• 제목/요약/키워드: strain selection

검색결과 391건 처리시간 0.026초

Monitoring of Gentic Variability in Dicofol-susceptible, Dicofol-resistant, and its Reverse-selected Strains of Tetranychus urticae by RAPD-PCR

  • Song, Cheol;Park, Jin-Hee;Kim, Gil-Hah;Kwon, O-Yu;Cho, Kwang-Yun
    • Journal of Life Science
    • /
    • 제9권1호
    • /
    • pp.14-16
    • /
    • 1999
  • Genetic variability was monitored by random amplified polymorphic DNA-polymerase chain reaction (RAPD-PCR) in dicofol-susceptible (S), dicofol-resistant (R) and its reverse-selected (RS) strains of two-spotted spider mite, of Tetranychus urticae. Before the reverse-selection, RS strain, selected reversely from R strain, was 23-fold resistance ratio at {TEX}$LC_{50}${/TEX} to S strain. The resistance was started to in incline slowly to the resistance level of S strain after one year, and the resistance ratio was 4-fold in the 7 years after then. PCR-amplification of T. urticae DNA showed polymorphism in the amplifications with 12 primers in 100 kinds of arbitrary DNA sequences. RAPD amplification with primer OPR-12 (5`-ACAGGTGCGT-3`) showed amplified bands at 1,000 base pair in the S-and RS-strain, and at 350 base pair in R-strain. The results of polymorphism are genetic variabilities derived from development and selection of resistance in each strain. The peculiarly amplified fragments were guessed to participate in dicofol resistance. From the analysis of genetic similarity, it is inferred the gene composition of S-and RS-strain is much closer than that of R-strain.

  • PDF

Selection of design friction angle: a strain based empirical method for coarse grained soils

  • Sancak, Emirhan;Cinicioglu, Ozer
    • Geomechanics and Engineering
    • /
    • 제20권2호
    • /
    • pp.121-129
    • /
    • 2020
  • In the design of geotechnical structures, engineers choose either peak or critical state friction angles. Unfortunately, this selection is based on engineer's preference for economy or safety and lacks the assessment of the expected level of deformation. To fill this gap in the design process, this study proposes a strain based empirical method. Proposed method is founded on the experimentally supported assumption that higher dilatancy angles result in more brittle soil response. Using numerous triaxial test data on ten different soils, an empirical design chart is developed that allows the estimation of shear strain at failure based on soil's peak dilatancy angle and mean grain diameter. Developed empirical chart is verified by conducting a small scale retaining wall physical model test. Finally, a design methodology is proposed that makes the selection of design friction angle in structured way possible based on the serviceability limits of the proposed structure.

Evaluation of Strains of Metarhizium anisopliae and Beauveria bassiana against Spodoptera litura on the Basis of Their Virulence, Germination Rate, Conidia Production, Radial Growth and Enzyme Activity

  • Petlamul, Wanida;Prasertsan, Poonsuk
    • Mycobiology
    • /
    • 제40권2호
    • /
    • pp.111-116
    • /
    • 2012
  • Ten strains of the entomopathogenic fungi Metarhizium anisopliae and Beauveria bassiana were evaluated to find the most effective strain for optimization studies. The first criterion tested for strain selection was the mortality (> 50%) of Spodoptera litura larvae after inoculation of the fungus for 4 days. Results on several bioassays revealed that B. bassiana BNBCRC showed the most virulence on mortality S. litura larvae (80% mortality). B. bassiana BNBCRC also showed the highest germination rate (72.22%). However, its conidia yield ($7.2{\times}10^8$ conidia/mL) was lower than those of B. bassiana B 14841 ($8.3{\times}10^8$ conidia/mL) and M. anisopliae M6 ($8.2{\times}10^8$ conidia/mL). The highest accumulative radial growth was obtained from the strain B14841 (37.10 mm/day) while the strain BNBCRC showed moderate radial growth (24.40 mm/day). M. anisopliae M6 possessed the highest protease activity (145.00 mU/mL) while M. anisopliae M8 possessed the highest chitinase activity (20.00 mU/mL) during 96~144 hr cultivation. Amongst these criteria, selection based on virulence and germination rate lead to the selection of B. bassiana BNBCRC. B. bassiana B14841 would be selected if based on growth rate while M. anisopliae M6 and M8 possessed the highest enzyme activities.

