• Architectural research
• /
• 제20권2호
• /
• pp.53-64
• /
• 2018

A nonlinear analytical model has been proposed for two-span two-story reinforced concrete frames with relaxed section details. The analytical model is composed of beam, column, and beam-column joint elements. The goal of this study is to develop a simple and light nonlinear model for two-dimensional reinforced concrete frames since research in earthquake engineering is usually involved in a large number of nonlinear dynamic analyses. Therefore, all the nonlinear behaviors are modeled to be concentrated on flexural plastic hinges at the end of beams and columns, and the center of beam-column joints. The envelope curve and hysteretic rule of the nonlinear model for each element are determined based on experimental results, not theoretical approach. The simple and light proposed model can simulate the experimental results well enough for nonlinear analyses in earthquake engineering. Consequently, the proposed model will make it easy to developing a nonlinear model of the entire frame and help to save time to operate nonlinear analyses.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.541-546
• /
• 1998

The objective of this research is to observe the actual response of low-rise nonseismic moment-resisting infilled reinforced concrete frame subjected to varied levels of earthquake ground motions. First of all, the reduction scale for the model was determined as 1 : 5 considering the capacity of the shaking table to be used. This model was, then, subjected to the shaking table motions simulating Taft N21E component earthquake ground motions, whose peak ground accelerations(PGA`s) were modified to 0.12g, 0.2g, 0.3g, and 0.4g. The global behavior and failure mode were observed. The lateral accelerations and displacements at each story and local deformations at the critical portions of structure were measured. Before and after each earthquake simulation test, free vibration tests were performed to find the changes in the natural period of the model.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.427-432
• /
• 1998

The objective of this research is to observe the actual response of low-rise nonseismic moment-resisting reinforced frame subjected to varied levels of earthquake ground motions. First of all, the reduction scale for the model was determined as 1 : 5 considering the capacity of the shaking table to be used. This model was, then, subjected to the shaking table motions simulating Taft N21E component earthquake ground motions, whose peak ground accelerations(PGA's) were modified to 0.12g, 0.2g, 0.3g, and 0.4g. The global behavior and failure mode were observed. The lateral accelerations and displacements at each story and local deformations at the critical portions of structure were measured. The base shear was measured by using specially made load cells. Before and after each earthquake simulation test, free vibration tests were performed to find the changes in the natural period and damping ratio of the model.

• International Journal of Concrete Structures and Materials
• /
• 제7권3호
• /
• pp.175-182
• /
• 2013

A damage-based approach for the performance-based seismic assessment of reinforced concrete frame structures is proposed. A new methodology for structural damage assessment is developed that utilizes response information at the material level in each section fiber. The concept of the damage evolution is analyzed at the section level and the computed damage is calibrated with observed experimental data. The material level damage parameter is combined at the element, story and structural level through the use of weighting factors. The damage model is used to compare the performance of two typical 12-story frames that have been designed for different seismic requirements. A series of nonlinear time history analyses is carried out to extract demand measures which are then expressed as damage indices using the proposed model. A probabilistic approach is finally used to quantify the expected seismic performance of the building.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.72-77
• /
• 2003

In this paper, an experimental verification of system identification technique for constructing finite element model is conducted for a three-story test structure equipped with an active mass driver (AMD). Twenty Gaussian white noises were used as the input for AMD, and the corresponding accelerations of each floors are measured. Then, the complex frequency response function (FRF) for the input, the force induced by the AMD, was obtained and subsequently, the Markov parameters and system matrices were estimated. The magnitudes as well as phase of experimentally obtained FRFs match well with those of analytically obtained FRFs.

• 한국지진공학회논문집
• /
• 제16권6호
• /
• pp.13-20
• /
• 2012

In this study, 5-story structures were designed in accordance with KBC2009 for inelastic time history analysis of RC IMRF. Bending moment-curvature relationship for beam and column was identified with fiber model and bending moment-rotation relationship for beam-column joint was calculated with simple and unified joint shear behavior model and moment equilibrium relationship for the joint. The hysteretic behavior was simulated with three-parameter model suggested in IDARC program. The analytical results showed that the inelastic shear behavior of the joint could be neglected in the structural design for seismic design category C but the structure of category D did not satisfy the criteria of FEMA 356 for collapse prevention performance level.

• 한국공간구조학회논문집
• /
• 제21권2호
• /
• pp.57-66
• /
• 2021

This study develops finite element models for seismically-deficient reinforced concrete building frame retrofitted using fiber-reinforced polymer jacketing system and validates the finite element models with full-scale dynamic test for as-built and retrofitted conditions. The bond-slip effects measured from a past experimental study were modeled using one-dimensional slide line model, and the bond-slip models were implemented to the finite element models. The finite element model can predict story displacement and inter-story drift ratio with slight simulation variation compared to the measured responses from the full-scale dynamic tests.

