• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1494-1501
• /
• 2006

Mechanical and physical properties of a copper alloy for a liquid rocket engine(LRE) combustion chamber liner application were tested at various temperatures. All test specimens were heat treated with the condition they might experience during actual fabrication process of the LRE combustion chamber. Physical properties measured include thermal conductivity, specific heat and thermal expansion data. Uniaxial tension tests were preformed to get mechanical properties at several temperatures ranging from room temperature to 600$^{\circ}C$. The result demonstrated that yield stress and ultimate tensile stress of the copper alloy decreases considerably and strain hardening increases as the result of the heat treatment. Since the LRE combustion chamber operates at higher temperature over 400$^{\circ}C$, the copper alloy can exhibit time-dependent behavior. Strain rate, creep and stress relaxation tests were performed to check the time-dependent behavior of the copper alloy. Strain rate tests revealed that strain rate effect is negligible up to 400$^{\circ}C$ while stress-strain curve is changed at 500$^{\circ}C$ as the strain rate is changed. Creep tests were conducted at 250$^{\circ}C$ and 500$^{\circ}C$ and the secondary creep rate was found to be very small at both temperatures implying that creep effect is negligible for the combustion chamber liner because its operating time is quite short.

• 한국정밀공학회지
• /
• 제31권10호
• /
• pp.889-895
• /
• 2014

Machine parts and structures of a change in the displacement and strain can be evaluated safety is one of the important factors. Typically the strain gauge has been employed to measure the displacement and strain. However, this contact-type measurement method has disadvantages that are not measured under condition of specific object shape, surface roughness and temperature. In particularly, 3 point bending and 4 point bending test not use strain gauge. So its test used cross head displacement and deflect meter. Digital Image Correlation measurement methods have many advantages. It is non contact-type measurement method to measure the object displacements and strain. In addition, it is possible to measure the Map of full field displacements and strain. In this paper, measured the 3 point bending deflection using the Digital Image Correlation methods. In order to secure the reliability, Digital Image Correlation method and universal test machine were compared.

• 한국미생물·생명공학회지
• /
• 제27권5호
• /
• pp.399-403
• /
• 1999

For the production of trehalose, microorganisms capable of producing trehalose extracellularly were screened from the stock cultures in our laboratory. among them, Micrococcus luteus IFO 12708 showed the highest productivity of trehalose. For the increase of productivity, the mutant strai Hs-208 having higher trehalose production was selected with NTG(N-methyl-N'-nitrosoguanidine) mutagenesis, which led to the decrease of the specific activity of trehalose phosphorylase(3.2-fold) as compared to the wild strain. The optimum condition for the trehalose production was established as follows: 20g/l of glucose and 6g/l of tryptone were used as a sole carbon source and nitrogen source, respectively, and cultivations were carried out at 3$0^{\circ}C$ and pH 6.0. After 20hrs cultivation, addition of 20unit/ml penicillin G led to the higher conversion yield of trehalose. Under the optimum condition, 6.547g/l trehalose was produced with conversion yield of 32.7%.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권3호
• /
• pp.354-357
• /
• 2005

The in vitro degradability of yeast and the effect of yeast on the in vitro degradability of forage may differ in terms of the specific yeast strains or their incubation conditions. Thus in experiment 1, two strains of sake yeast (strainK7 and strainK9) and one strain of bakers' yeast (KY5649) were incubated in an aerobic condition. In experiment 2, aerobically or anaero bically incubated K7 was used for investigating the in vitro degradability of yeast, the effect of yeast on the in vitro degradability of forage, and the degradability of yeast by pepsin and pronase treatment. The in vitrodegradability of bakers' yeast was significantly (p<0.05) higher than those of sake yeasts. The in vitro degradability of anaerobically incubated yeast was significantly (p<0.01) higher than that of aerobically incubated yeast. The degradability of bakers' yeast by pepsin treatment was significantly (p<0.01) higher than that of the sake yeasts. The degradability of bakers' yeast by pronase treatment was slightly higher than that of the two sake yeasts, while the degradability of anaerobically incubated yeast by both enzymes, respectively, was significantly (p<0.01) higher than that of aerobically incubated yeast. The degradability of forages was increased significantly (p<0.05) by the addition of yeasts. The degradability of roughage by sake yeast tended to be higher than that by the bakers' yeast. The degradability of roughage was significantly (p<0.05) higher by anaerobically incubated yeast than by aerobically incubated yeast. Given the above results, it seems that in vitro degradability of yeast and the magnitude of the increment of roughage degradation differ among the yeast strains and their incubation conditions.

