Determination of true stress-strain curve of type 304 and 316 stainless steels using a typical tensile test and finite element analysis |
Kweon, Hyeong Do
(Korea Hydro & Nuclear Power Co, Ltd)
Kim, Jin Weon (Department of Nuclear Engineering, Chosun University) Song, Ohseop (Department of Mechanical Engineering, Chungnam National University) Oh, Dongho (Department of Mechanical Engineering, Chungnam National University) |
1 | K.J.R. Rasmussen, Full-range stress-strain curves for stainless steel alloys, J. Constr. Steel Res. 59 (2003) 47-61. DOI |
2 | ASME, Materials, ASME Boiler and Pressure Vessel Code Section II, 2015. |
3 | N.E. Dowling, Mechanical Behavior of Materials, fourth ed., Pearson Education, England, 2012. |
4 | R. Schneider, R.J. Grant, N. Sotirov, G. Falkinger, F. Grabner, C. Reichl, M. Scheerer, B. Heine, Z. Zouaoui, Constitutive flow curve approximation of commercial aluminium alloys at low temperatures, Mater. Des. 88 (2015) 659-666. DOI |
5 | P. Sollogoub, The OECD-NEA programme on metallic component margins under high seismic loads (MECOS): towards new criteria, in: ASME 2017 Pressure Vessel and Piping Conference, July 16-20, 2017. Waikoloa, USA. |
6 | G. Saji, Safety goals for seismic and tsunami risks: lessons learned from the Fukushima Daiichi disaster, Nucl. Eng. Des. 280 (2014) 243-249. DOI |
7 | C. Mondal, B. Podder, K.R. Kumar, D.R. Yadav, Constitutive description of tensile flow behavior of cold flow-formed AFNOR 15CDV6 steel at different deformation levels, J. Mater. Eng. Perform. 23 (2014) 3586-3599. DOI |
8 | ABAQUS Analysis User's Guide, Version 2019, Dassault Systems, 2019. |
9 | J. Choung, C. Shim, H. Song, Estimation of failure strain of EH36 high strength marine structural steel using average stress triaxiality, Mar. Struct. 29 (2012) 1-21. DOI |
10 | I. Nakamura, N. Kasahara, Excitation tests on elbow pipe specimens to investigate failure behavior under excessive seismic loads, in: ASME 2015 Pressure Vessel and Piping Conference, July 19-23, 2015. Boston, USA. |
11 | S.D. Snow, D.K. Morton, Strain-based acceptance criteria for energy-limited events, in: ASME 2009 Pressure Vessel and Piping Conference, July 26-30, 2009. Prague, Czech Republic. |
12 | Q. Pham, B. Lee, K. Park, Y. Kim, Influence of the post-necking prediction of hardening law on the theoretical forming limit curve of aluminium sheets, Int. J. Mech. Sci. 140 (2018) 521-536. DOI |
13 | J.H. Hollomon, Tensile deformation, Transactions of AIME 162 (1945) 268-290. |
14 | H.W. Swift, Plastic instability under plane stress, J. Mech. Phys. Solid. 1 (1952) 1-18. DOI |
15 | G. Mirone, A new model for the elastoplastic characterization and the stressstrain determination on the necking section of a tensile specimen, Int. J. Solid Struct. 41 (2004) 3545-3564. DOI |
16 | E. Voce, The relationship between stress and strain from homogeneous deformation, J. Inst. Met. 74 (1948) 537-562. |
17 | J.E. Hockett, O.D. Sherby, Large strain deformation of polycrystalline metals at low homologous temperatures, J. Mech. Phys. Solid. 23 (1975) 87-98. DOI |
18 | C. Annan, E. Beaumont, Low cycle fatigue of stainless steel plates under large plastic strain demands, Journal of Building Engineering 29 (2020) 101160. DOI |
19 | L. Wang, W. Tong, Identification of post-necking strain hardening behavior of thin sheet metals from image-based surface strain data in uniaxial tension tests, Int. J. Solid Struct. 75 (2015) 12-31. DOI |
20 | Y. Ling, Uniaxial true stress-strain after necking, AMP Journal of Technology 5 (1996) 37-48. |
21 | K. Zhao, L. Wang, Y. Chang, J. Yan, Identification of post-necking stress-strain curve for sheet metals by inverse method, Mech. Mater. 92 (2016) 107-118. DOI |
