• Steel and Composite Structures
• /
• 제47권2호
• /
• pp.269-287
• /
• 2023

The WGJ420 fire-resistant weathering (FRW) steel is developed and manufactured with standard yield strength of 420 MPa at room temperature, which is expected to significantly enhance the performance of steel structures with excellent fire and corrosion resistances, strong seismic capacity, high strength and ductility, good resilience and robustness. In this paper, the mechanical properties of FRW steel plates and buckling behavior of columns are investigated through tests at elevated temperatures. The stress-strain curves, mechanical properties of FRW steel such as modulus of elasticity, proof strength, tensile strength, as well as corresponding reduction factors are obtained and discussed. The recommended constitutive model based on the Ramberg-Osgood relationship, as well as the relevant formulas for mechanical properties are proposed, which provide fundamental mechanical parameters and references. A total of 12 FRW steel welded I-section columns with different slenderness ratios and buckling load ratios are tested under standard fire to understand the global buckling behavior in-depth. The influences of boundary conditions on the buckling failure modes as well as the critical temperatures are also investigated. In addition, the temperature distributions at different sections/locations of the columns are obtained. It is found that the buckling deformation curve can be divided into four stages: initial expansion stage, stable stage, compression stage and failure stage. The fire test results concluded that the residual buckling capacities of FRW steel columns are substantially higher than the conventional steel columns at elevated temperatures. Furthermore, the numerical results show good agreement with the fire test results in terms of the critical temperature and maximum axial elongation. Finally, the critical temperatures between the numerical results and various code/standard curves (GB 51249, Eurocode 3, AS 4100, BS 5950 and AISC) are compared and verified both in the buckling resistance domain and in the temperature domain. It is demonstrated that the FRW steel columns have sufficient safety redundancy for fire resistance when they are designed according to current codes or standards.

• Geomechanics and Engineering
• /
• 재33권6호
• /
• pp.597-609
• /
• 2023

The instability and failure of engineered rock masses are influenced by crack initiation and propagation. Uniaxial compression and acoustic emission (AE) experiments were conducted on cracked sandstone. The effect of the crack's dip on the crack initiation was investigated using fracture mechanics. The crack propagation was investigated based on stress-strain curves, AE multi-parameter characteristics, and failure modes. The results show that the crack initiation occurs at the tip of the pre-fabricated crack, and the crack initiation angle increases from 0° to 70° as the dip angle increases from 0° to 90°. The fracture strength k_cr is derived varies in a U-shaped pattern as β increased, and the superior crack angle β_m is between 36.2 and 36.6 and is influenced by the properties of the rock and the crack surface. Low-strength, large-scale tensile cracks form during the crack initiation in the cracked sandstone, corresponding to the start of the AE energy, the first decrease in the b-value, and a low r-value. When macroscopic surface cracks form in the cracked sandstone, high-strength, large-scale shear cracks form, resulting in a rapid increase in the AE energy, a second decrease in the b-value and an abrupt increase in the r-value. This research has significant theoretical implications for rock failure mechanisms and establishment of damage indicators in underground engineering.

• Computers and Concrete
• /
• 제31권6호
• /
• pp.513-525
• /
• 2023

This research presents the experimental and theoretical evaluations on circular steel-fiber-reinforced-concrete (SFRC) columns reinforced by glass-fiber-reinforced-polymer (GFRP) rebar under the axial compressive loading. Test programs were designed to investigate and compare the effect of different parameters on the structural behavior of columns by performing tests. Theses variables included conventional concrete (CC), fiber concrete (FC), steel/GFRP longitudinal rebars, and transversal rebars configurations. A total of 16 specimens were constructed and categorized into four groups in terms of different rebar-concrete configurations, including GFRP-rebar-reinforced-CC columns (GRCC), GFRP-rebar-reinforced-FC columns (GRFC), steel-rebar-reinforced-CC columns (SRCC) and steel-rebar- reinforced-FC columns (SRFC). Experimental observations displayed that failure modes and cracking patterns of four groups of columns were similar, especially in pre-peak branches of load-deflection curves. Although the average ultimate axial load of columns with longitudinal GFRP rebars was obtained by 17.9% less than the average ultimate axial load of columns with longitudinal steel rebars, the average axial ductility index (DI) of them was gained by 10.2% higher than their counterpart columns. Adding steel fibers (SFs) into concrete led to the increases of 7.7% and 6.7% of the axial peak load and the DI of columns than their counterpart columns with CC. The volumetric ratio had greater efficiency on peak loads and DIs of columns than the type of transversal reinforcement. A simple analytical equation was proposed to predict the axial compressive capacity of columns by considering the axial involvement of longitudinal GFRP rebars, volumetric ratio, and steel spiral/hoop rebar. There was a good correlation between test results and predictions of the proposed equation.

