• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.504-512
• /
• 2003

The plastic strain ratios(R-values) of low carbon steel sheets were determined by the automatic strain measurement method using two extensometers, the indirect photo method for the same tensile specimen during tensile test and the indirect method for the specimen after tensile test. The experimental results showed that the measured plastic strain ratios from the automatic strain measurement method using two extensometers coincided with those from the indirect photo method and the indirect method for all tensile specimens. In addition, the strain dependence of plastic strain ratios could be continuously recorded and the anisotropy of the strength coefficient, K, and strain hardening exponent, n, could be automatically calculated in three directions by computer through the use of two extensometers. The experimental results showed that the strain dependence of R-value was related to the anisotropy of strain hardening exponent in low carbon steel sheets.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.4
• /
• pp.844-854
• /
• 2005

We constructed a defined physical and genetic map of H. pylori strain 51, previously isolated from a Korean patient with a duodenal ulcer, by combining a restriction analysis by pulse-field gel electrophoresis with the construction of a BAC library. A Notl-digest of H. pylori strain 51 genome yielded seven fragments, from which the genomic size was estimated to be 1,698$\pm$24 kb. The BAC library was constructed from 50 to 200 kb fragments of HindIII-digested genomic DNA. From 700 BAC clones, an ordered overlapping maxi-set of 82 BAC clones was assembled that covered the entire genome. The positions of 15 genes were localized in the strain 51 genome with 4-22 kb of resolution and were compared with their orthologues in strain 26695 and strain J99. The arrangement of the 15 genes was identical in strain 51 and strain J99, except for flaA and hpaA. The plasticity zone of strain 51, like that of strain J99, was located in the single region, and was shorter than those of strain 26695 and strain J99. The strain 51 plasticity zone consisted of ORFs common only to strain 51 and J99 or to strain 51 and 26695, as well as strain 51-specific ORFs. Three genetic translocations and/or inversions were found between orthologue ORFs in strain 51 and strain J99. These results show that the chromosomal organization of strain 51 differs from Western strains such as strain 26695 and strain J99.

• Smart Structures and Systems
• /
• v.18 no.6
• /
• pp.1203-1215
• /
• 2016

When strain sensing cables are under long-term stress and cyclic loading, creep may occur in the jacket material and each layer of the cable structure may slide relative to other layers, causing fatigue in the cables. This study proposes a device for testing the fatigue characteristics of three types of cables operating under different conditions to establish a decay model for observing the patterns of strain decay. The fatigue characteristics of cables encased in polyurethane (PU), GFRP-reinforced, and wire rope-reinforced jackets were compared. The findings are outlined as follows. The cable strain decayed exponentially, and the decay process involved quick decay, slow decay, and stabilization stages. Moreover, the strain decay increased with the initial strain and tensile frequency. The shorter the unstrained period was, the more similar the initial strain levels of the strain decay curves were to the stabilized strain levels of the first cyclic elongation. As the unstrained period increased, the initial strain levels of the strain decay curves approached those of the first cyclic elongation. The tested sensing cables differed in the amount and rate of strain decay. The wire rope-reinforced cable exhibited the smallest amount and rate of decay, whereas the GFRP-reinforced cable demonstrated the largest.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.363.2-363.2
• /
• 2016

Stretchable strain sensors are becoming essential in diverse future applications, such as human motion detection, soft robotics, and various biomedical devices. One of the well-known approaches for fabricating stretchable strain sensors is to embed conductive nanomaterials such as metal nanowires/nanoparticles, graphene, conducting polymer and carbon nanotubes (CNTs) within an elastomeric substrate. Among various conducting nanomaterials, CNTs have been considered as important and promising candidate materials for stretchable strain sensors owing to their high electrical conductivity and excellent mechanical properties. In the past decades, CNT-based strain sensors with high stretchability or sensitivity have been developed. However, CNT-based strain sensors which show both high stretchability and sensitivity have not been reported. Herein, highly stretchable and sensitive strain sensors were fabricated by integrating single-walled carbon nanotubes (SWNTs) and nylon textiles via vacuum-assisted spray-layer-by-layer process. Our strain sensors had high sensitivity with 100 % tensile strain (gauge factor ~ 100). Cyclic tests confirmed that our strain sensors showed very robust and reliable characteristic. Moreover, our SWNTs-based strain sensors were easily and successfully integrated on human finger and knee to detect bending and walking motion. Our approach presented here might be route to preparing highly stretchable and sensitive strain sensors with providing new opportunity to realize practical wearable devices.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.4
• /
• pp.161-172
• /
• 2020

