mice. Conclusions : These results indicate that PS extract has a improvement effects on muscle atrophy with stimulation of myogenic differentiation and inhibition of mRNA degradation that could be related with the activation of AMPK and PGC1α signaling pathways in muscle. This suggests that PS extract can apply to treat muscle atrophy in clinics.

• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.723-738
• /
• 2017

Rock is a heterogeneous material, which introduces complexity in the analysis of rock slopes, since both the existing discontinuities within the rock mass and the intact rock contribute to the degradation of strength. Rock failure is often catastrophic due to the brittle nature of the material, involving the sliding along structural planes and the fracturing of rock bridge. This paper proposes an advanced discretization method of rock mass based on block theory. An in-house software, GeoSMA-3D, has been developed to generate the discrete fracture network (DFN) model, considering both measured and artificial joints. Measured joints are obtained from the photogrammetry analysis on the excavation face. Statistical tools then facilitate to derive artificial joints within the rock mass. Key blocks are searched to provide guidance on potential reinforcement measures. The discretized blocky system is subsequently implemented into a discontinuous deformation analysis (DDA) code. Strength reduction technique is employed to analyze the stability of the slope, where the factor of safety can be obtained once excessive deformation of slope profile is observed. The combined analysis approach also provides the failure mode, which can be used to guide the choice of strengthening strategy if needed. Finally, an illustrated example is presented for the analysis of a rock slope of 20 m height inclined at $60^{\circ}$ using combined GeoSMA-3D and DDA calculation.

• Structural Engineering and Mechanics
• /
• 제85권2호
• /
• pp.275-287
• /
• 2023

The use of environmental-friendly building materials is becoming increasingly popular worldwide. Compared to the normal concrete, rubber-based concrete is considered more durable, environmentally friendly, socially and economically viable. In this investigation, M20 grade concrete was designed and the fine aggregates were replaced with crumb rubber of two different micron sizes (0.221 mm and 0.350 mm). Fly ash (FA) and silica fume (SF) replaces the binder as supplementary cementitious materials at a rate of 0, 5, 10, 15, and 20% by weight. The mechanical properties of concrete including compressive strength, tensile, and flexural strength were determined. The polynomial work expectation validates the response surface approach (RSM) concept for optimizing SF and FA substitution. The maximum compressive strength (22.53 MPa) can be observed for the concrete containing 10% crumb rubber, 15% fly ash and 15% silica fume. The reduced unit weight of the rubberized concrete may be attributed to the lower specific gravity of the rubber particles. Two-way ANOVA with a significance criterion of less than 0.001 has been utilized with modest residual error from the lack of fit and the pure error. The predictive model accurately forecasts the variable-response relationship. Since, the crumb rubber is obtained from wasted tires incorporating FA and SF as a cementitious ingredient, it helps to significantly improve mechanical properties of concrete and reduce environmental degradation.

• 한국전산구조공학회논문집
• /
• 제24권6호
• /
• pp.617-627
• /
• 2011

본 논문은 기 수행된 1:5축소 10층 RC 공동주택의 지진모의 실험결과에 비추어 근래 개발된 PERFORM-3D를 이용하여 해석적 모사를 시도하였다. 해석과 실험의 상관관계 분석에 의해 다음과 같은 결론을 얻었다. (1) 재현주기 50년 지진에 대해 실험과 해석이 매우 유사한 탄성거동을 보였다. 반면 우리나라의 설계지진과 최대지진에 대해서는 비선형 거동을 보이긴 하지만 실험의 최대응답과 강성 및 강도 저하를 제대로 모사하지 못하였다. 이의 주된 이유는 슬라브 거동을 탄성으로 가정하였기 때문이라고 판단된다. (2) 탄성영역 거동에 대해 해석모델이 전체 거동을 비교적 잘 모사하는 반면, 벽체 상호간에 걸친 힘의 분포에 있어서 실험과 상당한 차이를 보여주었다. (3) 최대지진에서 벽체의 전단변형은 비교적 잘 모사한 반면 휨변형의 경우 10배정도 과장되었다. 이는 일부 해석모델에서 인방보를 무시한 결과로 추정된다.

