• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.531-554
• /
• 2006

Oral implants must fulfill certain criteria arising from special demands of function, which include biocompatibility, adequate mechanical strength, optimum soft and hard tissue integration, and transmission of functional forces to bone within physiological limits. And one of the critical elements influencing the long-term uncompromise functioning of oral implants is load distribution at the implant- bone interface, Factors that affect the load transfer at the bone-implant interface include the type of loading, material properties of the implant and prosthesis, implant geometry, surface structure, quality and quantity of the surrounding bone, and nature of the bone-implant interface. To understand the biomechanical behavior of dental implants, validation of stress and strain measurements is required. The finite element analysis (FEA) has been applied to the dental implant field to predict stress distribution patterns in the implant-bone interface by comparison of various implant designs. This method offers the advantage of solving complex structural problems by dividing them into smaller and simpler interrelated sections by using mathematical techniques. The purpose of this study was to evaluate the stresses induced around the implants in bone using FEA, A 3D FEA computer software (SOLIDWORKS 2004, DASSO SYSTEM, France) was used for the analysis of clinical simulations. Two types (external and internal) of implants of 4.1 mm diameter, 12.0 mm length were buried in 4 types of bone modeled. Vertical and oblique forces of lOON were applied on the center of the abutment, and the values of von Mises equivalent stress at the implant-bone interface were computed. The results showed that von Mises stresses at the marginal. bone were higher under oblique load than under vertical load, and the stresses were higher at the lingual marginal bone than at the buccal marginal bone under oblique load. Under vertical and oblique load, the stress in type I, II, III bone was found to be the highest at the marginal bone and the lowest at the bone around apical portions of implant. Higher stresses occurred at the top of the crestal region and lower stresses occurred near the tip of the implant with greater thickness of the cortical shell while high stresses surrounded the fixture apex for type N. The stresses in the crestal region were higher in Model 2 than in Model 1, the stresses near the tip of the implant were higher in Model 1 than Model 2, and Model 2 showed more effective stress distribution than Model.

• Pediatric Infection and Vaccine
• /
• v.8 no.2
• /
• pp.175-180
• /
• 2001

Purpose : Recently in Korea since 1998, 2TU has been used instead of 5TU, which caused a confusion in interpreting tuberculin skin tests. We compared the tuberculin skin reaction to PPD(purified protein derivatives) 1TU, 2TU and 5TU. Methods : We studied tuberculin skin reaction to PPD 1TU, 2TU and 5TU on 92 infants who were vaccinated with percutaneous multiple puncture BCG vaccine(Tokyo 172 strain, Japan BCG Laboratory Co.) in neonatal period. Diameters of indurations were measured in millimeters 48~72 hours after the intradermal injection of PPD 1TU, 2TU and 5TU. Results : Among 92 infants(male : 56, female : 36), 1TU was used on 31 infants, 2TU on 31 infants and 5TU on 30 infants for tuberculin skin test. The mean diameter of induration for PPD 1TU, 2TU and 5TU were $5.7{\pm}4.2mm$, $7.1{\pm}3.7mm$, and $9.2{\pm}4.2mm$, respectively. There was no statistical difference in mean diameter of induration between 1TU and 2TU. However, when tested with 5TU, the diameter of induration was significantly larger than those of PPD 1TU and 2TU(P<0.05). Six subjects(19.4%) tested with 1TU, 9 subjects(29%) tested with 2TU and 16 subjects(53.3%) tested with 5TU had diameter of 10 mm or more. There was no statistical difference between 1TU and 2TU but for 5TU, number of subjects with diameter of 10 mm or more was significantly higher than PPD 1TU and 2TU(P<0.05). Number of subjects with induration diameter of 5 mm or more for 1TU, 2TU and 5TU was 19(61.3%), 22(71.0%) and 26(86.7%), respectively. However, there was no statistical difference. Conclusion : A new standard criteria for interpreting the tuberculin skin test with PPD 2TU should be established for clinical diagnosis of tuberculosis.

