• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.514-517
• /
• 2006

Nonseismic designed RC frame have a possibility of shear failure because of deficiencies of reinforcing details. To model the shear failure in numerical analysis, shear strength degradation models which include Moehle's and ATC 40 are compared and applied to push-over analysis. For numerical analysis, three storied building frame is selected and designed according to Korean Concrete Design Code(2003). From the numerical analysis, it is pointed out that there may be great difference in lateral drift capacity if a different shear strength model is used. And the capacity can be severely underestimated if the restraining model of plastic rotation of ATC 40 is used, compared to the use of shear spring for shear degradation.

• Biomolecules & Therapeutics
• /
• 제1권1호
• /
• pp.31-36
• /
• 1993

To evaluate the feasibility of transmucosal delivery of methionine enkephalin analog, [$D-Ala^2$]-me-thionine enkephalinamide (YAGFM), the influence of pH, temperature, ionic strength and initial peptide concentration on the physicochemical stability of YAGFM in aqueous buffered solutions were investigated using a stability-indicating HPLC method. The degradation of YAGFM followed the pseudo-first-order kinetics. From the pH-rate profile, the maximum stability of YAGFM was shown to be at the pH of about 5.0. The halflife for the degradation of YAGFM was found to be 181.3 days at pH 5.0 and $37^{\circ}C.$ Arrhenius plots of the data obtained at 25~$45^{\circ}C$ were reasonably linear with a correlation coefficient greater than 0.99, and the activation energy was calculated to be 8.9 kcal/mole. A higher ionic strength and/or a higher peptide concentration in buffered solutions retarded the degradation of YAGFM.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.181-194
• /
• 2017

The biodegradability of polylactic acid(PLA) fabrics was evaluated by two methods: enzyme and soil degradation. Three different enzymes were selected to evaluate. Degradation times were measured at optimal enzyme treatment conditions. Biodegradation by enzymatic hydrolysis was compared with soil degradation. As a result, biodegradation created cracks on the fiber surface, which led to fiber thickening and shortening. In addition, new peak was observed at $18.5^{\circ}$ by degradation. Moreover, cracks indicating biofragmentation were confirmed by enzyme and soil degradation. By enzyme and soil degradation, the weight loss of PLA fabrics was occurred, there through, the tensile strength decreased about 25% by enzyme hydrolysis when 21 days after, and 21.67% by soil degradation when 60 days after. Furthermore, the biodegradability of PLA fabrics by enzymatic and soil degradation was investigated and enzymatic degradation was found to be superior to soil degradation of PLA fabrics. Among the three enzymes evaluated for enzymatic degradation, alcalase was the most efficient enzymes. This study established the mechanism of biodegradation of PLA nonwovens, which might prove useful in the textile industry.

• 한국건축시공학회지
• /
• 제18권5호
• /
• pp.455-461
• /
• 2018

본 연구에서는 현재 국내에 일반적으로 적용되고 있는 폴리우레탄 도막방수재를 대상으로 12개월간의 장기 화학열화요인 작용 시 재료적 측면에서의 성능변화 특성을 인장성능 중심으로 평가하고, 도출된 데이터를 회귀분석기법을 적용하여 정량적 회귀식을 제시함에 따라 폴리우레탄 도막방수재의 장기내구성 확보여부에 대하여 대략적으로 성능예측 가능한 기초적 데이터 베이스를 구축하였다. 화학적 열화 환경에서 폴리우레탄 도막방수재는 약 23%~38%의 강도 저하를 나타냈다. 또한 신장률의 경우 약 15%~22%의 성능 저하를 나타내는 것을 확인할 수 있었으며, 제시한 회귀방정식은 화학적 열화조건에서 도막재의 성능 변화 정도를 예측하는데 활용 가능할 것으로 판단된다.

• 한국세라믹학회지
• /
• 제34권3호
• /
• pp.257-264
• /
• 1997

MPB조성영역에 MnO2를 첨가한 압전체를 제조하여 분극처리후에 반복압축응력을 부여함에 따른 압전열화 현상을 조사하고 분극처리 전후의 굽힘강도의 변화 및 파괴특성을 연구하였다. MnO2를 0.25wt.% 첨가한 시편에서 가장 적은 열화현상이 일어났다. 굽힘강도는 분극처리 후 하중방향에 평행한 방향으로 분극처리한 시편이 분극처리 전보다 높은 강도를 나타내었고, 수직한 방향으로 분극처리한 시편은 낮은 값을 나타내었다. 이는 분극처리시 발생하는 전계방향으로 압축잔류응력, 직각방향으로 인장잔류응력 때문인 것으로 사료된다.

