• 한국소음진동공학회논문집
• /
• 제17권7호
• /
• pp.572-578
• /
• 2007

Two stroke low speed diesel engines are widely used for marine propulsion or as power plant prime mover. These engines have many merits which includes higher thermal efficiency, mobility and durability. Yet various annoying vibrations occur sometimes in ships or at the plant itself. Of these vibrations, torsional vibration is very important and dictates a careful investigation during the engme's initial design stage for safe operation. With the rule and limit on torsional vibration in place, shaft strength fatigue due to torsional vibration however demands further analysis which possibly can be incorporated in the classification societies' rule and limit. In addition, the shaft's torsional vibration stresses can be calculated equivalently from accumulated fatigue cycles number due to transient torsional vibration in time domain. In this paper, authors suggest a new estimation method combined with Palmgren-Miner equation. A 6S70MC-C ($25,320ps{\times}91rpm$) engine for ship propulsion was selected as a case study. Angular velocity was measured, instead of shaft's strain, for simplified measurement and it was converted to torsional vibration stress for accumulated fatigue cycle numbers in shafting life time. Likewise, the accumulated fatigue calculation was compared with shaft fatigue strength limit. This new method can be further realized and confirmed in ship with two stroke low speed diesel engine.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.317-320
• /
• 2008

본 연구는 최근 건축물의 대형화 다양화 되어감에 따라 초고강도 콘크리트에 대한 높은 관심과 연구가 활발하게 이루어지고 있는 상황에서 국내에서도 200MP급 이상의 초고강도 콘크리트가 개발 되었고, 150MPa의 초고강도 콘크리트의 실용화 연구가 진행되고 있는 상황이다. 하지만, 100MPa급 이상의 초고강도 콘크리트는 물-결합재비가 낮기 때문에 점성이 높아 기존의 슬럼프 실험만으로는 유동성을 평가하기에는 부족하기 때문에 레올로지(rheology)를 이용한 평가와 O-lot, V-funnel 실험 평가를 하여 상관 관계를 밝힘으로써 100MPa급 이상의 초고강도 콘크리트의 실용화를 위한 기본 정보를 제공하는데 그 목적을 두었다. 실험 결과, Yield stress과 slump flow, V-funnel는 높은 상관관계가 있음을 알 수 있었고, plastic viscosity도 O-lot시간과 V-funnel시간과 높은 상관관계가 있음을 알 수 있었다.

• 한국가금학회지
• /
• 제27권3호
• /
• pp.235-242
• /
• 2000

A feeding trial was carried out effect of supplemental Lactobacillus on productivity, egg quality and intestinal microflora in 320 21 weeks - old laying hens for 12 week. Supplemented Lactobacillus strains were Lactobacillus amylovorus LLA7(LA), Lactobacillus crispatus LLA9(LC) and Lactobacillus vaginalis LLA11(LV). Three strains mixed to basal diet which containing 2,800㎉/kg ME, 16% CP with none, LA, LC, LV, LA+LC, LA+LV, LC+LV and LC+LC+LV. Supplemental level was 10(sup)7 cfu/g diet. Egg production was tended to increase with adding Lactobacilus, but not difference significantly. Average egg weight was heavier in adding Lactobacillrs compared to the none, and heaviest in LA+LV, LC+LV(P〈0.05). In periodic observation, the gap of egg weight with adding Lactobacillus or not was severe persisting laying periods. The diet containg MC or LV was better than LA, which means the difference by Lactobacillus strains for egg weight. Daily egg mass also increased in adding Lactobacillus about 1.1 to 2.3 g/hen, but not difference significantly. Feed intake and feed conversion were not difference regardless Lactobacillus strains and laying periods. Haugh unit improved with adding Lactobacillus. Cecal Lactobacillus spp. was increased with adding Lactobacillus(P〈0.05), didn't observed E. coli depression. In summary, supplemental Lactobacillus could improve for egg production, egg weight, egg mass and egg white. And those of effect expect much beneficial with mixing Lactobacillus which established well as single strain.

