Browse > Article
http://dx.doi.org/10.12989/gae.2022.29.3.311

Workability and compressive behavior of PVA-ECC with CNTs  

Lee, Dongmin (Department of Civil Engineering, Kyungpook National University)
Lee, Seong-Cheol (Department of Civil Engineering, Kyungpook National University)
Yoo, Sung-Won (Department of Civil and Environmental Engineering, Gachon University)
Publication Information
Geomechanics and Engineering / v.29, no.3, 2022 , pp. 311-320 More about this Journal
Abstract
TBM concrete segment requires a higher level of material properties compared to general concrete structures due to difficulties in maintenance and uncertainty in ground conditions. In this regard, recently, as one of the methods to achieve enhancement effect on concrete strength, many researchers have been focusing on adding CNTs to concrete mixture. However, even CNTs do not compensate the weakness that concrete exhibits brittle behavior after cracking. Separately, over the past few decades, a number of studies have been conducted on fiber reinforced concrete which exhibits ductile behavior due to fibers bridging cracks. However, only limited studies have been conducted to employ the advantages of the both materials together. In this study, an experimental program has been conducted to investigate the effect of CNTs on the workability and the compressive behavior of PVA-ECC which exhibits ductile tensile behavior with well-distributed cracks even without a conventional rebar. In addition to the compression test, SEM analysis has been also conducted for detailed investigation in the microstructure. The variable was the CNTs mix ratio, which were set to 0.00, 0.25, and 0.50 wt.% to the binding materials. It was observed though the test results that as the CNTs mix ratio increased, the workability considerably decreased with the reduced slump and slump flow. From the compression test results, it was also investigated that the compressive behavior was improved since the compressive strength, the strain corresponding to the compressive strength, and the modulus of elasticity increased with an increase of CNTs mix ratio. The contents of this paper will be useful for relevant research areas such as fiber reinforced concrete with CNTs which might be applied for high performance TMB concrete segments.
Keywords
cementitious composites; CNTs; compressive behavior; PVA fibers; SEM analysis;
Citations & Related Records
Times Cited By KSCI : 9  (Citation Analysis)
연도 인용수 순위
1 Camacho M. del C., Galao, O., Baeza F., Zornoza E. and Garces, P. (2014), "Mechanical properties and durability of CNT cement composites", Materials, 7(3), 1640-1651. https://doi.org/10.3390/ma7031640   DOI
2 ASTM C469-02 (2002), Standard specification for testing method for static modulus of elasticity and poison's ratio of concrete in compression. 2002 Annual Book of ASTM Standards, American Society for Testing and Material, Philadelphia, Pennsylvania.
3 Bera, A.K. and Chakraborty, S. (2015), "Compaction and unconfined compressive strength of sand modified by class F fly ash", Geomech. Eng., 9(2), 261-273. https://doi.org/10.12989/gae.2015.9.2.261.   DOI
4 Li, G.Y., Wang, P.M. and Zhao, X. (2005), "Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes", Carbon, 43(6), 1239-1245. https://doi.org/10.1016/j.carbon.2004.12.017.   DOI
5 Magalhaes, M. da S., Toledo Filho, R.D. and Fairbairn, E. de M.R. (2015), "Thermal stability of PVA fiber strain hardening cement-based composites", Constr. Build. Mater., 94, 437-447. https://doi.org/10.1016/j.conbuildmat.2015.07.039.   DOI
6 Hognestad E. (1951), "A study of combined bending and axial load in reinforced concrete members", Bulletin Series No. 399, Engineering Experiment Station, Urbana, USA, University of Illinois.
7 Isfahani, F.T., Li, W. and Redaelli, E. (2016), "Dispersion of multi-walled carbon nanotubes and its effects on the properties of cement composites", Cement Concrete Compos., 74, 154-163. https://doi.org/10.1016/j.cemconcomp.2016.09.007.   DOI
8 Karabash, Z. and Cabalar, A.F. (2015), "Effect of tire crumb and cement addition on triaxial shear behavior of sandy soils", Geomech. Eng., 8(1), 1-15. http://dx.doi.org/10.12989/gae.2015.8.1.001.   DOI
9 Lee, D.K., Lee, K.C., Lee, C.D. and Shin, K.J. (2019), "Study on ECC tensile behavior due to constrained drying shrinkage", J. Korean Recycled Constr. Resour. Inst., 7(4), 367-374. https://doi.org/10.14190/JRCR.2019.7.4.367.   DOI
10 Lee, S.C., Cho, J.Y. and Vecchio, F.J. (2013a), "Tension-stiffening model for steel fiber-reinforced concrete containing conventional reinforcement", ACI Struct. J., 110(4), 639-648.