• Journal of Microbiology and Biotechnology
• /
• 제17권2호
• /
• pp.207-217
• /
• 2007

The Saccharomyces0 cerevisiae KNU5377 strain, which was isolated from spoilage in nature, has the ability to convert biomass to alcohol at high temperatures and it can resist against various stresses [18, 19]. In order to understand the defense mechanisms of the KNU5377 strain under menadione (MD) as oxidative stress, we used several techniques for study: peptide mass fingerprinting (PMF) by matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry (MS) followed by two-dimensional (2D) gel electrophoresis, liquid chromatography electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS), and surface-enhanced laser desorption ionization-time of flight (SELDI-TOF) technology. Among the 35 proteins identified by MALDI-TOF MS, 19 proteins including Sod1p, Sod2p, Tsa1p, and Ahp1p were induced under stress condition, while 16 proteins were augmented under normal condition. In particular, five proteins, Sod1p, Sod2p, Ahp1p, Rib3p, Yaf9p, and Mnt1p, were induced in only stressed cells. By LC-ESI-MS/MS analysis, 37 proteins were identified in normal cells and 49 proteins were confirmed in the stressed cells. Among the identified proteins, 32 proteins were found in both cells. Five proteins including Yel047cp and Met6p were only upregulated in the normal cells, whereas 17 proteins including Abp1P and Sam1p were elevated in the stressed cells. It was interesting that highly hypothetical proteins such as Ynl281wp, Ygr279cp, Ypl273wp, Ykl133cp, and Ykr074wp were only expressed in the stressed cells. SELDI-TOF analysis using the SAX2 and WCX2 chips showed that highly multiple-specific protein patterns were reproducibly detected in ranges from 2.9 to 27.0 kDa both under normal and stress conditions. Therefore, induction of antioxidant proteins, hypothetical proteins, and low molecular weight proteins were revealed by different proteomic techniques. These results suggest that comparative analyses using proteomics might contribute to elucidate the defense mechanisms of KNU5377 under MD stress.

• 한국미생물·생명공학회지
• /
• 제25권3호
• /
• pp.235-239
• /
• 1997

Chlorococcum littorale has been grown in high $CO_2$ concentrations to utilize $CO_2$ gas in the polluted air. The effect of incident light intensity on the specific growth rate is expressed by a photoinhibition model, showing half- saturation constant, $K_0\;as\;8\;(W/m^2)$ and inhibition constant, Ki as 35 $(W/m^2)$. The maximum specific growth rate was also estimated as 0.095 (1/day) under this condition. This strain maintained the optimum growth rate in 20% of $CO_2$ gas but 50% of input $CO_2$ gas is the maximum concentration considering the economical efficiency. The maximum Specific $CO_2$ consumption rate, $qCO_2$ was measured as 17.48 (mg $CO_2/g$ dry wt./day) in batch cultivation, 11.2 (mg $CO_2/g$ dry wt./day) in fed-batch cultivation and 10.87 (mg $CO_2/g$ dry wt./day) at 0.065 (1/day) of dilution rate in continuous cultivation. The chemical composition of the biomass obtained from this process showed 32.5% of protein, 27.5% of lipid, 16.5% of carbohydrate and ash 11.7%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1127-1132
• /
• 2003

Suspension system of vehicle have enough endurance during its life time to protect passenger. Spring is one of major part of vehicle. Thus, a fatigue strength evaluation for leaf spring based on road load response was carried out. At first, strain of leaf spring is measured on the city condition and proving ground condition. And next, the damage analysis of road load response data was carried out. And fatigue test of leaf spring were also carried out. Based on -N life relation, fatigue life of leaf spring was evaluated at belgian mode, city mode and drawing test specification. After that, it is compared the design life of leaf spring and evaluated fatigue life by belgian mode, city mode and drawing test specification. From the above, the maximum load-fatigue life relation of leaf spring was defined by test. and new test target of belgian mode and city mode was proposed to accept design specification of leaf spring. It is expect that proposed test target can verify leaf spring fatigue endurance at specific road condition.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.758-761
• /
• 2001