• Journal of Microbiology
• /
• 제34권4호
• /
• pp.320-326
• /
• 1996

To analyze the effects of host versus plasmid on survival of 2, 4-degrading bacteria in environmental samples, strains Pseudomonas cepacia/pJP4, Alcaligenes JMP228/pJP4, P. cepacia/p712, and Alcaligenes JMP228/p712 were separately inoculated into samples of field soil, paddy soil, lake water, and river water, and then the changes of their populations were measured. The strains used contained a 2, 4-D degradative plasmid, either pJP4 conferring fast-growing property to the host or p712 conferring slow-growing property, and were resistant to antibiotics such that the inoculated strains could be enumerated against the indigenous microbial populations. In sterile environmental samples, these strains were stably maintained at the levels used for inoculation, except in sterile paddy soil where Alcaligenes JMP228 strains died drapidly. In natural soil samples for four strains declined steadily with time, but in naturla water samples their polulations fell rapidly at the early phase and then remained almost constant. When the environmentla samples were treated with 2, 4-D, P. cepacia/pJP4 and P. cepacia/p712 maintained significant numbers, while Alcaligenes JMP228/pJP4 and Alcaligenes JMP228/p712 declined significantly in most of the samples. The results indicated that the survivability of genetically modified microorganisms could vary depending on the environments and that their abundance in the environments under s2, 4-D selection was markedly influenced by the nature of the 2, 4-D degradative plasmid as well as type of the host strain.

• IMMUNE NETWORK
• /
• 제14권6호
• /
• pp.307-320
• /
• 2014

Mycobacterium scrofulaceum is an environmental and slow-growing atypical mycobacterium. Emerging evidence suggests that M. scrofulaceum infection is associated with cervical lymphadenitis in children and pulmonary or systemic infections in immunocompromised adults. However, the nature of host innate immune responses to M. scrofulaceum remains unclear. In this study, we examined the innate immune responses in murine bone marrow-derived macrophages (BMDMs) infected with different M. scrofulaceum strains including ATCC type strains and two clinically isolated strains (rough and smooth types). All three strains resulted in the production of proinflammatory cytokines in BMDMs mediated through toll-like receptor-2 and the adaptor MyD88. Activation of MAPKs (extracellular signal-regulated kinase 1/2, and p38, and c-Jun N-terminal kinase) and nuclear receptor (NF)-${\kappa}B$ together with intracellular reactive oxygen species generation were required for the expression of proinflammatory cytokines in BMDMs. In addition, the rough morphotypes of M. scrofulaceum clinical strains induced higher levels of proinflammatory cytokines, MAPK and NF-${\kappa}B$ activation, and ROS production than other strains. When mice were infected with different M. scrofulaceum strains, those infected with the rough strain showed the greatest hepatosplenomegaly, granulomatous lesions, and immune cell infiltration in the lungs. Notably, the bacterial load was higher in mice infected with rough colonies than in mice infected with ATCC or smooth strains. Collectively, these data indicate that rough M. scrofulaceum induces higher inflammatory responses and virulence than ATCC or smooth strains.

• Geomechanics and Engineering
• /
• 제29권3호
• /
• pp.311-320
• /
• 2022

TBM concrete segment requires a higher level of material properties compared to general concrete structures due to difficulties in maintenance and uncertainty in ground conditions. In this regard, recently, as one of the methods to achieve enhancement effect on concrete strength, many researchers have been focusing on adding CNTs to concrete mixture. However, even CNTs do not compensate the weakness that concrete exhibits brittle behavior after cracking. Separately, over the past few decades, a number of studies have been conducted on fiber reinforced concrete which exhibits ductile behavior due to fibers bridging cracks. However, only limited studies have been conducted to employ the advantages of the both materials together. In this study, an experimental program has been conducted to investigate the effect of CNTs on the workability and the compressive behavior of PVA-ECC which exhibits ductile tensile behavior with well-distributed cracks even without a conventional rebar. In addition to the compression test, SEM analysis has been also conducted for detailed investigation in the microstructure. The variable was the CNTs mix ratio, which were set to 0.00, 0.25, and 0.50 wt.% to the binding materials. It was observed though the test results that as the CNTs mix ratio increased, the workability considerably decreased with the reduced slump and slump flow. From the compression test results, it was also investigated that the compressive behavior was improved since the compressive strength, the strain corresponding to the compressive strength, and the modulus of elasticity increased with an increase of CNTs mix ratio. The contents of this paper will be useful for relevant research areas such as fiber reinforced concrete with CNTs which might be applied for high performance TMB concrete segments.

• 소성∙가공
• /
• 제32권6호
• /
• pp.311-320
• /
• 2023

Recently, lightweight of automotive parts has been required to solve environmental problems caused by global warming. Accordingly, research and development are proceeded on manufacturing of parts using aluminum that can replace steel for lightweight of the automotive parts. In addition, high strength aluminum can be applied to body parts in order to meet both requirements of lightening and improving crash safety of vehicle. In this study, hot blow forming of roof side rail is employed to manufacturing of the automotive parts with high strength aluminum tube. In hot blow forming, longer forming times and excessive thinning can be occurred as compared with conventional manufacturing processes. So optimization of process conditions is required to prevent excessive thinning and to uniformize thickness distribution with fast forming time. Mechanical properties of high strength aluminum are obtained from tensile test at high temperature. These properties are used for finite element(FE) analysis to investigate the effect of strain rate on thinning and thickness distribution. Variation of thickness was firstly investigated from the result of FE analysis according to tube diameter, where the shapes at cross section of roof side rail are compared with allowable dimensional tolerance. Effective tube diameter is determined when fracture and wrinkle are not occurred during hot blow forming. Also FE analysis with various pressure-time profiles is performed to investigate the their effects on thinning and thickness distribution which is quantitatively verified with thinning factor. As a results, optimal process conditions can be determined for the manufacturing of roof side rail using high strength aluminum.

