Browse > Article
http://dx.doi.org/10.12989/gae.2017.12.4.723

Advanced discretization of rock slope using block theory within the framework of discontinuous deformation analysis  

Wang, Shuhong (Key Laboratory of Ministry of Education on Safe Mining of Deep Metal Mines, School of Resources and Civil Engineering, Northeastern University)
Huang, Runqiu (State Key Laboratory of Geohazard Prevention and Geoenvironment Protection, Chengdu University of Technology)
Ni, Pengpeng (GeoEngineering Centre at Queen's-RMC, Department of Civil Engineering, Queen's University)
Jeon, Seokwon (Rock Mechanics and Rock Engineering Laboratory, Department of Energy Systems Engineering, Seoul National University)
Publication Information
Geomechanics and Engineering / v.12, no.4, 2017 , pp. 723-738 More about this Journal
Abstract
Rock is a heterogeneous material, which introduces complexity in the analysis of rock slopes, since both the existing discontinuities within the rock mass and the intact rock contribute to the degradation of strength. Rock failure is often catastrophic due to the brittle nature of the material, involving the sliding along structural planes and the fracturing of rock bridge. This paper proposes an advanced discretization method of rock mass based on block theory. An in-house software, GeoSMA-3D, has been developed to generate the discrete fracture network (DFN) model, considering both measured and artificial joints. Measured joints are obtained from the photogrammetry analysis on the excavation face. Statistical tools then facilitate to derive artificial joints within the rock mass. Key blocks are searched to provide guidance on potential reinforcement measures. The discretized blocky system is subsequently implemented into a discontinuous deformation analysis (DDA) code. Strength reduction technique is employed to analyze the stability of the slope, where the factor of safety can be obtained once excessive deformation of slope profile is observed. The combined analysis approach also provides the failure mode, which can be used to guide the choice of strengthening strategy if needed. Finally, an illustrated example is presented for the analysis of a rock slope of 20 m height inclined at $60^{\circ}$ using combined GeoSMA-3D and DDA calculation.
Keywords
rock slope; stability analysis; block theory; strength reduction technique; discontinuous deformation analysis (DDA); artificial joints;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Dawson, E., Roth, W. and Drescher, A. (1999), "Slope stability analysis by strength reduction", Geotechnique, 49(6), 835-840.   DOI
2 Elmouttie, M. and Poropat, G. (2012), "A method to estimate in situ block size distribution", Rock Mech. Rock Eng., 45(3), 401-407.   DOI
3 Elmouttie, M., Poropat, G. and Krahenbuhl, G. (2010a), "Polyhedral modelling of rock mass structure", Int. J. Rock Mech. Min. Sci., 47(4), 544-552.   DOI
4 Elmouttie, M., Poropat, G. and Krahenbuhl, G. (2010b), "Polyhedral modelling of underground excavations", Comput. Geotech., 37(4), 529-535.   DOI
5 Ferrero, A.M., Migliazza, M., Roncella, R. and Rabbi, E. (2011), "Rock slopes risk assessment based on advanced geostructural survey techniques", Landslides, 8(2), 221-231.   DOI
6 Goodman, R.E. and Shi, G.H. (1985), Block Theory and Its Application to Rock Engineering, Prentice-Hall Englewood Cliffs, NJ.
7 Griffiths, D.V. and Lane, P.A. (1999), "Slope stability analysis by finite elements", Geotechnique, 49(3), 387-403.   DOI
8 Hatzor, Y. and Feintuch, A. (2001), "The validity of dynamic block displacement prediction using DDA", Int. J. Rock Mech. Min. Sci., 38(4), 599-606.   DOI
9 Ikegawa, Y. and Hudson, J. (1992), "A novel automatic identification system for three-dimensional multiblock systems", Eng. Comput., 9(2), 169-179.   DOI
10 Kalenchuk, K.S., Diederichs, M.S. and McKinnon, S. (2006), "Characterizing block geometry in jointed rockmasses", Int. J. Rock Mech. Min. Sci., 43(8), 1212-1225.   DOI
11 Kim, Y.I., Amadei, B. and Pan, E. (1999), "Modeling the effect of water, excavation sequence and rock reinforcement with discontinuous deformation analysis", Int. J. Rock Mech. Min. Sci., 36(7), 949-970.   DOI
12 Lambert, C., Thoeni, K., Giacomini, A., Casagrande, D. and Sloan, S. (2012), "Rockfall hazard analysis from discrete fracture network modelling with finite persistence discontinuities", Rock Mech. Rock Eng., 45(5), 871-884.   DOI
13 Laouafa, F. and Darve, F. (2002), "Modelling of slope failure by a material instability mechanism", Comput. Geotech., 29(4), 301-325.   DOI
14 Li, L.C., Tang, C.A., Zhu, W.C. and Liang, Z.Z. (2009), "Numerical analysis of slope stability based on the gravity increase method", Comput. Geotech., 36(7), 1246-1258.   DOI
15 Lin, D. and Fairhurst, C. (1988), "Static analysis of the stability of three-dimensional blocky systems around excavations in rock", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 25(3), 139-147.
16 Liu, J.L., Luan, M.T., Zhao, S.F., Yuan, F.F. and Wang, J.L. (2005), "Discussion on criteria for evaluating stability of slope in elastoplastic FEM based on shear strength reduction technique", Yantu Lixue (Rock and Soil Mechanics) -CHINESE EDITION- 26(8), 1345-1348.