• The Korean Journal of Malacology
• /
• v.1 no.1
• /
• pp.24-50
• /
• 1985

Five different populations of Parafossarulus manchouricus (Chongpyung, Chinju and Kunsan, Korea; and Japan and Taiwan), a population of Bitbynia (Gabbia) misella (Gongju, Korea) and two different populations of Bithynta tentaculata (Michigan, U.S.A. and Bodensee, Germany) were compared in regard to eff-laying characteristics, morphology, chromosome cytology, natural infections of parasites and ecology of habitats. A satisfactory culture method was devised for laboratory rearing of the snails. Tropical fish food (Terra SML) and powdered green leaves (Ceralife) were used as the main food sources for the snails. Benthic diatoms such as Navicula and Gomphonema from the periphyton were also essential for satisfactory growth, especially for the baby snails. The aquaria were stabilized with small stones from a local stream. Young P. manchouricus snails grew to adult size in about 54 days after hatching. They laid eggs 150-156 days after hatching. The whole cycle (birth to egg-laying) took approximately 5 months. The three species of bithyniid snails are iteroparous and lay eggs once a year. There were no major morphological differences in the shells of genera or subgenera studied here. They did exhibit the following rather minor differences. The shell of Parafossarulus has spirally raised ridges, and its apex is usually eroded; the other two genera lack these characteristics. The shell of B. (Gabbia) misella is small, nor exceeding 7.5 mm in length, while the shells of the other two species are larger, being more than 10 mm in length. Scanning electron microscopy (SEM) of the protoconch of P. manchouricus reveals nearly smooth sculpture with small, low, spiral wrinkles. This sculpture is quite different from that of the Hydrobiidae, a family to which the bithyniids are frequently assigned. Scanning electron microscopy of the radulae of the three bithyniid species showed that their radular morphologies are very similar, but there are some small differences, which may be species-specific. There were some statistical differences in shell heights between the Korean and the other populations of P. manchouricus, and between this species and the other two bithyniids as well. The shell differences between the several populations of Korean P. manchouricus may be related to environment. Edtails of the chromosome cycle of these bithyniid snails are similar to those reported for other snails. No specific differences were observed in the chromosome cycle between the various species and populations of snails employed in this study. Reporred for the first time in molluscs are two darkly stained "nucleolar organizers" during pachyterne stages of meiosis. Two different chromosome numbers were observed in the three bithyniid species: n=17 in B. tentaculata and P. manchouricus, and n=18 in B. (G.) misella. no sex chromosomes or supernumerary chromosomes were seen. There were no morphological differences in karyotypes of three Korean strains of P. manchouricus. The infection rates of cercariae of Clonorchis sinensis in Chinju and Kunsan strains of P. manchouricus were 0.14% and 1.25%, respectively. However, Clonorchis cercariae were found in Chongpyung strain of P. manchouriceu and Gongju strain of B. (G.) misella. The habitats of P. manchouricus around Jinyang Lake were relatively clean without any heavy pollution of aquatic microorganisms and organic materials during the period of this study. The levels of dissolved oxygen (D.O.) and biochemical oxygen demand (B.O.D.) of the water specimens sampled from the study areas ranged from 6.0 to 9.6 ppm and from 0.4 to 1.6 ppm, respectively. Eight metalic constituents from the water samples were also assayed, and all metalic ions detercted were remarkably low below the legal criteria. However, calcium ion in the water samples from the habitats of P. manchouricus was considerably higher than others.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 1998.10a
• /
• pp.83-106
• /
• 1998

This study was conducted to investigate the probiotics(acid and bile resistance, fermentation properties, viability, cholesterol assimilation, antimicrobial activity, antimutagenicity, and immunoactivation) of the strains of bifidobacteria isolated from healthy Koreans and to investigate the effects of oral administration of Bifidobacterium longum A-2 on the fecal microflora, ${\beta}-glucuronidase$ activity, pH values, Ammonia concentration. The experimental results are summarized as follows: The probiotics were tested for 23 strains including three commer챠al strains as controls. Compared to other strains, strains of A-2 and A-9 showed more acid resistance whereas A-2, A-5, A-13, A-14, A-18 and A-22 showed excellent bile resistances. The properties of bifidobacteria during fermentation were tested. Strains of A-1, A-2, A-3, A-4, A-6, and A-23 resulted in less than pH 4.5 and titratable acidity over 0.90 after 24 hr of fermentation. When the strains of A-2 was grown with glucose, maltose, and fructooligosaccharide, the acetic acid production were higher than with sorbitol and mannitol. The storage stability of the strains of A-2 and A-22 were tesed, indicating the strain A-2 was more stable over 10 days of storage at both $4^{\circ}C$ and $20^{\circ}C$ than A-22. The strains of A-8, A-10, A-11, A-12 and A-20 assimilated more than 30% of cholesterol included in the media. The strains of A-1 and A-2 showed antimicrobial activity against Sta. aureus. The antimutagenicity of the strains were also tested, showing that the mutation was suppressed more by three strains(A-2, A-12, and A-23). In addition, strain A-5 improved immunological activity(phagocytosis, $TNF-{\alpha}$, IL-6) more than other strains. In the effects of oral administration of Bif. longum A-2, the number of fecal bifidobacteria was siginificantly increased(p<0.01) and the level of fecal ${\beta}-glucuronidase$ also was siginificantly reduced(p<0.05). However there were no siginificant differences in the level of Lαctobacilli, Enterobacteriaceae, Clostridium perfringens, pH and ammonia by the administration. The results suggested that Bif. longum A-2 may be met the criteria for probiotics culture.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.2
• /
• pp.118-126
• /
• 2002