• 한국세라믹학회지
• /
• 제34권9호
• /
• pp.915-920
• /
• 1997

Tetragonal ZrO2 polycrystal (TZP), consisted of 90.24 mol% ZrO2-5.31 mol% Y2O3-4.45 mol% Nb2O5, were prepared using hot-press and mechanical properties and high-temperature degradation were investigated. The specimen, hot-pressed for 1 h at 140$0^{\circ}C$ in Ar atmosphere, exhibited flexural strength of 1010 MPa and fracture toughness of 7.5 MPam1/2 and experienced no low-temperature degradation below 40$0^{\circ}C$. However, as aged for 100h at temperatures higher than 40$0^{\circ}C$, TZP was suffered by high-temperature degradation due to an extensive cavitation caused by the oxidation of carbon. XPS observation revealed that the carbon incorporated in TZPs during hot-pressing exists as either an ether-type CO or a carbonyl-type C=O. Despite of the high-temperature degradation of t-ZrO2 co-doped with Y2O3 and Nb2O5, its flexural strength and fracture toughness were superior to those of the commercial 3 mol% Y2O3-TZP hot-pressed under the identical condition as determined before and after the aging treatments.

• Earthquakes and Structures
• /
• 제7권6호
• /
• pp.1061-1070
• /
• 2014

An iterative hybrid structural dynamic reliability prediction model has been developed under multiple-time interval loads with and without consideration of stochastic structural strength degradation. Firstly, multiple-time interval loads have been substituted by the equivalent interval load. The equivalent interval load and structural strength are assumed as random variables. For structural reliability problem with random and interval variables, the interval variables can be converted to uniformly distributed random variables. Secondly, structural reliability with interval and stochastic variables is computed iteratively using the first order second moment method according to the stress-strength interference theory. Finally, the proposed method is verified by three examples which show that the method is practicable, rational and gives accurate prediction.

• The Journal of Advanced Prosthodontics
• /
• 제12권5호
• /
• pp.265-272
• /
• 2020

PURPOSE. The aims of this study were to investigate mechanical properties and hydrothermal degradation behaviour of the cubic-containing translucent yttrium oxide stabilized tetragonal zirconia polycrystal (Y-TZP). MATERIALS AND METHODS. Four groups of Y-TZP (T, ST, XT, and P), containing different amount of cubic crystal, were examined. Specimens were aged by autoclaving at 122℃ under 2 bar pressure for 8 h. Phase transformation was analyzed using X-ray diffraction (XRD) to measure phase transformation (t→m). Kruskal-Wallis test was used to determine the difference. Surface hardness, biaxial flexural strength, and fracture toughness in values among the experimental groups and verified with Wilcoxon matched pairs test for hardness values and Mann Whitney U for flexural strength and fracture toughness. RESULTS. XRD analysis showed no monoclinic phase in XT and P after aging. Only Group T showed statistically significant decreases in hardness after aging. Hydrothermal aging showed a significant decrease in flexural strength and fracture toughness in group T and ST, while group XT and P showed no effect of aging on fractural strength and fracture toughness with P<.05. CONCLUSION. Hydrothermal aging caused reduction in mechanical properties such as surface hardness, biaxial flexural strength, and fracture toughness of Y-TZP zirconia. However, cubic-containing zirconia (more than 30% by volume of cubic crystal) was assumed to have high resistance to hydrothermal degradation. Clinical significance: Cubic-containing zirconia could withstand the intraoral aging condition. It could be suggested to use as a material for fabrication of esthetic dental restoration.

• 한국결정성장학회지
• /
• 제14권5호
• /
• pp.199-203
• /
• 2004

유사구강 분위기인 인공타액 조건하에서 인공치아용 상부구조물 재료 중 하나인 3Y-TZP를 500~3000 N의 하중 조건으로 $10^6$ 횟수까지 헤르찌안 반복하중을 가하여 그 피로특성을 압입손상과 강도저하현상으로 관찰하였다. 500 N의 하중에서 $5\times10^5$ 반복 횟수까지 피로실험결과, 강도저하 및 균열현상은 관찰되지는 않았지만 반복하중 값이 증가함에 따라 링 균열에서 방사상 균열로 전이되었을 때 급격한 강도 저하현상이 관찰되었다. 또한 강도 저하 현상은 유사 구강분위기하에서 반복 하중 접촉시 발생한 균열을 통해 침투한 인공타액의 화학적 침식으로 가속화 되었다.

• 한국세라믹학회지
• /
• 제40권7호
• /
• pp.662-666
• /
• 2003

인공치관용 알루미나-유리 복합체를 유사 구강분위기인 인공타액 하에서 200-1000 N의 하중 조건으로 $10^{6}$ 횟수까지 헤르찌안 반복하중 피로특성을 조사하였다. 200 N의 하중에서 $10^{6}$까지 반복피로 실험결과, 강도 저하 및 균열 현상은 관찰되지 않았다. 하중이 1000 N으로 증가함에 따라 링 균열에서 방사상 균열로 전이되었을 때 급격한 강도 저하 현상이 발생하였다. 강도 저하 현상은 유사 구강 분위기하에서 반복 하중 접촉 시 발생한 방사상 균열을 통해 침투한 인공타액과 유리상의 화학적 반응으로 더욱 가속화 되었다.