11 Lee, S.C., Kim, J.H., Cho, J.Y. and Shin, K.J. (2010), "Tension stiffening of reinforced high performance fiber reinforced cementitious composites (HPFRCC)", J. Korea Concrete Institute, 22(6), 859-866. https://doi.org/10.4334/jkci.2010.22.6.859.   DOI
12 Lee, S.C., Oh, J.H. and Cho, J.Y. (2015), "Compressive behavior of fiber-reinforced concrete with end-hooked steel fibers", Materials, 8(4), 1442-1458. https://doi.org/10.3390/ma8041442.   DOI
13 Li, G.Y., Wang, P.M. and Zhao, X. (2007), "Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites", Cement Concrete Compos., 29(5), 377-382. https://doi.org/10.1016/j.cemconcomp.2006.12.011.   DOI
14 Musso, S., Tulliani, J.M., Ferro, G. and Tagliaferro, A. (2009), "Influence of carbon nanotubes structure on the mechanical behavior of cement composites", Compos. Sci. Technol., 69(11-12), 1985-1990. https://doi.org/10.1016/j.compscitech.2009.05.002.   DOI
15 Lim, T.Y., Paramasivam, P. and Lee, S.L. (1987), "Analytical model for tensile behavior of steel-fiber concrete", ACI Mater. J., 84(4), 286-298.
16 Marti, P., Pfyl, T., Sigrist, V. and Ulaga, T. (1999), "Harmonized test procedures for steel fiber-reinforced concrete", ACI Mater. J., 96(6), 676-686.
17 Meda, A., Rinaldi, Z., Spagnuolo, S., De Rivaz, B. and Giamundo, N. (2019), "Hybrid precast tunnel segments in fiber reinforced concrete with glass fiber reinforced bars", Tunn. Undergr. Sp. Tech., 86, 100-112. https://doi.org/10.1016/j.tust.2019.01.016.   DOI
18 Na, C. and Kwak, H.G. (2011), "A numerical tension-stiffening model for ultra high strength fiber-reinforced concrete beams", Comput. Concrete, 8(1), 1-22.   DOI
19 Park, S.H., Sim, Y., Lee, W., Cho, S.K., Lee, D., Lee, S.C. and Yoo, S.W. (2021), "Material behavior of PVA cementitious composites with CNTs according to the mixing order", Proceedings of KSCE convention.
20 Shin, K.J., Kim, J.H., Cho, J.Y. and Lee, S.C. (2011), "Flexural behavior of high performance fiber reinforced cementitious composites (HPFRCC) beam with a reinforcing bar", J. Korea Concrete Inst., 23(2), 169-176. https://doi.org/10.4334/jkci.2011.23.2.169.   DOI
21 Shi, B. and Kong, X. (2016), "Study of the diseases of shield tunnels and its reasons", Geo-China, 2016, 40-45. https://doi.org/10.1061/9780784480038.006   DOI
22 Popovices, S. (1973), "A numerical Approach to the complete stress-strain curve of concrete", Cement Concrete Res., 3(5), 583-599.   DOI
23 Rousakis, T.C., Kouravelou, K.B. and Karachalios, T.K. (2014), "Effects of carbon nanotube enrichment of epoxy resins on hybrid FRP-FR confinement of concrete", Compos. Part B: Eng., 57, 210-218. https://doi.org/10.1016/j.compositesb.2013.09.044.   DOI
24 Ruoff, R.S. and Lorents, D.C. (1995), "Mechanical and thermal properties of carbon nanotubes", Carbon, 33(7), 925-930. https://doi.org/10.1016/0008-6223(95)00021-5.   DOI
25 Voo, J.Y.L. and Foster, S.J. (2003), "Variable engagement model for fibre reinforced concrete in tension", Uniciv Report No. R-420, University of New South Wales, School of Civil and Environmental Engineering, 86.
