• Economic and Environmental Geology
• /
• v.35 no.2
• /
• pp.163-170
• /
• 2002

The purpose of this study is to analyze the relationship between geology and geothermal gradient in South Korea using GIS. For the analysis, 352 temperature logging wells were constructed to spatial database and the relationships beween geothermal gradient and geological time and lithology were analyzed using the overlay the wells layer and 1:1,000,000 scale geological map layer. The average of the geothermal aradient of South Korea is 29.34$^{\circ}C$/km. In the geologic sequence, Cenozoic strata has 39.7$0^{\circ}C$/km, Mesozoic strata has 30.63$^{\circ}C$/km , Paleozoic strata has 22.32$^{\circ}C$/km, Proterozoic strata 23.15$^{\circ}C$/km geothermal gradient value. In the lithological aspect, plutonic rocks 33.96$^{\circ}C$/km, sedimentary rocks have 24.78$^{\circ}C$/km and sedimentary and volcanic rocks have 26.85$^{\circ}C$/km geotermal gradient value. The result can be used to develop geothermal energy and hot spring as a reference.

• Economic and Environmental Geology
• /
• v.29 no.2
• /
• pp.193-209
• /
• 1996

Paleomagnetic and rock-magnetic data have been obtained from the Cretaceous rocks (Yeongdong Group, volcanic rock, and intrusive rocks) which are exposed in the Yeongdong Basin. The characteristic remanent directions of these rocks, which are mainly carried by magnetite and hematite of single and pseudo-single domain sizes, are normally magnetized (Yeongdong Group: $D/I=29.6/59.0^{\circ}C$, k=75.7, ${\alpha}_{95}=3.3^{\circ}$, N=25 sites, paleopole at $198.0^{\circ}E$, $66.4^{\circ}N$, K=46.1, $A_{95}=4.3^{\circ}$; volcanic rock: $D/I=352.8/44.1^{\circ}$, k=44.2, ${\alpha}_{95}=18.8^{\circ}$, N=3 sites, paleopole at $340.0^{\circ}E$, $78.8^{\circ}N$, $K=49.8^{\circ}E$, $A_{95}=17.6^{\circ}$X>; intrusive rocks: $D/I=358.4/51.9^{\circ}C$, k=20.0, ${\alpha}_{95}=13.8^{\circ}$, N=7 sites, paleopole at $338.1^{\circ}E$, $86.8^{\circ}N$, K=13.5, $A_{95}=17.1^{\circ}$). The stepwise unfolding of the characteristic remanent magnetization (ChRM) of the Yeongdong Group reveals that a maximum value of k is observed at 60% of unfolding with $D/I=13.0/58.6^{\circ}$ (k=124.62, ${\alpha}_{95}2.6^{\circ}$) indicating that the ChRM was aquired during ti1ting of the strata. This remagnetized ChRM in the sedimentary strata is due to acquisition of geomagnetic field direction at the time of formation of authigenic magnetic minerals, although it is not totally ruled out that the formation of authigenic magnetic minerals was affected indirect1y by the elevated temperature originated from the volcanic and intrusive rocks which intruded between Late Cretaceous and Early Tertiary.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.381-393
• /
• 2014

Seismic reflection data are integrated with fieldwork data in order to understand startigraphy, structural geology and hydrocarbon potentials of Cretaceous strata in the Mesopotamian basin, Northeastern Iraq. Cretaceous strata in the basin divided into the Qamchuqa, Kometan, Bekhme and Shiranish formations, which are composed of carbonates deposited in shallow marine environment. The geological structures in these formations are mainly recognized as thrusts, detachment folds, fault propagation folds and fault bend folds. As well, NW-SE trending fractures are regularly developed, and are horizontal or perpendicular to the structures. The distribution and frequency of fractures are related to the development of the thrusts. In terms of hydrocarbon potentials, Cretaceous strata in the basin have limited capacities for source rocks and seal rocks due to the lack of organic carbon content and the well-developed fractures, respectively. Although these carbonates have limited primary porosity, however, development of the secondary porosity derived from the fractures contributes to enhance the reservoir quality. Most important factor for the reservoir quality of Cretaceous strata seems to be the frequency and connectivity of fractures relative to locations of folds and faults. The results delineated in this study will use as reference for recognizing stratigraphy and structures of Cretaceous strata and will provide useful information on hydrocarbon potentials of Cretaceous strata in the Mesopotamian basin, NE Iraq.