• Geomechanics and Engineering
• /
• 제34권5호
• /
• pp.491-505
• /
• 2023

The practical usage of underground space and demand for vehicular tunnels necessitate the construction of non-circular wide rectangular tunnels. However, constructing large tunnels in soft clayey soil conditions with no ground improvement can lead to excessive ground deformations and collapse. In recent years, in situ ground improvement techniques such as jet grouting and deep cement mixing are often utilized to perform cement-stabilisation around the tunnel boundary to prevent large deformations and failure. This paper discusses the stability characteristics and failure behaviour of a wide rectangular tunnel in cement-treated soft clays. First, the plane strain finite element model is developed and validated with the results of centrifuge model tests available in the past literature. The critical tunnel support pressures computed from the numerical study are found to be in good agreement with those of centrifuge model tests. The influence of varying strength and thickness of improved soil surround, and cover depth are studied on the stability and failure modes of a rectangular tunnel. It is observed that the failure behaviour of the tunnel in improved soil surround depends on the ratio of the strength of improved soil surround to the strength of surrounding soil, i.e., q_ui/q_us, rather than just q_ui. For low q_ui/q_us ratios,the stability increases with the cover; however, for the high strength improved soil surrounds with q_ui >> q_us, the stability decreases with the cover. The failure chart, modified stability equation, and stability chart are also proposed as preliminary design guidelines for constructing rectangular tunnels in the improved soil surrounded by soft clays.

• 대한토목학회논문집
• /
• 제28권2A호
• /
• pp.289-295
• /
• 2008

본 연구는 탄소섬유판으로 보강된 철근콘크리트 부재의 휨 거동특성 및 파괴양상을 규명하고 또한 탄소섬유판 부착탈락 거동을 규명함에 그 목적이 있다. 이를 위하여 탄소섬유판의 형상, 섬유판 부착길이, 부착면적 등의 다양한 변수를 포함하는 실험연구가 수행되었으며, 초기 부착균열이 발생되는 부착탈락 기구를 규명 하였다. 본 실험결과 탄소섬유판으로 보강된 철근콘크리트 부재의 휨 강성은 보강되지 않은 보에 비해 현저하게 개선되며 최대 극한강도 증진율은 120% 이상인 것으로 나타났다. 또한 탄소섬유판 탈락 시 측정된 탄소섬유판의 인장변형율은 탄소섬유판의 극한 변형율의 36%에 해당되는 것으로 나타났으며, 탄소섬유판의 부착길이가 충분 할수록 보는 휨 균열로 야기되는 탄소섬유판의 계면 부착탈락으로 파괴됨을 알 수 있었다. 탄소섬유판의 계면부착탈락은 휨을 받는 구역에서 시작되어 보의 양 끝단으로 급격하게 전파되는 취성적인 파괴를 유도하는 것으로 나타났다. 본 연구에서는 탄소섬유판의 유효응력에 근거하여 탄소섬유판으로 보강된 철근콘크리트 부재의 휨 강성을 계산하였으며, 이는 실험결과와 잘 일치하는 것으로 나타났다.