• 농업과학연구
• /
• 제11권1호
• /
• pp.160-175
• /
• 1984

로우터리 경운(耕耘)날의 회전속도(回轉速度) 및 작업속도(作業速度)가 경운소요(耕耘所要)토오크에 미치는 영향을 분석(分析)하기 위(爲)하여, 형상각(形狀角) ${\theta}=30^{\circ}$, $40^{\circ}$인 2종(種)의 경운(耕耘)날로 로우터리축(軸)을 204, 243, 285, 360rpm 4단계로, 전진속도(前進速度)는 29.40cm/s, 46.93cm/s로 변화(變化)시키면서 인공토양조(人工土壤槽)에서 dynamic strain gage system을 이용(利用)하여 경운소요(耕耘所要)토오크를 측정분석(測定分析)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 경운(耕耘)날의 회전속도(回轉速度) 및 전진속도(前進速度)는 경운소요(耕耘所要)토오크에 교호작용(交互作用)으로 영향(影響)을 미치는 것으로 분석(分析)되었으며, response surface analysis를 통(通)하여 분석(分析)한 수학적(數學的)인 모형(模型)은 다음과 같다. $$T=a_0+a_1V+a_2R+a_3VR+a_4VR^2$$ 여기서 T=경운소요(耕耘所要)토오크 (kg-m) $a_0$=당(當)수(數) $a_1,\;a_2,\;a_3,\;a_4$= 계(係)수(數) V=경운장치(耕耘裝置)의 전진속도(前進速度) (cm/s) R=경운(耕耘)날의 회전속도(回轉速度) (rpm) 2. 최대경운소요(最大耕耘所要)토오크는 로우터리날 회전속도(回轉速度)가 증가(增加)함에 따라 ${\frac{{\partial}T}{{\partial}V}}$는 증가(增加)하였으며, 200~220rpm에서 증가율(增加率)이 최저(最低)가 되었고, 같은 조건(條件)에서 ${\frac{{\partial}T}{{\partial}R}}$은 감소(減少)하는 경향(傾向)이었으며, 전진속도(前進速度)가 증가(增加)함에 따라 감소율(減少率)은 증가(增加)되었다. 3. 평균경운소요(平均耕耘所要)토오크는 회전속도(回轉速度)가 320~360rpm에서 ${\frac{{\partial}T}{{\partial}R}}$의 變化가 적었으며, ${\frac{{\partial}T}{{\partial}R}}$은 회전속도(回轉速度)가 증가(增加)함에 따라 감소율(減少率)이 증가(增加)되었다. 4. 전진속도(前進速度)에 대(對)한 토양(土壤)의 단위체적당(單位體積當) 평균경운소요(平均耕耘所要)토오크의 변화율(變化率)${\frac{{\partial}T}{{\partial}R}}$는 270~300rpm에서 최저(最低)가 되었으며, ${\frac{{\partial}T}{{\partial}R}}$은 V=29.40cm/s와 V=46.93cm/s일때 변화율(變化率)이 280~290rpm에서 교착(交錯)하였다. 5. 로우터리날의 형상각(形狀角)이 증가(增加)함에 따라 순경운소요동력(純耕耘所要動力)은 증가(增加)하였다. 그러나 실제(實際) 이용면(利用面)에서는 형상각(形狀角)이 작으면 로우터리날에 검불이 감기게 되므로 소요동력(所要動力)이 크게 증가(增加)함을 보여주는 연구결과도 있다. 그러므로 형상각(形狀角) 변화(變化)에 대(對)해서는 계속 연구(硏究)되어야 할 과제(課題)라 인정(認定)된다.