식성이상잠에 관한 연구 I. 광식성계통 Fb잠의 유래와 성상 (Studies on Food Habit Mutation in the Silkworm (I). The Origin and Characteristics of Polyphagous Strain Fb in Bombyx mori.)

  • 노시갑;김경아
    • 한국잠사곤충학회지
    • /
    • 제37권1호
    • /
    • pp.27-32
    • /
    • 1995
  • 광식성계통 Fb잠은 1991년 춘잠기부터 양배추에 대한 섭식성을 기준으로 선발되었다. 선발 7세대째에 상엽분말을 전혀 함유하지 않은 합성사료에 의해 인공사료육을 실시하였으며 그 결과 양배추에 대한 섭식율은 급격히 증가하였다. 1994년 추기까지 14세대 동안 선발을 계속한 결과 95%이상의 양배추 섭식율을 나타냈다. 이 계통은 일반 인공사료뿐 만 아니라 수종의 채소류와 과일류에 대해서도 높은 섭식률을 나타냈으며, 견형질면에 있어서도 상당히 우수하였다.

  • PDF

Genetic Improvement of Some Traits in Four Strains of Silkworm, Bombyx mori L.

  • Moghaddam S. H. Hosseini;Jomeh K. N. Emam;Mirhosseini S. Z.;Gholamy M. R.
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제10권2호
    • /
    • pp.95-99
    • /
    • 2005
  • A breeding plan was carried out on four commercial strains of silkworm (Bombyx mori L.) 101, 102, 103 and 104 to improve some important traits. Genetic gain or response to selection $({\Delta}G)$, heritability of cocoon shell weight (CSW) and specific combining ability effects were estimated to determine the strains that can be improved. Strain 101 had lowest heritabitity, ${\Delta}G$ and viability. Strain 102 was acceptable in selection response but its viability was low. Therefore these two strains were not suitable for more selection. As a result, only lines 103 and 104 were chosen for further improvement. Intra population selection based on independent culling level method practiced from third to sixth generation for both productive and viability traits simultaneously. While CSW and CW had increasingly enhanced during primary generations, they went slightly up after third generation. According to negative genetic correlation, viability decreased during primary generations, but after third generation that paid attention to balanced development of both productive and viability traits, viability increased so that the pupation rate reached to $91\%$ in 103 and $97\%$ in 104 for last generation $(G_8)$.

Tobramycin 고생산성 변이주의 분리 (Selection of High Tobramycin-Producing Mutants)

  • 나규흠;김학주;김기태;양중익;김계원
    • 한국미생물·생명공학회지
    • /
    • 제19권4호
    • /
    • pp.343-347
    • /
    • 1991
  • Tobramycin 고생산성 변이주를 쉽고 신속하게 선별하 수 있는 screening 방법을 개발하였다. 고농도의 apramycin이 포함된 배지를 사용함으로서 nebramycin 생산성이 낮은 변이주들은 1차적으로 제거할 수 있었다. 모균주인 S. tenerbarius ATCC 17920에는 저지환을 나타내지 못하고 생산성이 향상된 변이주의 경우에만 저지환을 형성하는 strain No.23을 토양으로부터 분리하여 Ps. paucimobilis로 동정하였고 1차 선별된 변이주들 중 tobramycin 생산성이 높은 균주들을 선별하기 위한 피검균으로 사용하였다. 이러한 screening 전략으로 strain No.23에 명확히 저지환을 나타내는 변이주 58주를 얻었고, HPLC를 이용하여 각 변이주의 tobramycin 생산성을 비교 측정한 결과 모균주에 비해 3-8배 생산성이 향상되었음을 확인하였다.