• Advances in concrete construction
• /
• 제14권3호
• /
• pp.195-204
• /
• 2022

As a brittle failure mode, punching-shear failure can be widely found in traditional RC slab-column connections, which may lead to the entire collapse of a flat plate structure. In this paper, a novel RC slab-column connection with inner steel truss was proposed to enhance the punching strength. In the proposed connection, steel trusses, each of which was composed of four steel angles and a series of steel strips, were pre-assembled at the periphery of the column capital and behaved as transverse reinforcements. With the aim of exploring the punching behavior of this novel RC slab-column connection, a static punching test was conducted on two full-scaled RC slab specimens, and the crack patterns, failure modes, load-deflection and load-strain responses were thoroughly analyzed to explore the contribution of the applied inner steel trusses to the overall punching behavior. The test results indicated that all the test specimens suffered the typical punching-shear failure, and the higher punching strength and initial stiffness could be found in the specimen with inner steel trusses. The numerical models of tested specimens were analyzed in ABAQUS. These models were verified by comparing the results of the tests with the results of the analyzes, and subsequently the sensitivity of the punching capacity to different parameters was studied. Based on the test results, a modified critical shear crack theory, which could take the contribution of the steel trusses into account, was put forward to predict the punching strength of this novel RC slab-column connection, and the calculated results agreed well with the test results.

• Steel and Composite Structures
• /
• 제50권1호
• /
• pp.1-13
• /
• 2024

The objective of this research is to study experimentally and numerically the behavior of steel beam columns with openings. Although the presence of openings in the beam columns is inevitable, finding ways to maintain strength is crucial. The studied parameters are opening shape, the ratio between opening height to specimen height, the percentage of opening location from support to beam column length, and web slenderness. Experimental tests are conducted including twelve specimens to study the effect of these parameters and record failure load, load deflection curve, and stress strain curve. Two failure modes are observed: local and flexural buckling. Interaction curves plotted from finite element model analysis are also used to expand the parametric study. Changing the location of the opening can decrease failure load by up to 7% and 60% in both normal and moment ratios respectively. Increasing the opening dimension can lead to a drop in the axial ratio by up to 29% and in the moment ratio by up to 74%. The weakest beam column behavior is noticed in specimens with rectangular openings which results from uneven and concentrated stresses around the opening. The main results of this research illustrate that the best location for opening is at 40% - 50% from beam column support. Also, it is advisable to use circular openings instead of rectangular openings in specimens having slender webs because moment ratios are raised by 85% accompanied by a rise in normal ratios by 9%.

• Steel and Composite Structures
• /
• 제51권3호
• /
• pp.243-260
• /
• 2024

Thirteen self-compacting recycled concrete filled aluminium tubular (SCRCFAT) columns were tested under concentric compression loads. The effects of the replacement ratio of the recycled concrete aggregate (RCA) and steel fibre (SF) reinforcement on the structural performance of the SCRCFAT columns were studied. A control specimen (C000) was cast with normal concrete without SF to be reference for comparison. Twelve columns were cast using RCA, six columns were cast using concrete incorporating 2% SF while the rest of columns were cast without SF. Failure mode, ductility, ultimate load capacity, axial deformation, ultimate strains, stress-strain response, and stiffness of the SCRCFAT columns were studied. The results showed that, the peak load of tested SCRCFAT columns incorporating 5-100 % RCA without SF reduced by 2.33-11.28 % compared to that of C000. Conversely, the peak load of tested SCRCFAT columns incorporating 5-100% RCA in addition to 2% SF increased by 21.1-40.25%, compared to C000. Consequently, the ultimate axial deformation (Δ) of column C100 (RCA=100% and SF 0%) increased by about 118.9 % compared to C000. The addition of 2% SF to the concrete mix decreased the axial deformation of SCRCFAT columns compared to those cast with 0% SF. Moreover, the stiffness of the columns cast without SF decreased as the RCA % increased. In contrast, the columns stiffness cast with 2% SF increased by 26.28-89.7 % over that of C000. Finally, a theoretical model was proposed to predict the ultimate loads tested SCRCFAT columns and the obtained theoretical results agreed well with the experimental results.

