• 대한기계학회논문집B
• /
• 제29권5호
• /
• pp.577-589
• /
• 2005

The present study has numerically investigated two-dimensional laminar flow over a steadily rotating circular cylinder with a uniform planar shear, where the free-stream velocity varies linearly across the cylinder. It aims to find the combined effect of rotation and shear on the flow. Numerical simulations using the immersed boundary method are performed for the ranges of $-2.5{\le}\alpha{\le}2.5$ and $0{\le}K{\le}0.2$ at a fixed Reynolds number of Re=100, where a and K are respectively the dimensionless rotational speed and velocity gradient. Results show that the positive shear, with the upper side having the higher free-stream velocity than the lower one, favors the effect of the counter-clockwise rotation $(\alpha<0)$ but countervails that of the clockwise rotation $(\alpha>0)$. Accordingly, the absolute critical rotational speed, below which vortex shedding occurs, decreases with increasing K for $(\alpha>0)$, but increases for $\alpha>0$. The vortex shedding frequency increases with increasing \alpha (including the negative) and the variation becomes steeper with increasing K. The mean lift slightly decreases with increasing K regardless of the rotational direction. However, the mean drag and the amplitudes of the lift- and drag-fluctuations strongly depend on the direction. They all decrease with increasing K for $\alpha>0$, but increase for $\alpha<0$. Flow statistics as well as instantaneous flow folds are presented to identify the characteristics of the flow and then to understand the underlying mechanism.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.328-340
• /
• 2008

This study examined the characteristics of furniture design in the early Modernism that occurred in the early 20th Century through the relationship with modern arts. The furniture design of the early Modernism was established in the early 20th Century based on the simplicity and honesty of the Art and Crafts Movement and Anti-Historicism in Art Nouveau. During this period, the necessity of mass production became critical due to the radical industrialization and new social demands. In such periodic stream, the furniture design of the early modernism pursued simplicity and geometric beauty based on functionalism. The efforts to discover the fundamental structure of furniture were intensified. It was not limited to furniture design but was also exercised in the huge periodic transformation that progressed in every field of art including architecture. The Modernism art has also been connected to Cubism and spread into an abstract direction. While questioning the potential essence and progressing the study on genuine characteristics, the Modernism art tried to return things into their substantial looks and reorganize them conceptually, rather than reproducing external objects. The furniture that was secondary to a part of architecture and interior accessory transcended its decorative purpose. It pursued the structure to follow its fundamental purpose as furniture. Such tendency corresponded to the direction that Post-Modernism followed. Likewise, both art and design had the revivable and abstract characteristics based on the identical objective in ideology. For this reason, the formative and geometric characteristics of the early modernism furniture design have a mutual relationship with modern arts. Particularly, such tendency intensified and progressed through the Bauhaus in Germany. Based on such facts, this study proved that the early Modernism furniture design in the 20th Century tended to appear in common arts including the art and design according to the social demand of the huge periodic stream. Furthermore, the ideology that was adopted in art and design, as well as its formative characteristics, was examined through the mutual relationship of modern arts and design.

