• 전기학회논문지
• /
• 제65권9호
• /
• pp.1571-1576
• /
• 2016

A Tesla coil is an electrical resonant transformer circuit invented by Nikola Tesla in 1891. It is used to produce high-voltage, low-current, high frequency alternating-current electricity. Tesla coil can generate a long streamer with several million volts of electricity as a high voltage device. It is basically consists of a voltage transformer, high voltage capacitor, spark gap, primary coil, secondary coil and toroid. It is difficult to appear in the output size of the streamer is controlled by the spark gap. The general decision method of the length of streamer is to display the electric output in accordance with the design specifications in initial development plan. Design specifications and the electric output is determined by the application of facilities. In this paper the spark gap is replaced with periodic switching semiconductor device to control output voltage easily in order to apply overvoltage protective circuit due to a secondary coil and a performance test. In these days, their main use is for entertainment and educational displays of the museum, although small coils are still used as leak detectors for high vacuum systems.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권12호
• /
• pp.627-632
• /
• 2001

There are claims that ESE(Early streamer emission) Air terminals offer a vastly increased zone of protection over that of traditional lightning rods by causing the emission of an upward streamer/leader that will propagate towards the tip of downward leader at an early stage in the attachment process than would occur for a simple rod in the same geometrical configurations. This paper shows the results of comparing test a particular type of ESE air terminals with a simple rod conducted in the KEH HV laboratory, which are lightning impulse voltage test, flashover direction test and corona emission current measurement. The results from this test show a completely random scattering of flashovers to the conventional and ESE air terminals under identical electrics] and geometrical conditions, and thus shows no advantage of one terminal over the other.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2109-2111
• /
• 2005

The effect of arc like streamer discharge is investigated on the hydrogen generation in the plasma reactor with multineedle - plate electrode geometry and SDR (Plasma reactor using the surface discharge). An additive of the two type (the saw type and the pellet type) was placed under the water surface to investigate the effect of the water surface conditions. The experimental results are compared in case of the reactor with and without an additive on the water surface. The generation of arc streamer discharge is more powerful with increasing applied voltage in the saw type. The maximum hydrogen Production concentration is about 4300 ppm at 74W in the SDR with additive of the saw type. Also, the Energy yield of the SDR (28990 g/kWh, 4300ppm, 74W) is higher than of the multineedle - plate electrode geometry (20892g/kWh, 3300ppm, 77W).

• 한국의류학회지
• /
• 제47권2호
• /
• pp.371-391
• /
• 2023

This study examines the impact of live commerce characteristics on customer responses in the ELM perspective. Based on ELM, the central route is composed of information completeness, accuracy, and currency, and the peripheral route is composed of streamer credibility, streamer reputation, social presence, and system quality. An online survey of female customers aged 20 to 49 who have purchased beauty products through live commerce within the past three months was conducted. The results demonstrate that information completeness and information currency exert significant impact on perceived usefulness and enjoyment. Social presence and system quality also exert significant impact on perceived usefulness and enjoyment. Moreover, perceived usefulness and enjoyment had significant impact on behavioral intention. The effect of information completeness on perceived usefulness and enjoyment was much stronger for high product involvement groups. Furthermore, the effect of streamer reputation on perceived enjoyment was much stronger for high product involvement groups. In contrast, the effect of social presence on perceived usefulness and enjoyment was much stronger for low product involvement groups. This study suggests theoretical implications for applying ELM to live commerce and practical implications for differentiated live commerce marketing strategies.