In this study, the nar promoter of E. coli was characterized to see whether the nar promoter cloned onto pBBR122 can be used as an expression promoter of gram negative microbes. For this purpose, a plasmid with lacZ gene expressing ${\beta}-galactosidase$ instead of the structural genes of nar operon in a gram negative host strain(Agrobacterium.tumefaciens) was used to simplify an assay of induction of the nar promoter. The following effects were investigated to find optimal conditions: methods of inducing the nar promoter, optimal nitrate concentration, maximally inducing the nar promoter, the amount of expressed ${\beta}-galactosidase$ and induction ratio(specific ${\beta}-galactosidase$ activity after maximal induction/specific ${\beta}-galactosidase$ activity before induction). The following results were obtained from the experiments: the growth of Agrobacterium with E.coli nar promoter was not much affected by nitrate concentration in the shake-flask; induction of nar promoter was optimal when Agrobacterium was grown in the presence of 1% nitrate ion at the beginning of culture and when overnight culture was completely grown in the shake-flask before being transferred to other shake-flask; the amount of ${\beta}-galactosidase$ per cell and per medium volume was maximal when Agrobacterium was grown under aerobic condition to $OD_{600}$ of 1.7; then the nar promoter was induced under microaerobic and anaerobic condition made by lowering dissolved oxygen level(DO). After 2-3h of induction in the YEP medium selected as a main culture medium, the specific ${\beta}-galactosidase$ activity became about 17,000 Miller units in the fermentor cluture.

• Journal of Microbiology and Biotechnology
• /
• 제15권1호
• /
• pp.66-71
• /
• 2005

Doxorubicin is a clinically important anticancer polyketide compound that is typically produced by Streptomyces peucetius var. caesius. To improve doxorubicin productivity by S. peucetius, a doxorubicin pathway-specific regulatory gene, dnrI, was cloned into a high-copy-number plasmid containing a catechol promoter system. The S. peucetius containing the recombinant plasmid exhibited approximately 9.5-fold higher doxorubicin productivity compared with the wild-type S. peucetius. The doxorubicin productivity by this recombinant S. peucetius strain was further improved through the optimization of culture media composition. Based on the Fractional Factorial Design (FFD), cornstarch, $K_2HPO_4$, and $MgSO_4$ were identified to be the key factors influencing doxorubicin productivity. The Response Surface Method (RSM) results based on 20 independent culture conditions with varying amounts of key factors predicted the highest theoretical doxorubicin productivity of 11.1 mg/l with corn starch of 46.33 g/l, $K_2HPO_4$ of 4.63 g/l, and $MgSO_4$ of 9.26 g/l. The doxorubicin productivity of the recombinant S. peucetius strain with the RSM-based optimized culture condition was experimentally verified to be 11.46 mg/l, which was approximately 30.8-fold higher productivity compared with the wild-type S. peucetius without culture media optimization.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.111-118
• /
• 2002

Recent study of soft clay of Nakdong-River basin has been taken correlation between soil properties by regression analysis without distribution whether the sample is disturbed or not, or treated as a whole area without proposing local correlation equation to Jang-U or Dae-Joe which has a specific locality. Accordingly, Those tendency cause the reliability of correlation between compression index and void ratio low and then design underestimate and uncertain eventually. In this study, Distributing the soft clay of Nakdong-River basin with failure strain of 6%, the suggestion by Skempton(1957), TakeNaka(1966)-the more sample is undisturbed, the more the ratio of E$\_$50/ and ｑ$\_$u/, ${\alpha}$ = E$\_$50//(q$\_$u//2) = 1/$\varepsilon$$\_$50/ is high-is satisfied with the value of which ${\alpha}$ is 50 and It could be taken enough data in the condition of domestic. Besides other indices also make the distribution suitable. In conclusion, This study is supposed to propose the locally subdivided regression equation between compression index and void ratio considering the sample disturbance.