• Geomechanics and Engineering
• /
• v.22 no.4
• /
• pp.349-359
• /
• 2020

Quantification of the influence of the fracture of thick magmatic rock (TMR) on the behavior of its overlying strata is a prerequisite to the understanding of the deformation behavior of the earth's surface in deep mining. A three-dimensional numerical model of a special geological mining condition of overlying TMR was developed to investigate the overburden movement and fracture law, and compare the influence of the occurrence horizon of TMR. The research results show that the movement of overlying rock was greatly affected by the TMR. Before the fracture of TMR, the TMR had shielding and controlling effects on the overlying strata, the maximum vertical and horizontal displacement values of overlying strata were 0.68 m and 0.062 m. After the fracture, the vertical and horizontal displacements suddenly increased to 3.06 m and 0.105 m, with an increase of 350% and 69.4%, respectively, and the higher the occurrence of TMR, the smaller the settlement of the overlying strata, but the wider the settlement span, the smaller the corresponding deformation value of the basin edge (the more difficult the surface to crack). These results are of tremendous importance for the control of rock strata and the revealing of surface deformation mechanism under TMR mining conditions in mines.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.3 s.49
• /
• pp.139-151
• /
• 2006

Base metal sulfides occur in the Huronian sedimentary rocks that cover the Archean volcanic rocks in the Cobalt area, Ontario, Canada. They are mostly concentrated in the basal conglomerate which was formed in the pre-Huronian basin structure. Sulfide occurrence can be grouped as massive sulfide clasts in the basal and Coleman conglomerate, disseminated sulfides throughout the sediments, and disseminated sulfides near Ag-Co-Ni-As carbonate veins. Detrital mechanism can explain features such as angularity of sulfide fragments and graded bedding of dissemnated sulfides. Sulfides concentrated near carbonate veins are probably of hydrothermal origin. Nearby strata-bound type massive sulfide ore deposits and mineralized interflow units are the most probable sources for syngenetic sulfides. This is supported by the angularity of sulfide fragments, presence of massive sulfide boulders which are identical in mineralogy and texture to the strata-bound type sulfide deposits in the Archean basement, and a similar composition of sphalerite in the Archean volcanic rocks and Huronian sedimentary rocks. Some sulfide grains, especially in sandstones and argillites, were undergone recrystallization during the intrusion of the Nipissing diabase.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.10
• /
• pp.41-53
• /
• 2016

Stability of the braced earth wall in the composite ground, which is composed of the jointed base rocks and the soil strata depends on the earth pressure acting on it. In most cases, the earth pressure is calculated by the empirical method, in which base rocks are considered as a soil strata with the shear strength parameters of base rocks. In this case the effect of the joint dips of the jointed base rocks is ignored. Therefore, the calculated earth pressure is smaller than the actual earth pressure. In this study, the magnitude and the distribution of the earth pressure acting on the braced wall in the composite ground depending on the joint dips of the base rocks and the ratio of soil strata and base rocks were experimentally studied. Two dimensional large-scale model tests were conducted in a large scale test facility (height 3.0 m, length 3.0 m and width 0.5 m) by installing 10 supports in a scale of 1/14.5. The test ground was presumed with the base rock ratio of the composite ground of 65%:35% and 50%:50% and with the joint dips for each base rock layer, $0^{\circ}$, $30^{\circ}$, $45^{\circ}$ and $60^{\circ}$, respectively. And then finite element analyses were performed in the same condition. As results, the earth pressure on the braced wall increased as the base rock layer's joint dips became larger. And earth pressure at the rock layer increased as the rock rate became larger. The largest earth pressure was measured when the base rock rate was 50% (R50) and the rock layer's joint dips was $60^{\circ}$. Based on these results, a formular for the calculation of the earth pressure in the composite ground could be suggested. Distribution of earth pressure was idealized in a quadrangular form, in which the magnitude and the position of peak earth pressure depended on the rock ratio and the joint dips.