26 Shooshpasha, I. and Shirvani, R.A. (2015), "Effect of cement stabilization on geotechnical properties of sandy soils", Geomech. Eng., 8(1), 17-31. http://doi.org/10.12989/gae.2015.8.1.017.   DOI
27 Silvestro, L. and Jean Paul Gleize, P. (2020), "Effect of carbon nanotubes on compressive, flexural and tensile strengths of Portland cement-based materials: A systematic literature review", Constr. Build. Mater., 264, 120237. https://doi.org/10.1016/j.conbuildmat.2020.120237.   DOI
28 Tanaka, K., Sato, T., Yamabe, T., Okahara, K., Uchida, K., Yumura, M. and Ikazaki, F. (1994), "Electronic properties of carbon nanotube", Chem. Phys. Lett., 223(1-2), 65-68. https://doi.org/10.1016/0009-2614(94)00421-8.   DOI
29 Collins, F., Lambert, J. and Duan, W.H. (2012), "The influences of admixtures on the dispersion, workability, and strength of carbon nanotube-OPC paste mixtures", Cement Concrete Compos., 34(2), 201-207. https://doi.org/10.1016/j.cemconcomp.2011.09.013.   DOI
30 Yan, Z., Zhu, H. and Ju, J.W. (2013), "Behavior of reinforced concrete and steel fiber reinforced concrete shield TBM tunnel linings exposed to high temperatures", Constr. Build. Mater., 38, 610-618. https://doi.org/10.1016/j.conbuildmat.2012.09.019.   DOI
31 Bischoff, P.H. (2003), "Tension stiffening and cracking of steel fiber-reinforced concrete", J. Mater. Civil Eng. - ASCE, 15(2), 174-182.   DOI
32 Caratelli, A., Meda, A., Rinaldi, Z. and Romualdi, P. (2011), "Structural behaviour of precast tunnel segments in fiber reinforced concrete", Tunn. Undergr. Sp. Tech., 26(2), 284-291. https://doi.org/10.1016/j.tust.2010.10.003.   DOI
33 Gettu, R., Barragan, B., Garcia, T., Ramos, G., Fernandez, C. and Oliver, R. (2004), "Steel fiber reinforced concrete for the Barcelona metro line 9 tunnel lining", Proceedings of the 6th RILEM Symposium on FRC, Varenna, Italy, RILEM PRO.
34 Iijima, S. (1991), "Helical microtubules of graphitic carbon", Nature, 354(6348), 56-58. https://doi.org/10.1038/354056a0.   DOI
35 You, I., Yoo, D.Y., Kim, S., Kim, M.J. and Zi, G. (2017), "Electrical and self-sensing properties of ultra-high-performance fiber-reinforced concrete with carbon nanotubes", Sensors, 17(11), 2481. https://doi.org/10.3390/s17112481.   DOI
36 Kim, J.K., Kim, J.S., Ha, G.J. and Kim, Y.Y. (2007), "Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slag", Cement Concrete Res., 37(7), 1096-1105. https://doi.org/10.1016/j.cemconres.2007.04.006.   DOI
37 Lee, S.C., Cho, J.Y. and Vecchio, F.J. (2013b), "Simplified diverse embedment model for steel fiber-reinforced concrete elements in tension", ACI Mater. J., 110(4), 403-412.