The tensile property of A5082 and A6060 aluminium wrought alloys was investigated, in terms of the strain rate sensitivity on alloy conditions by heat treatment and bake hardenability on pre-strain prior to strain ageing. The tensile test was carried out in a range of strain rate of 4.17 × 10^-5 s^-1 ~ 4.17 × 10^-5 s^-1 in room temperature and the nominal range of pre-strain was 3.0 ~ 10.5%. The tensile deformation of A5082 alloys is characterized as typical case of dynamic strain ageing with negative strain rate sensitivity for all conditions, and the tensile strength indicates a similar level regardless of alloy conditions, except only in full annealed condition. The stress-relief annealing on A6060 alloys can induce practical decrease in strength level of over approximately 100 MPa without any ductility loss, compared to as-rolled condition, while a full annealed and aged condition leads remarkable strengthening effect with the decrease of tensile elongation. Additionally, the bake hardenability of A5082 alloy by strain ageing indicates a negative dependence upon the increase of pre-strain, while A6060 alloy exhibits a positive sign even in low level relatively compared with conventional SPCC.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.907-914
• /
• 2018

In this article, we conducted molecular dynamics simulations to investigate the effect of applied strain and temperature on irradiation-induced damage in alpha-zirconium. Cascade simulations were performed with primary knock-on atom energies ranging between 1 and 20 KeV, hydrostatic and uniaxial strain values ranging from -2% (compression) to 2% (tensile), and temperatures ranging from 100 to 1000 K. Results demonstrated that the number of defects increased when the displacement cascade proceeded under tensile uniaxial hydrostatic strain. In contrast, compressive strain states tended to decrease the defect production rate as compared with the reference no-strain condition. The proportions of vacancy and interstitial clustering increased by approximately 45% and 55% and 25% and 32% for 2% hydrostatic and uniaxial strain systems, respectively, as compared with the unstrained system, whereas both strain fields resulted in a 15-30% decrease in vacancy and interstitial clustering under compressive conditions. Tensile strains, specifically hydrostatic strain, tended to produce larger sized vacancy and interstitial clusters, whereas compressive strain systems did not significantly affect the size of defect clusters as compared with the reference no-strain condition. The influence of the strain system on radiation damage became more significant at lower temperatures because of less annealing than in higher temperature systems.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.647-656
• /
• 2021

Knowing a material's true stress-strain curve is essential for performing a nonlinear finite element analysis to solve an elastoplastic problem. This study presents a simple methodology to determine the true stress-strain curve of type 304 and 316 austenitic stainless steels in the full range of strain from a typical tensile test. Before necking, the true stress and strain values are directly converted from engineering stress and strain data, respectively. After necking, a true stress-strain equation is determined by iteratively conducting finite element analysis using three pieces of information at the necking and the fracture points. The Hockett-Sherby equation is proposed as an optimal stress-strain model in a non-uniform deformation region. The application to the stainless steel under different temperatures and loading conditions verifies that the strain hardening behavior of the material is adequately described by the determined equation, and the estimated engineering stress-strain curves are in good agreement with those of experiments. The presented method is intrinsically simple to use and reduces iterations because it does not require much experimental effort and adopts the approach of determining the stress-strain equation instead of correcting the individual stress at each strain point.