• 한국해양학회지:바다
• /
• 제20권3호
• /
• pp.141-150
• /
• 2015

와편모류는 해양의 주요 일차 생산자로서, 독립영양성, 종속영양성 및 혼합영양성 등의 다양한 영양방식을 가지는 생물군으로서 해양 미소먹이망에서 중요한 생태학적 역할을 담당하고 있다. 그러나 와편모류에 대한 대부분의 연구가 연안이나 외해의 표영생태계에 국한되어 수행되었으며, 사질조간대에 서식하는 저서성 와편모류에 대한 연구는 매우 미흡하며, 국내에서는 제주연안을 제외하고는 거의 전무하다. 본 연구는 전라북도 서해안에 위치한 동호의 사질조간대에서 2012년 11월부터 2014년 2월까지 매월 간조기에 저서성 와편모류의 출현양상을 조사하고 주요 출현종의 28S rDNA 염기서열을 획득하여 분자계통학적 분석을 실시하였다. 연구기간동안 Gymnodiniales, Gonyaulacales, Peridiniales, Prorocentrales의 4개 목에 속하는 총 13속 27종의 저서성 와편모류가 출현하였고, Amphidinium 속이 9종으로 가장 다양한 종이 출현하였다. 동호를 비롯하여 서해안에 위치한 모항, 송호, 가마미와 제주 협재에서 분리한 저서성 와편모류 총 16종, 34개 종주에서 28S rDNA 염기서열 정보를 성공적으로 확보하였으며, 분자계통학적 분석에 이용하였다. Amphidinium에 속하는 종들은 Gymodiniales 목의 4개의 분기군 가운데 3개의 분기군에 걸쳐서 분지하여, 다계통학적(polyphyletic) 특성을 나타내었다. 28S rDNA염기서열을 이용한 유전적 거리를 비교한 결과 국내에서 출현한 Amphidinium mootonorum 종주들은 캐나다에서 분리한 종주와 19.2%의 유전적 차이를 보여 종내 변이가 출현 종들 가운데 가장 큰 것으로 나타났다. 본 연구 해역에서 독성 와편모류인 Amphidinium carterae와 A. operculatum이 간헐적으로 출현하여 이들의 독성과 정량적인 모니터링이 추후에 필요하다.

• 비파괴검사학회지
• /
• 제25권5호
• /
• pp.339-342
• /
• 2005

광섬유 센서 구성을 위한 장주기 광섬유 격자(Long-Period Fiber Grating, LPFG)는 코어 모드로 진행하는 빔이 위상 정합 조건(Phase Matching Condition)에 의해 특정 파장에서 클래딩 모드와 커플링이 일어나는 광소자이다. 공진 파장과 커플링의 세기는 온도, 스트레인, 주변 굴절 지수 등에 의해 민감하게 변화하는 특성을 이용하여 광섬유 센서에 넓게 응응될 수 있다 일반적으로 광섬유 격자는 광섬유 코어를 자외선에 노출시킴으로서 굴절률의 주기적인 변화가 유도되는 원리, 즉 광민감성 (Photosensitivity)에 기초를 두고 있으며 광민감성을 가진 격자제조용 광섬유 제작은 광섬유 격자 연구에 대단히 중요한 부분이다. 이 논문에서는 보론 첨가의 양에 의한 코어와 클래딩의 굴절률 차 변화와 그것에 따른 장주기 광섬유 격자의 온도 및 구부림 특성 변화를 분석하였다. 보론의 양이 증가할수록 코어와 클래딩의 굴절률 차가 줄어드는 것$(1.69{\times}10^{-4}/SCCM)$을 실험을 통해 알 수 있었고, 그로 인해 보론의 음의 온도 의존성으로 인해 장주기 광섬유 격자의 온도 의존성이 억제됨$(0.01145nm/^{\circ}C/SCCM)$을 확인할 수 있었다. 또한, 보론의 증가로 인해 코어와 클래딩의 굴절률차가 줄어들수록 장주기 광섬유 격자는 구부림에 더 민감함을 알 수 있었다.