• Composites Research
• /
• 제18권2호
• /
• pp.20-29
• /
• 2005

수지의 유리 전이화 온도$(170^{\circ}C)$ 이상에서 복합재 연소관의 굽힘 변형 및 강도를 평가하기 위해 재료의 비선형성과 연속 파손 모드가 고려된 유한요소해석모델이 제시되었고, 해석 모델의 타당성 입증을 위해 연소관과 동일 제작 공법과 적층을 가진 굽힘 시험편을 이용한 4점 굽힘 강도 시험이 수행되었다. 또한 비교해석을 위해 고온에서 복합재 재료물성 시험이 수행되었다. 수지의 유리 전이화 온도 이상에서 수지 관련 재료 물성이 현저하게 저하됨에 따라, $200^{\circ}C$에서 굽힘 시험편의 굽힘 강성은 상온 기준으로 약 $70\%$, 굽힙 강도는 약 $80\%$의 저하율을 나타내었다. 파손 모드가 수지의 유리 전이화 온도 이하에서 바닥 면의 $90^{\circ}$층수지 균열로 시작하여 시편 중앙의 층간 분리로 이어지는 연속 파손모드였으나, 유리천이온도 이상에서는 시편 표면층의 섬유 압축 파손으로 변화되었다 해석을 통해 연속 파손 모드가 잘 구현되었고, 예측한 굽힘 강도와 강성이 시험 견과와 좋은 일치를 보였다

• Advances in concrete construction
• /
• 제10권1호
• /
• pp.49-59
• /
• 2020

Precast concrete elements in accelerated bridge construction (ABC) extends from superstructure to substructure, precast pile foundation has proven a benefit for regions with fragile ecological environment and adverse geological condition. There is still a lack of knowledge of the seismic behavior and performance of the precast pile foundation. In this study, a 1/8 scaled model of precast pile foundation with elevated cap is fabricated for quasi-static test. The failure mechanism and responses of the precast pile-soil interaction system are analyzed. It is shown that damage occurs primarily in precast pile-soil interaction system and the bridge pier keeps elastic state because of its relatively large cross-section designed for railways. The vulnerable part of the precast pile with elevated cap is located at the embedded section, but no plastic hinge forms along the pile depth under cyclic loading. Hysteretic curves show no significant strength degradation but obvious stiffness degradation throughout the loading process. The energy dissipation capacity of the precast pile-soil interaction system is discussed by using index of the equivalent viscous damping ratio. It can be found that the energy dissipation capacity decreases with the increase of loading displacement due to the unyielding pile reinforcements and potential pile uplift. It is expected to promote the use of precast pile foundation in accelerated bridge construction (ABC) of railways designed in seismic regions.

• Composites Research
• /
• 제26권2호
• /
• pp.91-98
• /
• 2013

복합재 이중-겹침 볼트 체결부의 파손을 예측하기 위해 손상계수를 고려한 강성저하 방법과 Hashin의 3차원 파손판정식에 근거한 3차원 유한요소해석 방법을 제안하였다. 기지 혹은 면내(In-plane) 전단 손상을 고려하기 위해 손상변수를 이용하는 Ladeveze 이론을 섬유방향 강성저하와 연계하여 사용하였고, 수지 압축/전단, 수지 인장/전단, 섬유압축, 섬유 인장 등 4가지 파손모드를 고려하였다. 상업용 유한요소 프로그램인 ABAQUS를 이용하여 마찰력과 볼트 체결력을 고려하였고, 강성저하모델 처리를 위해 ABAQUS의 사용자 정의 부프로그램을 이용하였다. 제안된 유한요소해석 방법을 검증하기 위해 복합재 이중겹침 볼트 체결부 시험 결과와 파손강도를 비교한 결과 7~16% 오차를 보임을 확인하였다.