• 지구물리와물리탐사
• /
• 제8권1호
• /
• pp.50-58
• /
• 2005

하저지반은 단층대의 분포가능성이 매우 높으나 수층으로 인해 지표지질조사가 불가능하여 단층대를 파악하기가 쉽지 않다. 하상 전기비저항 탐사는 하저지반에 대한 연속적인 영상을 제공하여 주므로 단층이나 연약대의 위치를 파악하는데 매우 효과적인 탐사법이다. 하저터널의 설계에서는 단층대의 위치뿐만 아니라 단층대의 주향방향이 매우 중요한 요소이다. 단층대의 주향방향을 파악하는 방법으로는 격자형의 측선에 대한 광대역 조사가 매우 효과적이다. 하지만. 종래의 하상 전기비저항 탐사는 케이블을 하저에 설치하여야 하므로 광대역 조사에 적합하지 않다. 이에 이 연구에서는 소형보트에 스트리머 케이블을 설치하여 신속하게 광대역의 하저지반을 영상화하는 스트리머 전기비저항 탐사의 적용성에 대해 고찰하였다. 스트리머 전기비저항 탐사에 의한 단층대의 분해능을 고찰하기 위하여, 수직단층이 수층 하부의 퇴적층에 피복되어 있는 모형을 설정하여 수치모형실험을 수행하였다. 전극의 설치위치와 수심의 변화에 따른 수직단층의 분해능에 대해 살펴보았으며, 그 결과 수층의 두께가 전극간격의 2 배 이내인 경우에는 전극을 수층 표면에 설치하는 방식으로도 단층을 영상화할 수 있음을 보였다. 또한, 스트리머 전기비저항 탐사에 적합한 4 가지의 전극배열법을 설정하여 신호대 잡음비와 수직 단층의 분해능을 비교 검토하였다. 수치모형실험을 기초로 하여 한국 서울에 위치한 한강의 하저터널 예정부지에서 하상 전기비저항 탐사를 수행하였다. 하저터널 예정노선에서는 고분해능의 영상이 요구되므로 하저에 전극을 설치하여 자료를 획득하였으며, 2차원 역산을 적용하여 강 양단에서 단층대로 추정되는 3개의 저비저항 이상대를 탐지하였다. 저비저항 이상대의 윈인을 규명하기 위하여 시추조사를 수행하였으며, 그 결과 수 m 이상의 폭을 가지는 다수의 단층이 관측되었다. 단층대의 주향방향을 탐지하기 위하여 확인된 저비저항 이상대를 중심으로 격자형의 측선을 설정하여 스트리머 전기비저항 탐사를 수행하였다. 이를 통해 하저에 케이블을 설치하는 방식에 비해 매우 신속하고 경제적으로 하저에 분포하는 이상대의 분포범위와 발달방향을 규명할 수 있었다.

• 전기의세계
• /
• 제27권4호
• /
• pp.3-6
• /
• 1978

(차례) 1.기체방전형식의 분류 2.기체방전기구 (1)Streamer (Primary와 Secondary) (2)Leader (3)Return Stroke와 Spark 3.문제점

• 한국연소학회지
• /
• 제8권1호
• /
• pp.9-16
• /
• 2003

Carbon soot emission from combustion processes, especially from diesel engines, is a subject of growing concern since soot is known to seriously affect human health. Efforts have been made to oxidize soot particles utilizing Non-Thermal Plasma(NTP) techniques. When oxygen is carried into a plasma device, electrons generated by the plasma dissociate the oxygen, resulting in the formation of oxygen atoms. These highly activated atoms, called O radicals, are known as strong oxidizing agent. This paper presents concentration variations of CO and $CO_2$ at the exit of the plasma device, resulting from the soot oxidation by O radicals, with variations of inlet oxygen concentration, gas temperature, and gas flow rate. Based on the data, Arrehenious rate constants of reactions between C(s)+O and C(s)+O+O were proposed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1061-1064
• /
• 2001

Deep Interests have been paid on the application of non-thermal plasma technique to solve the environmental pollution problems. $CO_2$, is one of the severe pollutants which cause the acid rain and global warming. In this study, in order to improve the conversion efficiency of $CO_2$, the streamer corona discharge plasma and barrier discharge plasma reactors were made, and the conversion characteristics of $CO_2$by the corona discharge plasma and some discharge characteristics of these discharge chambers are studied experimentally.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.904-907
• /
• 2002

In this study, the plasma-assisted $CO_2$ conversion characteristics were investigated in the streamer corona discharge and silent discharge reactors with dielectric of $Al_2O_3$, to improve the conversion efficiency $CO_2$. Some discharge characteristics of $CO_2$ as parameters of gap spacing and applied voltage frequency, in both corona and silent discharge reactor were also obtained. The maximum $CO_2$ conversion rate was 10.1 [%] under the 5.2 [W] of discharge power and 250 [Hz] of applied voltage frequency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1649-1651
• /
• 2001

The effect of ribbed spacers having metallic particle attached to the post-type spacer on dielectric breakdown phenomena has been investigated using electric field analysis for imaginary streamer process and a breakdown experiment. It was described that the electric field analysis and the dielectric breakdown test were performed on the case that the particle was attached to the various position of the ribbed spacer having various shapes. As a result, the breakdown voltage of the spacer with two ribs was highest, and it was varied by the length and the thickness of the rib. Especially, in case of the rib with round edge, the breakdown voltage was higher than that with rectangular edge, which complied with the result through the field analysis.