• 인터넷정보학회논문지
• /
• 제17권6호
• /
• pp.53-59
• /
• 2016

최근 무선 센서 네트워크, 사물 인터넷, 소셜 네트워크 서비스와 같은 다양한 응용 분야에서 대용량 스트림 데이터가 실시간으로 생성되고 있으며, 효율적인 기법을 통해 처리 및 분석하여 유용한 정보를 찾아내고, 이를 의사 결정을 위해 사용할 수 있도록 하는 것은 중요한 이슈 중에 하나이다. 스트림 데이터는 끊임없이 빠른 속도로 생성되므로 최소한의 접근을 통해 처리해야 하며, 신속한 저전력 처리를 필요로 하는 자원이 제한된 환경에서 분석될 수 있도록 적합한 기법이 요구된다. 이러한 문제를 해결하기 위해, 슬라이딩 윈도우 개념이 제안되어 연구되고 있다. 한편, 대용량 데이터로부터 의미 있는 정보를 찾아내기 위한 데이터 마이닝 기법 중에 하나인 패턴 마이닝은 중요 정보를 패턴 형태로 추출한다. 전통적인 빈발 패턴 마이닝은 이진 데이터베이스를 대상으로 하고 모든 아이템을 동일한 중요도로 고려함으로써 데이터 마이닝 분야에서 중요한 역할을 수행해 왔지만, 실제 데이터 특성을 반영하지 못하는 단점을 지닌다. 하이 유틸리티 패턴 마이닝은 비 이진 데이터베이스로부터 상대적인 아이템 중요도를 반영하여 더욱 의미 있는 정보를 찾아내기 위해 제안되었다. 정적 데이터를 대상으로 하는 하이 유틸리티 패턴 마이닝 기법은 그러나 스트림 데이터 처리에 적합하지 못하다. 제한된 환경에서 스트림 데이터의 특성을 반영하고 효율적으로 처리하여 중요한 정보를 찾아내기 위해 슬라이딩 윈도우 기반의 접근법이 제안되었다. 본 논문은 슬라이딩 윈도우 기반 하이 유틸리티 패턴 마이닝 기법들의 성능을 평가하고 분석하여 해당 기법들의 특성 및 발전 방향을 고찰한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2420-2425
• /
• 2007

Heat transfer from three-dimensional heat-generating modules was investigated. A simulated electronic module in an array configured with dummy module elements was used to measure the average heat transfer coefficients. Various module arrangements were tested using module spacings of 0.85 and 1.15 cm for six Reynolds numbers ranging from 500 to 975. The results show that a module placed in-line with and upstream of a heated module results in the heat transfer enhancement due to a high level in turbulence prompted by upstream modules. The highest enhancement occurs when the separation distance between modules is close to the module length in the flow direction. Flow visualization reveals laminar flow on the front of the first module, slow recirculation regions on the sides parallel to the air stream, and turbulence on the back side. It appears that the first module serves to trip the air stream and produce a high level of turbulence, which enhances the heat transfer rate downstream.

• 한국환경과학회지
• /
• 제12권6호
• /
• pp.605-613
• /
• 2003

In order to make use of the protection effect against wind by the vegetation, it examined whether it should make what vegetation form and arrangement using the 2-dimensional non-hydrostatic model. When the foliage shielding factor increases, it becomes hard to take in protection effect against wind in a residential section. When it makes height of vegetation high, it becomes hard to take in protection effect against wind with height. In the comparison in the case where vegetation high is gradually made low toward wind-stream from a vegetation, and the case of making it low gradually, although former tends to receive the protection effect against wind by the vegetation, attenuation of wind velicity becomes large. In the comparison in the case where foliage shielding factor and distribution of density of leaf are gathered gradually toward wind-stream from a vegetation. It has been understood to evaluate to height the influence that the vegetation multi-layer model by which the heat revenue and expenditure in the direction of the vegetation height is considered is used, and to characterize the vegetation group by the parameter setting.

• 대한기계학회논문집
• /
• 제16권6호
• /
• pp.1163-1170
• /
• 1992

본 연구에서는 자동차 전자제어식 공기유량계를 Fig.2와 같이 평행평판 안에 사각 지주가 있다고 단순화하고 공기는 이차원 비 압축성 점성유동으로 가정했다. 지배방정식은 유체 운동량방정식(navier-Stokes equation)을 와도 전달 방정식(vorti- city transport equation)과 유량 함수 방정식(stream function equation)으로 변환하 여 사용하였다. Peacemanrachford ADI 방법으로 수치해석 하였으며, 유량 함수 방정 식의 수렴성을 좋게 하기 위하여 Wachspress parameter를 사용하였다. 벽면의 경계 조건은 Briely의 4th-order Lagrange interpolation 방법을 따랐다. Reynolds 수 200과 500에서의 비정상유동(unsteady flow)을 계산하였으며, 유동이 정상상태(steady state)에 도달하였을 때에 유동을 교란시켜 와동 흘림(vortex shedding)을 구하였다.