38 Yilmaz, Y., Cetin, B. and Kahnemouei, V.B. (2017), "Compressive strength characteristics of cement treated sand prepared by static compaction method", Geomech. Eng., 12(6), 935-948. https://doi.org/10.12989/gae.2017.12.6.935.   DOI
39 Xu, G., He, C., Lu, D. and Wang, S. (2019), "The influence of longitudinal crack on mechanical behavior of shield tunnel lining in soft-hard composite strata", Thin-Wall. Struct., 144, 106282. https://doi.org/10.1016/j.tws.2019.106282.   DOI
40 Mohsen, M.O., Al Ansari, M.S., Taha, R., Al Nuaimi, N. and Taqa, A.A. (2019), "Carbon nanotube effect on the ductility, flexural strength, and permeability of concrete", J. Nanomater., 2019, 1-11. https://doi.org/10.1155/2019/6490984.   DOI
41 Taha, M.R., Alsharef, J.M., Khan, T.A., Aziz, M. and Gaber, M. (2018), "Compressive and tensile strength enhancement of soft soils using nanocarbons", Geomech. Eng., 16(5), 559-567. https://doi.org/10.12989/gae.2018.16.5.559.   DOI
42 Nochaiya, T., Tolkidtikul, P., Singjai, P. and Chaipanich, A. (2008), "Microstructure and characterizations of portland-carbon nanotubes pastes", Adv. Mater. Res., 55, 549-552. https://doi.org/10.4028/www.scientific.net/amr.55-57.549.   DOI
43 Rhee, I. and Roh, Y.-S. (2013), "Properties of normal-strength concrete and mortar with multi-walled carbon nanotubes", Mag. Concrete Res., 65(16), 951-961. https://doi.org/10.1680/macr.12.00212.   DOI
44 Shin, K.J., Jang, K.H., Choi, Y.C. and Lee, S.C. (2015), "Flexural behavior of HPFRCC members with inhomogeneous material properties", Materials, 8(4), 1934-1950. https://doi.org/10.3390/ma8041934.   DOI
45 Wang, Z., Yu, J., Li, G., Zhang, M. and Leung, C.K. (2019), "Corrosion behavior of steel rebar embedded in hybrid CNTs-OH/polyvinyl alcohol modified concrete under accelerated chloride attack", Cement Concrete Compos., 100, 120-129. https://doi.org/10.1016/j.cemconcomp.2019.02.013.   DOI
46 Yoo, D.Y., Kim, S. and Lee, S.H. (2018), "Self-sensing capability of ultra-high-performance concrete containing steel fibers and carbon nanotubes under tension", Sensor. Actuat. A: Phys., 276, 125-136. https://doi.org/10.1016/j.sna.2018.04.009   DOI
47 Xue, Y., Li, X., Li, G., Qiu, D., Gong, H. and Kong, F. (2020), "An analytical model for assessing soft rock tunnel collapse risk and its engineering application", Geomech. Eng., 23(5), 441-454. https://doi.org/10.12989/gae.2020.23.5.441.   DOI
48 Chen, S.J., Collins, F.G., MacLeod, A.J.N., Pan, Z., Duan, W.H., and Wang, C.M. (2011), "Carbon nanotube-cement composites: A retrospect", The IES J. part a: Civil Struct. Eng., 4(4), 254-265. https://doi.org/10.1080/19373260.2011.615474.   DOI
49 Shao, H., Chen, B., Li, B., Tang, S. and Li, Z. (2017), "Influence of dispersants on the properties of CNTs reinforced cement-based materials", Constr. Build. Mater., 131, 186-194. https://doi.org/10.1016/j.conbuildmat.2016.11.053.   DOI
50 Campillo, I., Dolado, J.S. and Porro, A. (2004), "High-performance nanostructured materials for construction", Special Publication-Royal Society of Chemistry, 292, 215-226. https://doi.org/10.1039/9781847551528-00215.   DOI
51 Deluce, J.R., Lee, S.C. and Vecchio, F.J. (2014), "Crack model for steel fiber-reinforced concrete members containing conventional reinforcement", ACI Struct. J., 111(1), 93-102.
52 Demirboga, R. (2003), "Influence of mineral admixtures on thermal conductivity and compressive strength of mortar", Energ. Build., 35(2), 189-192. https://doi.org/10.1016/S0378-7788(02)00052-X   DOI
53 Chen, G.H., Zou, J.F. and Qian, Z.H. (2019), "An improved collapse analysis mechanism for the face stability of shield tunnel in layered soils", Geomech. Eng., 17(1), 97-107. https://doi.org/10.12989/gae.2019.17.1.097.   DOI
54 Hawreen, A., Bogas, J.A. and Dias, A.P.S. (2018), "On the mechanical and shrinkage behavior of cement mortars reinforced with carbon nanotubes", Constr. Build. Mater., 168, 459-470. https://doi.org/10.1016/j.conbuildmat.2018.02.146.   DOI