• Computers and Concrete
• /
• v.22 no.6
• /
• pp.563-572
• /
• 2018

Uniaxial compressive strength test and uniaxial compression creep one were produced on four groups of twelve concrete specimens with different hole number by RLW-2000 rock triaxial rheology test system. The relationships between horizontal holes and instantaneous failure stress, the strain, and creep failure stress, the strain, and the relationships between stress level and instantaneous strain, creep strain were studied, and the relationship between horizontal holes and failure mode was determined. The results showed that: with horizontal hole number increasing, compressive strength of the specimens decreased whereas its peak strain increased, while both creep failure strength and its peak strain decreased. The relationships between horizontal holes and compressive strength of the specimens, the peak strain, were represented in quadratic polynomial, the relationships between horizontal holes and creep failure strength, the peak strain were represented in both linear and quadratic polynomial, respectively. Instantaneous strain decreased with stress level increasing, and the more holes in the blocks the less the damping of instantaneous strain were recorded. In the failure stress level, instantaneous strain reversally increased, creep strain showed three stages: decreasing, increasing, and sharp increasing; in same stress level, the less holes the less creep strain rate was recorded. The compressive-shear failure was produced along specimen diagonal line where the master surface of creep failure occurred, the more holes in a block, the higher chances of specimen failure and the more obvious master surface were.

• International Journal of Oral Biology
• /
• v.46 no.4
• /
• pp.155-159
• /
• 2021

This study aimed to develop strain-specific polymerase chain reaction (PCR) primers to detect Fusobacterium hwasookii KCOM 1249^T, F. hwasookii KCOM 1253, F. hwasookii KCOM 1256, F. hwasookii KCOM 1258, and F. hwasookii KCOM 1268 on the basis of nucleotide sequences of a gene specific to each strain. The unique genes for each F. hwasookii strain were determined on the basis of their genome sequences using Roary. The strain-specific PCR primers based on each strain-specific gene were designed using PrimerSelect. The specificity of each PCR primer was determined using the genomic DNA of the 5 F. hwasookii strains and 25 strains of oral bacterial species. The detection limit and sensitivity of each strain-specific PCR primer pair were determined using the genomic DNA of each target strain. The results showed that the strain-specific PCR primers correspond to F. hwasookii KCOM 1249^T, F. hwasookii KCOM 1253, F. hwasookii KCOM 1258, F. hwasookii KCOM 1256/F. nucleatum subsp. polymorphum KCOM 1260, or F. hwasookii KCOM 1268/Fusobacterium sp. oral taxon 203 were developed. The detection limits of these strain-specific PCR primers ranged from 0.2 to 2 ng of genomic DNA for each target strain. The results suggest that these strain-specific PCR primers are valuable in quality control for detecting specific F. hwasookii strains.

• Journal of Aquaculture
• /
• v.9 no.3
• /
• pp.195-203
• /
• 1996

Six strains (OKK, MOK, CHA, WON, 505 & PUA) of Korean rotifer, Brachionus plicatilis (S-type) were isolated from salt pond, and the resting egg production of these strains was investigated with the different salinities (10, 20, 30 put), Rotifer were cultured at $28^{\circ}C$ and 2,000 lux in 20 ml test tube with feeding Nannoohloris oculata. The maximum rotifer density was 2,050 inds./ml at 10 ppt for OKK strain, and MOK strain showed the highest specific growth rate (1.028) at 10 ppt. Mixis rate of CHA and WON strains increased with the lower salinity, while MOK strain increased the rate with salinity. PUA strain did not show the mixis rate even at the high rotifer density, and OKK strain showed the very low mixis rate ranging from 1.1 to $3.0\%$. Fertilization rate of CHA, MOK, SOS and WON strains was ranged from 10.4 to $68.8\%$, and OKK strain did not showed any fertilization rate. The highest production of resting egg in 20 ml test tube was 4,065 eggs at 10 ppt for WON strain. The results may suggest that the selection of rotifer strain and salinity are important factors for the mass production of resting egg.