• 설비공학논문집
• /
• 제2권3호
• /
• pp.166-176
• /
• 1990

Experimental study was made to find the effective ways for cooling of engine room in a power car through natural ventilation, forced ventilation and wind tunnel test of 1:10 model. Through the measurements of inner temperature of engine room and pressure distribution of model surface for the various opening combinations and the fan locations, the following results are obtained. For natural ventilation, side and top opening combination is more effective than the side openings only and optimal opening combination is all side openings with top center opening. For forced ventilation with fan on the roof, the combination of all sides and top opening is more effective than the combination of side and top opening, and the optimal location of fan is top center. When the model is located in the air stream, the combination of side and top opening is more effective than the side openings only, and the optimal location of top opening is the front opening. With both air stream and forced ventilation, the optimal location of fan is the side region, and the direction of side grill installation is found to have negligible effect on the room ventilation.

• 한국환경복원기술학회지
• /
• 제21권3호
• /
• pp.67-81
• /
• 2018

We tried to analyze qualitatively a total of 110 the research papers which were related domestic ecological restoration technologies about 15 years through semantic network analysis in social network analysis. In order to understand the research trends of ecological restoration technologies, we analyzed the degree centrality and betweenness centrality of the Stream/Wetland, Slope, Soil/Others fields selected as Word Cloud. As a result, ecological restoration technologies have been changed. They were focused on the restoration of species or their habitats in the past. However, they have been evolved into the detailed systems to respond in unpredictable natural disasters and climate change, high-resolution image implementation technology to accurately grasp the practical environment and methods related to environmental restoration for human in urban ecosystem. In the future, investment and technology for the ecosystem restoration field will be continuously demanded for the symbiosis of human beings and species in the damaged ecosystem. Therefore, the research trend of ecological restoration technologies should be provided as reliable guidelines when decision makers establish the policy direction or when researchers select their subjects.

• 상하수도학회지
• /
• 제25권5호
• /
• pp.667-679
• /
• 2011

In this study, the influences of pollutant from Dae-po Stream and So-gam Stream located at the downstream of Nak-dong River on the water quality at Mul-geum water intake station were analyzed using RAMS model. Field measurements of velocity by ADCP, and water quality distribution of BOD and TP by water sampling were carried out to present the input and verification data for numerical simulations. The comparison between RAM2 and ADCP measurement, which aimed for the analysis of 2-D velocity distribution around Mul-geum water intake station showed that two results matched well along the spanwise direction. The prediction of pollutant concentration by RAM4 agreed fairly well with the measured data except for the points nearby right banks in the vicinity of tributary pollutant source. Flushing effect by the increase of mainstream discharge in Nak-dong River was analyzed to provide the damage mitigation in preparation for the accidental water pollution. With increasing mainstream discharge, high velocity and increased water quantity induced increasing dilution effect, thereby decreasing the inflow pollutant concentration rapidly.

• 한국분무공학회지
• /
• 제3권4호
• /
• pp.43-49
• /
• 1998

In order to clarify the effect of equivalence ratio and kinds of fule in flame structure, a numerical simulation of triple flame developed in a co-flowing methane-air and air stream was carried out by the elementary chemical reaction mechanism. The following conclusions were obtained. Equivalence ratio at which the apparent burning velocity is maximum is a little larger than that of the one-dimensional premixed flame. Apparent burning velocities are two times higher than that of the one-dimensional premixed flame for the methane-air. The flame thrusts out forward in the downstream of the boundary between mixture and air stream, and a part of the flow is bent and forks out in this protruding flame so that a triple flame is originated; this triple flame is composed of fuel rich and lean premixed flame branches and a diffusion flame branch. Near the equivalence ratio at which the burning velocity of rule-dimensional premixed flame is the largest the effect of one-dimensional premixed flame becomes large and the fuel rich premixed flame advances and becomes vertical to the flow direction.