• 미술자료
• /
• 제100권
• /
• pp.50-80
• /
• 2021

본고는 원각사탑에 대한 지난 백 년간의 근대 학설사를 층수에 초점을 맞추어 비판적으로 성찰하였다. 먼저 제II장에서는 근대 개항기에 조선을 여행한 서양인들이 종래 한성의 '비미(非美)'내지는 흉물로 간주되던 원각사탑을 한성의 '기관(奇觀)'내지 '위관(偉觀)'으로 재발견하는 역동적인 과정을 추적하였다. 이들은 불탑에 관한 예비지식이 거의 없는 서양 출신이었기 때문에, 역설적으로 원각사탑에 대하여 객관적인 견문기를 남길 수 있었는바, 그들이 접촉한 조선 지식인들을 통하여 대체로 13층설을 받아들였다. 이어서 제III장에서는 대한제국 선포 이후 일인 관변학자들이 원각사탑을 본격적으로 학술 조사하고, 일제식민기 동안 조선총독부가 원각사탑을 문화재로서 관리하는 과정 및 그 문제점을 언급하였다. 특히 지난 100여 년 동안 원각사탑 층수 문제에 관하여 가장 큰 영향력을 행사한 세키노 타다시(關野 貞)의 학설이 10층설에서 13층설로, 다시 다층설로 변하는 문제를 집중 조명하였다. 마지막으로 제IV장에서는 해방 이후부터 1962년까지 원각사탑에 대한 인식이 다층설에서 10층설로 바뀐 경과를 정리하되, 선행하는 일제식민기 조선 지식인들의 인식이 13층설 일변도였음을 특기해두었다. 다만 1962년 이후 지금까지 원각사탑에 관련하여 중요한 연구성과가 적지않이 발표되었지만, 층수에 관한 한 대부분 1962년에 확정된 10층설을 전제로 하였기 때문에, 본고에서는 따로 정리하지 않았다. 학설사 검토의 결과, 원각사탑이 13층탑으로서 건립되었다는 근거가 명백함에도 불구하고, 일제시기는 물론 해방 이후 지금까지 백 년이 넘도록 13층설은 단 한 번도 공인받지 못하였으며, 학계에서 층수 문제가 본격적으로 다루어지지도 않았음을 확인할 수 있었다. 원각사탑과 경천사탑이 10층탑이라는 현재의 통설은, 백 년 전에 세키노 타다시(關野 貞)가 최초로 주창하였다. 세키노는 원각사에 남아있는 「원각사비」가 글자를 거의 판독할 수 없을 정도로 마멸이 심하였기 때문에 원각사탑의 현상만 건축학의 관점에서 고찰하고 10층탑이라고 주장하였다. 공교롭게도 그 직후에 발견된 『속동문선』에 실린 「원각사비」에서 '탑 13층을 세웠다.'라는 구절이 확인되었다. 또한 15세기 후반 왕명으로 『동국여지승람』을 편찬한 편찬자들도 원각사탑의 모범인 경천사탑 또한 '13층탑'임을 분명히 인식하고 있었다. 특히 원각사탑 건립 직후 왕명으로 건립된 「원각사비」는 세키노의 10층설이 전제에 오류가 있음을 명백히 보여준다. 세키노는, '3층의 기단 위에 탑신 10층이 올려져 있어서, 세상 사람들이 13층탑이라고 불렀다.'라고 하였는데, 「원각사비」는 세조가 처음부터 13층탑으로서 원각사탑을 건립하였음을 생생하게 증언한다. 다만 이례적이게도 13층탑을 3층의 기단 위에 탑신 10층을 올린 형태로 조성하였을 따름이다. 그렇다면 세조는 왜 13층탑을 세웠으며, 왜 그것을 3층의 기단 위에 탑신 10층이라는 이례적인 형태로 구현하였는가? 세조가 원각사13층탑을 건립한 의도를 온전히 이해하려면, 먼저 원각사탑의 정체를 파악해야 하는바, 그 첫 단추는 원래의 명칭을 회복하는 데 있다. 필자는 전제의 오류 위에 구축된 세키노의 10층설-나아가 절충적인 다층설-은 이제 폐기하고, 「원각사비」에서 말하는 13층설을 복원할 것을 촉구한다.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.93-107
• /
• 2016

Seismic fragility analysis is a probabilistic decision-making framework which is widely implemented for evaluating vulnerability of a building under earthquake loading. It requires ingredient named probabilistic model and commonly developed using statistics requiring collecting data in large quantities. Preparation of such a data-base is often costly and time-consuming. Therefore, in this paper, by developing generic seismic drift demand model for regular-multi-story steel moment resisting frames is tried to present a novel application of the probabilistic decision-making analysis to practical purposes. To this end, a demand model which is a linear function of intensity measure in logarithmic space is developed to predict overall maximum inter-story drift. Next, the model is coupled with a set of regression-based equations which are capable of directly estimating unknown statistical characteristics of the model parameters.To explicitly address uncertainties arise from randomness and lack of knowledge, the Bayesian regression inference is employed, when these relations are developed. The developed demand model is then employed in a Seismic Fragility Analysis (SFA) for two designed building. The accuracy of the results is also assessed by comparison with the results directly obtained from Incremental Dynamic analysis.

• 한국중재학회지:중재연구
• /
• 제7권1호
• /
• pp.3-18
• /
• 1997