• 한국식품영양과학회지
• /
• 제41권3호
• /
• pp.320-326
• /
• 2012

본 연구에서는 홍삼분말과 커피분말의 혼합비율에 따른 추출물에서의 항균효과와 항산화성을 알아보기 위해 물과 에탄올로 추출하여 그람 음성균 3종과 그람 양성균 3종 및 진균 1종에 대한 항균활성 및 항산화력을 측정하였다. 각각의 추출물을 이용하여 항균 효과를 측정한 결과 열수 추출물은 모든 균주에서 항균활성을 보였으나 비교적으로 약한 항균효과를 보였고, 에탄올 추출물은 그람음성 균주 E. coli와 진균인 C. albicans 2종에서는 항균효과를 보이지 않았지만 나머지 균주에서는 열수 추출보다 우수한 항균효과를 보였다. B. cereus 균주에서는 모든 샘플에서 항균효과가 나타났고, ES2 샘플은 P. aeruginosa와 S. Typhimurium 균주에서 각각 19 및 20 mm의 clear zone을 형성하였고, 0.25 및 0.125 mg/mL의 농도로 MIC를 나타내어 가장 우수한 항균효과를 보였다. 또한 항균성을 보인 대부분의 시료에서 0.5~1.0 mg/mL의 MIC 농도를 나타내었다. 그리고 DPPH 자유기 소거효과를 이용한 항산화력 측정에서는 열수 추출물에서 55.38~60.01%, 에탄올 추출물에서 59.37~70.50%로 AA보다는 약하지만 BHT의 결과와 비슷하여 비교적 높은 자유기 소거효과를 보였다. 총 폴리페놀화합물 함량은 열수 추출물에서 93.57~109.18 mg/g으로 커피와 홍삼의 혼합비율이 9:1일때 가장 높은 함량을 보였고, 에탄올 추출물에서는 105.16~119.79 mg/g으로 혼합비율이 7:3일 때 가장 높은 함량을 보였다. 열수 추출물과 에탄올 추출물의 총 페놀화합물의 함량을 비교하였을 때, 대체로 에탄올 추출물에서 총 페놀화합물 함량이 높은 경향을 보였다. 혼합 비율에 따라 각 시료의 항균 효과와 항산화력 역시 변화를 보였다. 따라서 홍삼의 일반 식품 이용가능성으로 커피와의 함량 조절로 커피의 항균효과와 항산화력을 변화시킬 수 있다는 가능성을 알 수 있었다. 이 연구를 바탕으로 추후 특정 생리활성물질의 분석과 생리활성기능을 연관 지어 연구를 진행한다면 기존의 기호음료로서의 커피에서 기능성 음료로서의 커피로 발전할 수 있을 것으로 기대된다.

• 한국토양비료학회지
• /
• 제22권1호
• /
• pp.72-77
• /
• 1989

우수(優秀) 질소고정균주(窒素固定菌株)를 개발(開發)하여 척박(瘠薄)한 야산(野山) 개발지(開發地)에서 효율적(效率的)인 초지조성(草地造成)을 꾀하고자, 기존(旣存) 알팔파 목야지(牧野地)에서 분리(分離)한 근류균(根瘤菌)으로부터 기내(器內) 내산성(耐酸性) 균주(菌株) 탐색(探索)과 토양(土壤)에서 선발균주(選拔菌株)의 내산성(耐酸性) 발현(發現)을 조사(調査)한 결과(結果)는 다음과 같았다. 1. pH 5.0의 시험관배지(試驗管培地)에서 근류형성(根瘤形成)을 보인 균주(菌株)는 "YA03"과 "YA09"였으며 공생효과면(共生效果面)에서 "YA03"이 우수(優秀)하였다. 2. "YA03"균주(菌株) 접종(接種)에 의(依)한 알팔파 생육(生育)과 질소(窒素) 고정력(固定力)은 무비(無肥)에서 뿐만 아니라 요소(尿素) 1.25mM 농도(濃度)에서 타균주(他菌株)보다 좋았다. 3. 알팔파 생육(生育)에 대(對)한 질소수준별(窒素水準別) "YA03" 균주(菌株)의 알팔파 접종효과(接種效果)는 접종(接種)+요소(尿素) 1.25mM > 접종(接種)+요소(尿素) > 무시용(無施用) > 무접종(無接種)+요소(尿素) 2.5mM 순(順)으로서 근류균(根瘤菌) 접종(接種)과 함께 요소(尿素)를 여용(旅用)하는 것이 효과적(效果的)이었다. 4. pH 5.0인 산성척박지(酸性瘠薄地)에서 알팔파에 대(對)한 R. meliloti "YA03" 균주(菌株) 접종(接種)은 무접종(無接種)보다 320%, pH 7.5의 비옥(肥沃)한 토양(土壤)에서 무접종(無接種) 재배(栽培)보다는 31% 건물중(乾物重) 증가(增加)를 보이므로써 내산성(耐酸性)이 큰 R. meliloti 균주(菌株)로 "YA03"를 선발(選拔)하였다.