• Economic and Environmental Geology
• /
• v.23 no.1
• /
• pp.59-71
• /
• 1990

Magnetic anisotropy of a total of 213 independently oriented Tertiary rock samples from Pohang-Ulsan area has been studied. The sampled strata comprise basalts, tuffs and black shale, and range in age from Eocene to Miocene. The previous palaeomagnetic studies indicate that their magnetic carrier minerals are titanomagnetites. Among 23 sampled sites, 11 sites were found to preserve magnetic load foliation parallel to the bedding plane caused by the Iithostatic load of the overlying strata. Other 4 sites showed magnetic lineation indicating the flow direction of lava and tuffs. The remaining 8 sites revealed the magnetic tectonic foliation nearly vertical to the bedding plane. This magnetic foliation is interpreted to be generated by tectonic compression which acted nearly horizontally during the solidification stage of the strata. The compression directions deduced from the tectonic foliation of the 8 sites can be grouped into internally very consistent two group: a N-S trending one and the other WNW-ESE trending one. It is interpreted that the former N-S compression was associated with the N-S spreading of the East Sea(Sea of Japan) and the dextral strike-slip movement of the Yangsan-Ulsan fault system. The latter WNW-ESE compression is interpreted to represent the folding and reverse faulting activity in the Korean and Tsushima straits during middle/late Miocene times.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.397-407
• /
• 2022

Mineralogical analysis of the bedrock of the Gobi Desert in southern Mongolia, the source of Asian dust, was conducted to trace the geological origin of the constituent minerals of Asian dust. The bedrock of the source of Asian dust consists of Paleozoic volcanics and volcaniclastic sedimentary rocks, Paleozoic granitic rocks, and Mesozoic sedimentary rocks. Paleozoic volcanics and volcaniclastic sediments lithified compactly, underwent greenschist metamorphism, and deformed to form mountain ranges. Mesozoic sedimentary rocks fill the basin between the mountain ranges of Paleozoic strata. In comparison to Paleozoic volcanic and sedimentary rocks, Mesozoic sedimentary rocks have lower contents of chlorite and plagioclase, but high contents of clay minerals including interstratified illite-smectite, smectite, and kaolinite. Paleozoic granites characteristically contain amphibole and biotite. Compared with the mineral composition of bedrock in source, Asian dust is a mixture of detrital particles originating from Paleozoic and Mesozoic bedrocks. However, the mineral composition of Mesozoic sedimentary rocks is closer to that of Asian dust. Less lithified Mesozoic sedimentary rocks easily disintegrated to form silty soils which are deflated to form Asian dust.

• Journal of the Korean Society of Earth Science Education
• /
• v.14 no.1
• /
• pp.48-58
• /
• 2021

The purpose of this study is to analyze the contents related to the strata in the elementary science textbooks and to investigate the strata concepts of preservice elementary teachers. As a result of the study, most of the strata knowledge in elementary textbook has an explicit sentence structure, such as A is B. it is limited to being used as a subject of discussion and debate among students in science classes. Formal knowledge, although its meaning is clear, is disadvantageous as a material for core competency education. Regarding strata concepts, 70% of preservice elementary teachers thoughts that heat and pressure were the only key factors in turning sediments into hard rocks. Regarding whether information about the natural information in the geological period can be obtained through the strata, 20% thought that information on the natural environment could be obtained only through fossils and not from the strata. Even 80% of preservice elementary school teachers who thought that informations on the past natural environment could be obtained from the stratum showed a lot of scientific misconceptions in the information contents. In conclusion, in order to increase the effect of core competency education through elementary science education, it is necessary to review the form and contents of strata knowledge presented in elementary science textbooks.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.431-438
• /
• 1999

Vertical congressive and horizontal pile load tests were performed to a instrumented large diameter (D : 1,000 mm) drilled shaft. A drilled shaft was penetrated into the weathered soil and weathered rock. PMT was done for evaluation of properties for these strata. It was expected to be difficult to get undisturbed samples of weathered soils and rocks. Thus. PMT was done at the several selected depths. In those strata, to prevent the test bore hole from collapsing, bentonite slurry was used for making the test bore hole. In this study. soil properties was evaluated by means of PMT results and estimating method (direct method, the Memard method) of vertical pile capacity and horizontal pile behaviors were summarized. Also, vertical and horizontal pile capacity were calculated using PMT and pile load test results.