  • PDF

Strain Gauge의 Blade내 설치위치 최적화 (Robust Optimal Positioning of Strain Gauges on Blades)

  • Park, Byeong-Keun;Yang, Bo-Suk;Marc P. Mignolet
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문초록집
    • /
    • pp.345.2-345
    • /
    • 2002
  • This paper focuses on the formulation and validation of an automatic strategy for the selection of the locations and directions of strain gauges to capture at best the modal response of a blade in a series of modes. These locations and directions are selected to render the strain measurements as robust as possible with respect to random mispositioning of the gauges and gauge failures. (omitted)

  • PDF

산업용 Saccharomyces cerevisiae에서 Ethionine 저항성 유전자의 발현 (Expression of Ethionine Resistance Conferring Gene in an Industrial Strain of Saccharomyces cerevisiae)

  • 박정남;이경희;고현미;서국헌;진종언;이황희;배석
    • 한국미생물·생명공학회지
    • /
    • 제32권4호
    • /
    • pp.356-361
    • /
    • 2004
  • The ethionine resisconferring gene (ERCI) was constitutively expressed under the control of the alcohol dehydrogenase gene promoter (ADClp) and introduced into the chromosomes of an industrial polyploid strain of Saccharocerevisiae by using the 8-sequences of the Tyl retrotransposon as the recombination site. 8-Integrative cassette devoid of bacterial DNA sequences containing the ampicillin resistance gene was constructed that had the aureobasidin A resistance gene (AURl-C) as the selection marker and ERCl gene. The ERCl gene was also employed as the selection marker in the 8-integrative cassette lacking the A URl-C gene. Industrial Saccerevisiae transformed with these integrative cassettes exhibited strong resistance to DL-ethioncompared with nontransformants.

변위기여도 및 변형에너지밀도를 활용한 초고층 건물의 센싱 부재 선정 (Selection of Sensing Members in a High-rise Building Structures using Displacement Participation Factors and Strain Energy Density)

  • 이홍민;박성우;박효선
    • 한국전산구조공학회논문집
    • /
    • 제22권4호
    • /
    • pp.349-354
    • /
    • 2009
  • 초고층 건물의 안전성 및 사용성을 합리적으로 확보하고 유지하기 위해서 부재의 구조 반응 모니터링은 필요하다. 이러한 대형 건물의 건전도 모니터링은 최근 들어 많은 연구자들에 의해서 관심 되어지고 있지만 건물 특성상 계측 대상 부재가 많고 하중과 구조반응의 관계가 복잡하기 때문에 센싱 부재 선정의 어려움으로 그 적용에 한계가 있다. 본 논문에서는 부재의 변위기여도 및 변형에너지밀도를 기반으로 초고층 건물의 안전성 모니터링을 위한 구조반응 계측 부재 선정에 대한 연구를 수행하였다.

Selection of Lecanicillium Strains with High Virulence against Developmental Stages of Bemisia tabaci

  • Park, Hee-Yong;Kim, Keun
    • Mycobiology
    • /
    • 제38권3호
    • /
    • pp.210-214
    • /
    • 2010
  • Selection of fungal strains with high virulence against the developmental stages of Bemisia tabaci was performed using internal transcribed spacer regions. The growth rate of hyphae was measured and bioassay of each developmental stage of B. tabaci was conducted for seven days. All of the fungal strains tested were identified as Lecanicillium spp., with strain 4078 showing the fastest mycelium growth rate (colony diameter, 16.3 $\pm$ 0.9 mm) among the strains. Compared to strain 4075, which showed the slowest growth rate, the growth rate of strain 4078 was increased almost 2-fold after seven days. Strains 4078 and Btab01 were most virulent against the egg and larva stages, respectively. The virulence of fungal strains against the adult stage was high, except for strains 41185 and 3387. Based on the growth rate of mycelium and level of virulence, strains 4078 and Btab01 were selected as the best fungal strains for application to B. tabaci, regardless of developmental stage.