To evaluate the correlations of microbial populations with soil healthiness and crop production and establish the criteria for microbial population of soil types. We analyzed the microbial community structure of 13 soils which were different in physical and chemical properties and cultivation methods. According to the analysis of microbial population suing the dilution plate method, the large differences of the microbial population structures among soil types were shown: aerobic bacteria $2-27{\times}10^6$, fluorescent Pseudomonas $1-1,364{\times}10^5$, Gram negative bacteria $1-126{\times}10^4$, and mesophilic Bacillus $1-110{\times}10^5$. The density of Gram negative bacteria was highest on red pepper cultivating soils (sample no. 4 and 6) of Umsung and Gesan, Chungbuk, and the density of the fluorescent Pseudomonas was highest on greenhouse soil (sample no. 7) of Jinju, Kyungnam. The crop productivity of three soils was high as compared with those of other soils. It was supposed that the density of fluorescent Pseudomonas and mesophilic Bacillus were correlated with the incresed crop production. By MIDI analysis, 579 strains isolated from 13 soils composed of a variety of microbes including 102 isolates of Agrobacterium, 112 isolates of Bacillus, 32 isolates of Pseudomonas, 44 isolates of Kocuria, and 34 isolates of Pseudomonas. Among the 624 isolates of Gram negative bacteria, Pseudomonas including P. putida and p. fluorescens occupied the highest density (51%), and Stenotrophomonas maltophilia and Burkholderia cepacia also appeared at high density. From RAPD analysis, the fluorescent Pseudomonas strains isolated from 13 soil types showed a high level of strain diversities and were grouped into 2 - 14 patterns according to soil types. Many of unknown bacteria were recovered from the paddy soil, and needed to be further characterized on the molecular basis.

• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.250-257
• /
• 1997

Stem diameter and shoot fresh weight of tomato grown in greenhouse were measured non-destructively at 10 minutes interval from 1 to 16 July, 1996 with displacement detector using strain gauges and with suspension-type load cell, respectively, and simultaneously were measured soil water potential, transpiration and solar radiation. Ample water was irrigated before experiment, and thereafter, irrigations were made on the next morning when visual symptoms of wilting appeared. Shoot fresh weight and stem diameter showed very similar patterns in diurnal changes which are characterized by predawn maximum and afternoon minimum and in long- term evolutions, suggesting that stem diameter shrinkage and expansion are closely related to plant water content and growth, respectively, Shoot weight and stem diameter reached minimum values a little later than the time on which transpiration showed maximum. The daily net gains of fresh weight(DG) and stem diameter(DI) showed significantly Positive correlations with solar radiation in those days on which plants were not water-stressed. However, Dl and DG on those days of water stress showed much lower values than expected from the relationships between solar radiation and them. Transpiration was much lower than the expected potential transpiration on 10 July, implying that plants were water-stressed. In this case water stress was not detected from visual symptom of wilting and/or soil water potential, but was able to be identified by the lower DI and DG than the expected. The maximum contraction of stem diameter(MC) and the maximum loss of fresh weight(ML) during daytime showed significantly positive correlations with solar radiation in those days on which plants were not water-stressed and were observed greater than expected from the relationships on severely water-stressed days. But mild water stress could not be discernable by ML and MC. It would be concluded that the daily net gains of fresh weight and/or stem diameter could be used as criteria for diagnosing the water status of tomato and for triggoring the onset of irrigation in automatic system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.39-55
• /
• 1992