17 MacLaughlin, M., Sitar, N., Doolin, D. and Abbot, T. (2001), "Investigation of slope-stability kinematics using discontinuous deformation analysis", Int. J. Rock Mech. Min. Sci., 38(5), 753-762.   DOI
18 Mauldon, M. (1998), "Estimating mean fracture trace length and density from observations in convex windows", Rock Mech. Rock Eng., 31(4), 201-216.   DOI
19 Ni, P., Wang, S.H., Wang, C.G. and Zhang, S.M. (2016a), "Estimation of REV size for fractured rock mass based on damage coefficient", Rock Mech. Rock Eng. DOI: 10.1007/s00603-016-1122-x   DOI
20 Ni, P., Wang, S.H., Zhang, S.M. and Mei, L. (2016b), "Response of heterogeneous slopes to increased surcharge load", Comput. Geotech., 78, 99-109.   DOI
21 Stead, D., Eberhardt, E. and Coggan, J. (2006), "Developments in the characterization of complex rock slope deformation and failure using numerical modelling techniques", Eng. Geol., 83(1), 217-235.   DOI
22 Ning, Y., Yang, J., An, X. and Ma, G. (2011), "Modelling rock fracturing and blast-induced rock mass failure via advanced discretisation within the discontinuous deformation analysis framework", Comput. Geotech., 38(1), 40-49.   DOI
23 Shen, H. and Abbas, S.M. (2013), "Rock slope reliability analysis based on distinct element method and random set theory", Int. J. Rock Mech. Min. Sci., 61, 15-22.
24 Shi, G.H. (1992), "Discontinuous deformation analysis: a new numerical model for the statics and dynamics of deformable block structures", Eng. Computation., 9(2), 157-168.   DOI
25 Shi, G.H. (2007), Applications of Discontinuous Deformation Analysis (DDA) to Rock Engineering, Computational Mechanics, Springer, pp. 136-147.
26 Shi, G.H. and Goodman, R.E. (1989), "The key blocks of unrolled joint traces in developed maps of tunnel walls", Int. J. Numer. Anal. Meth. Geomech., 13(2), 131-158.   DOI
27 Tschuchnigg, F., Schweiger, H.F., Sloan, S., Lyamin, A.V. and Raissakis, I. (2015a), "Comparison of finiteelement limit analysis and strength reduction techniques", Geotechnique, 65(4), 249-257.   DOI
28 Tschuchnigg, F., Schweiger, H.F. and Sloan, S. (2015b), "Slope stability analysis by means of finite element limit analysis and finite element strength reduction techniques. Part I: Numerical studies considering nonassociated plasticity", Comput. Geotech., 70, 169-177.   DOI
29 Wang, S.H., Lee, C.I., Ranjith, P.G. and Tang, C.A. (2009), "Modeling the effects of heterogeneity and anisotropy on the excavation damaged/disturbed zone (EDZ)", Rock Mech. Rock Eng., 42(2), 229-258.   DOI
30 Wang, S.H. and Ni, P. (2014), "Application of block theory modeling on spatial block topological identification to rock slope stability analysis", Int. J. Comp. Meth. Sing., 11(1), 1350044. DOI: 10.1142/S0219876213500448   DOI
31 Wang, S.H, Ni, P., Yang, H. and Xu, Y. (2011), "Modeling on spatial block topological identification and their progressive failure analysis of slope and cavern rock mass", Procedia Eng., 10, 1509-1514.   DOI
32 Yarahmadi Bafghi, A.R. and Verdel, T. (2004), "The probabilistic key-group method", Int. J. Numer. Anal. Meth. Geomech., 28(9), 899-917.   DOI
33 Wang, S.H., Huang, R.Q., Ni, P., Ranjith, P.G. and Zhang, M.S. (2013a), "Fracture behavior of intact rock using acoustic emission: experimental observation and realistic modeling", Geotech. Test. J., 36(6), 1-12. DOI: 10.1520/GTJ20120086   DOI
34 Wang, S.H, Ni, P. and Guo, M.D. (2013b), "Spatial characterization of joint planes and stability analysis of tunnel blocks", Tunn. Undergr. Sp. Tech., 38, 357-367.   DOI
35 Yarahmadi Bafghi, A.R. and Verdel, T. (2003), "The key-group method", Int. J. Numer. Anal. Meth. Geomech., 27(6), 495-511.   DOI
36 Zhao, X., Zhao, J., Cai, J. and Hefny, A. (2008), "UDEC modelling on wave propagation across fractured rock masses", Comput. Geotech., 35(1), 97-104.   DOI
37 Zheng, H., Sun, G. and Liu, D. (2009), "A practical procedure for searching critical slip surfaces of slopes based on the strength reduction technique", Comput. Geotech., 36(1-2), 1-5.   DOI
38 Chang, Y.L. and Huang, T.K. (2005), "Slope stability analysis using strength reduction technique", J. Chinese Inst. Eng., 28(2), 231-240.   DOI
39 Zienkiewicz, O.C., Humpheson, C. and Lewis, R.W. (1975), "Associated and non-associated visco-plasticity and plasticity in soil mechanics", Geotechnique, 25(4),671-689.   DOI
40 Baecher, G., Lanney, N. and Einstein, H. (1977), "Statistical description of rock properties and sampling", Proceedings of the 18th US Symposium on Rock Mechanics (USRMS), American Rock Mechanics Association.
41 Chugh, A. (1986), "Variable factor of safety in slope stability analysis", Geotechnique, 36(1), 57-64.   DOI