22 | K. Abdella, Inversion of a full-range stress-strain relation for stainless steel alloys, Int. J. Non Lin. Mech. 41 (2006) 456-463. DOI |
23 | F. Sebek, P. Kubik, J. Hulka, J. Petruska, Strain Hardening Exponent Role in Phenomenological Ductile Fracture Criteria, vol. 57, 2016, pp. 149-164. DOI |
24 | M. Paredes, V. Grolleau, T. Wierzbicki, On ductile fracture of 316L stainless steels at room and cryogenic temperature level, Materialia 10 (2020) 100624. DOI |
25 | I. Arrayago, E. Real, L. Gardner, Description of stress-strain curves for stainless steel alloys, Mater. Des. 87 (2015) 540-552. DOI |
26 | W.M. Quach, J.G. Teng, K.F. Chung, Three-stage full-range stress-strain model for stainless steels, J. Struct. Eng. 134 (2008) 1518-1527. DOI |
27 | ASTM, Standard Test Methods for Tension Testing of Metallic Materials, ASTM E8/E8M-09, 2009. |
28 | P.W. Bridgman, Studies in Large Plastic Flow and Fracture, Harvard University Press, USA, 1964. |
29 | A. Considere, Ann. Ponts Chaussees 9 (1885) 574-605. |
30 | M. Kamaya, M. Kawakubo, A procedure for determining the true stress-strain curve over a large range of strains using digital image correlation and finite element analysis, Mech. Mater. 43 (2011) 243-253. DOI |
31 | K.B. Othmen, N. Haddar, A. Jegat, P. Manach, K. Elleuch, Ductile fracture of AISI 304L stainless steel sheet in stretching, Int. J. Mech. Sci. 172 (2020) 105404. DOI |
32 | H.D. Kweon, E.J. Heo, D.W. Lee, J.W. Kim, A methodology for determining the true stress-strain curve of SA-508 low alloy steel from a tensile test with finite element analysis, J. Mech. Sci. Technol. 32 (2018) 3137-3143. DOI |
33 | M. Paredes, D.F.B. Sarzosa, R. Savioli, T. Wierzbicki, D.Y. Jeong, D.C. Tyrell, Ductile tearing analysis of TC128 tank car steel under model I loading condition, Theor. Appl. Fract. Mech. 96 (2018) 658-675. DOI |
34 | G. Sainath, B.K. Choudhary, J. Christopher, E.I. Samuel, M.D. Mathew, Applicability of Voce equation for tensile flow and work hardening behaviour of P92 ferritic steel, Int. J. Pres. Ves. Pip. 132 (2015) 1-9. DOI |
35 | S.K. Paul, S. Roy, S. Sivaprasad, H.N. Bar, S. Tarafder, Identification of post-necking tensile stress-strain behavior of steel sheet: an experimental investigation using digital image correlation technique, J. Mater. Eng. Perform. 27 (2018) 5736-5743. DOI |
36 | P. Ludwik, Elements der Technologischen Mechanik, Verlag Von Julius Springer, Leipzig, 1909, p. 32. |
37 | M. Kamaya, Y. Kitsunai, M. Koshiishi, True stress-strain curve acquisition for irradiated stainless steel including the range exceeding necking strain, J. Nucl. Mater. 465 (2015) 316-325. DOI |
38 | J. Agirre, L. Galdos, E.S. Argandona, J. Mendiguren, Hardening prediction of diverse materials using the digital image correlation technique, Mech. Mater. 124 (2018) 71-79. DOI |
39 | M. Joun, J.G. Eom, M.C. Lee, A new method for acquiring true stress-strain curves over a large range of strains using a tensile test and finite element method, Mech. Mater. 40 (2008) 586-593. DOI |
40 | L. Li, S. Liu, B. Ye, S. Hu, Z. Zhou, Quantitative analysis of strength and plasticity of a 304 stainless steel based on the stress-strain curve, Met. Mater. Int. 22 (2016) 391-396. DOI |
41 | P.E. Armstrong, J.E. Hockett, O.D. Sherby, Large strain multidirectional deformation of 1100 aluminum at 300 K, J. Mech. Phys. Solid. 30 (1982) 27-58. |
42 | E.E. Cabezas, D.J. Celentano, Experimental and numerical analysis of the tensile test using sheet specimens, Finite Elem. Anal. Des. 40 (2004) 555-575. DOI |
43 | M. Saboori, H. Champliaud, J. Gholipour, A. Gakwaya, J. Savoie, P. Wanjara, Extension of flow stress-strain curves of aerospace alloys after necking, Int. J. Adv. Manuf. Technol. 83 (2016) 313-323. DOI |