In this research, a Three Level Decomposition technique has been developed for configuration design optimization of truss structures. In the first level, as design variables, behavior variables are used and the strain energy has been treated as the cost function to be maximized so that the truss structure can absorb maximum energy. For design constraint of the optimal design problem, allowable stress, buckling stress, and displacement under multi-loading conditions are considered. In the second level, design problem is formulated using the cross-sectional area as the design variable and the weight of the truss structure as the cost function. As for the design constraint, the equilibrium equation with the optimal displacement obtained in the first level is used. In the third level, the nodal point coordinates of the truss structure are used as coordinating variable and the weight has been taken as the cost function. An advantage of the Three Level Decomposition technique is that the first and second level design problems are simple because they are linear programming problems. Moreover, the method is efficient because it is not necessary to carry out time consuming structural analysis and techniques for sensitivity analysis during the design optimization process. By treating the nodal point coordinates as design variables, the third level becomes unconstrained optimal design problems which is easier to solve. Moreover, by using different convergence criteria at each level of design problem, improved convergence can be obtained. The proposed technique has been tested using four different truss structures to yield almost identical optimum designs in the literature with efficient convergence rate regardless of constraint types and configuration of truss structures.

• Korean Journal of Poultry Science
• /
• v.12 no.2
• /
• pp.127-134
• /
• 1985

Battery trial with 240 broiler chicks of Hubbard strain was conducted for a period of 2 weeks in order to compare the anticoccidical efficacy of polyether ionophorous antibiotics ; Maduramicin ammonium, Monensin and Salinomyc in sodium. The criteria used in these anticoccidial efficacy studies were anticoccidial index, growth rate, feed efficiency, mortality, lesion score and the number of oocysts produced after artificial inoculation with 70,000 sporulated oocysts of Eimeria tenella(90%) and E.necatrix (10%) to each bird. The result obtained are summarized as follow: 1. All groups medicated anticoccidial feed additives improved body weight gain and feed efficiency. However, it was found that the group medicated with Maduramicin showed better body weight gain (352.5 and 648.8 g) and feed efficiency(1.603 and 1.680) during the first and the second week experiments, 2. The mortality rate(4.2%) and lesion scores (1.72) of Maduramicin medicated group, from artificial coccidiosis were comparatively lower than those of other two medicated groups, 3. It was also found that oocyst output (0.25 ${\times}$ 10$^4$) in Maduramicin medicated group were lower than those of other two groups. 4. Anticoccidial indexes during the first week were 177.9 in Maduramicin medica-group, 158.7 in Salinomycin medicated group, 141.6 in Monensin medicated group and 78.0 in infected, nonmedicated group as compared with 200.0 in noninfected, nonmedicated group (NNC) 5. Anticoccidial indexes during the second week were 201.1 in Maduramicin group 184.0 in infected, nonmedicated group as compared with 200.0 in noninfected, nonmedicated group (NNC).

• Childhood Kidney Diseases
• /
• v.10 no.1
• /
• pp.18-26
• /
• 2006

Purpose : Empirical antimicrobial treatment is indicated before bacteriological results are available for young children with febrile UTI to minimize renal scarring. To ensure appropriate therapy, knowledge of the prevalence of causative organisms and their susceptibility patterns to antimicrobials is mandatory. We performed a retrospective analysis investigating the local prevalence and resistance patterns of uropathogens, primarily E. coli, isolated from community-acquired UTIs. Methods : A total of 103 positive urine cultures from children with febrile UTI collected at Bundang CHA General Hospital from February 2004 to February 2005 were analyzed. Inclusion criteria were fever higher than $37.5^{\circ}C$, significant bacteriuria with single strain growth of at least 10s colony forming units/mL urine, and leukocyturia >5/HPF. Results : E. coli(89.3%) was the leading uropathogen followed by Enterococcus spp.(3.9%) Klebsiella spp.(2.9%), Citrobctcter spp.(1.9%) and Enterobacter spp.(1.9%). E. coli strains revealed a low proportion of antimicrobial susceptibility to ampicillin(AMP; 27.2%) ampicillinsulbactam(AMS; 34.8%) and trimethoprim-sulfamethoxazole(SXT; 65.2%). Susceptibility patterns to cephalosporins were as follows; cefazolin(1st generation; 91.3%), cefoxitin(2nd; 100%), ceftriaxone(3rd; 97.8%) and cefepime(4th; 97.8%). Three E. coli isolates produced ex tended - spectrum beta-lactamase(ESBL). Conclusion : Empirical treatment with AMP, AMS and SXT, which are commonly used in pediatric clinics, is not recommended for childhood UTI due to high incidence of resistance. The high level of susceptibility to cephalosporins makes these drugs reasonable alternatives. However the emergence of ESBL-producers, even though they are quite few, may have an impact on cephalosporin treatment in the future. (J Korean Soc Pediatr Nephrol 2006;10:18-26)