• 대한토목학회논문집
• /
• 제26권1B호
• /
• pp.27-38
• /
• 2006

현재 국내의 홍수예보시스템의 예측 모형으로 저류함수모형을 사용하고 있다. 저류함수모형은 계산절차가 간편하고 홍수유출의 비선형성을 고려할 수 있는 방법이므로 선형모형보다 합리적이라고 알려져 있다. 그러나 저류함수모형을 실제 홍수사상에 적용하는데 있어 매개변수를 결정하는 것이 매우 어렵다. 저류함수모형의 매개변수 보정을 모형 운영자의 주관적인 판단아래 시행착오에 의한 수동보정 방법을 사용하여 왔다. 본 논문에서는 홍수통제소에서 사용하고 있는 저류함수 모형의 대표(평균) 매개변수와 시행착오법(Trial & Error Method) 그리고 최적화기법(Optimization Technique)에 의해 보정된 매개변수를 비교 분석하였다. 또한 모의효율을 평가하기 위하여 목적함수별, 보정방법별로 평가지표들을 산정하고 비교 분석하였다. 분석 결과, 최적화기법의 하나인 유전자 알고리즘(Genetic Algorithm)이 목적함수에 따른 변동성이 가장 적었으며, 목적함수로는 SSR(Sum of Squared of Residual)이 가장 적합한 것으로 판단하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.111-118
• /
• 2017

The increased diversity of different types of energy sources requires moving towards smart distribution networks. This paper proposes a probabilistic DG (distributed generation) units planning model to determine technology type, capacity and location of DG units while simultaneously allocating ESS (energy storage systems) based on pre-determined capacities. This problem is studied in a wind integrated power system considering loads, prices and wind power generation uncertainties. A suitable method for DG unit planning will reduce costs and improve reliability concerns. Objective function is a cost function that minimizes DG investment and operational cost, purchased energy costs from upstream networks, the defined cost to reliability index, energy losses and the investment and degradation costs of ESS. Electrical load is a time variable and the model simulates a typical radial network successfully. The proposed model was solved using the DICOPT solver under GAMS optimization software.

• 대한토목학회논문집
• /
• 제26권1B호
• /
• pp.39-50
• /
• 2006

홍수를 예측하기 위해서 국내 5대강 유역의 홍수통제소는 저류함수모형을 사용하고 있으며 현재까지 홍수예측에 대한 많은 연구가 이루어지고 있다. 이에 본 논문에서는 현재 홍수통제소에서 사용되고 있는 저류함수모형과 과거의 강우-수위 관계를 이용한 회귀분석(regression analysis), 그리고 인공신경망(artificial neural network)을 이용하여 홍수를 예측하고 이를 비교, 분석하고자 하였다. 저류함수모형의 경우는 홍수통제소의 대표매개변수와 보정된 최적(평균)매개변수를 적용하였다. 그리고 회귀분석과 인공신경망은 1995~2001년까지의 홍수사상 중 4개의 홍수사상을 선택하여 회귀계수를 구하고 역전파(backpropagation) 알고리즘을 사용하여 학습을 시켰다. 그 결과 저류함수모형의 경우 최적 매개변수를 이용하였을 때 기존의 홍수통제소에서 사용하고 있는 대표매개변수보다 예측이 개선되었으며, 회귀분석의 방법인 다중회귀분석, Robust 회귀분석, Stepwise 회귀분석을 이용한 홍수예측은 비교적 정확한 결과를 얻을 수 있었다. 역전파 알고리즘을 사용한 인공신경망의 경우도 회귀분석을 이용한 홍수예측보다는 다소 못하였지만 정확한 결과를 얻을 수 있었다.

• 한국농공학회논문집
• /
• 제47권3호
• /
• pp.15-25
• /
• 2005

Ninety tow percent of over 1,800 gate controlled dams in Korea are classified as small dams. The primary purpose of these small dams is to supply irrigation water. Therefore, while large dams can store as much as 80 percent of precipitation and thus are efficient to control flood, small dams are often lack of flood control function resulting in increased susceptibility drought and flood events. The purpose of this study is to develope a storage management model for irrigation dams occupying the largest portion of small dams. The proposed Storage Management Model (STMM) can be applied to the Seongju dam for efficient management. Besides, the operation standard is capable of analyzing additional available water, considering water demand and supply conditions of watershed realistically. And the model can improve the flood control capacity and water utilization efficiency by the flexible operation of storage space. Consequently, if the small dams are managed by the proposed Storage management model, it is possible to maximize water resources securance and minimize drought and flood damages.

• Water Engineering Research
• /
• 제1권3호
• /
• pp.171-185
• /
• 2000

A mathematical model to adequately predict complex mixing characteristics of sorptive polluants in natural streams with pools-and-riffes has been developed. In this model, sorption of pollutants onto the bed sediment as well as mass storage and exchange in the storage zones were incorporated into one-dimensional mass balance equatins. The geometric and hydraulic characteristics of the pool-riffle sequences were properly conceptualized. Simulations with parameters of pool-and-riffle streams better fit the measured data in overall shape and peak concentration than simulations with parameters for uniform channels. The analyses on the characteristics of the storage zone model parameters reveal that a linear relationship between the logrithm of the storage zone volume ratio and a function of the friction factor exists. A linear relatiohship might also be tenatively assumed between the logarithm of the dimensionless mass exchange coefficient and the logarithm of the aspect ratio of the storage zone if some of the high values of the dimensionless mass exchange coefficient collected on the successive bed forms are excluded.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.60-66
• /
• 2014

A control oriented model of the Lean $NO_x$ trap (LNT) was developed to determine the timing of $NO_x$ regeneration. The LNT model consists of $NO_x$ storage and reduction model. Once $NO_x$ is stored ($NO_x$ storage model), at the right timing $NO_x$ should be released and then reduced ($NO_x$ reduction model) with reductants on the catalyst active sites, called regeneration. The $NO_x$ storage model simulates the degree of stored $NO_x$ in the LNT. It is structured by an instantaneous $NO_x$ storage efficiency and the $NO_x$ storage capacity model. The $NO_x$ storge capacity model was modeled to have a Gaussian distribution with a function of exhaust gas temperature. $NO_x$ release and reduction reactions for the $NO_x$ reduction model were modeled as Arrhenius equations. The parameter identification was optimally performed by the data of the bench flow reactor test results at space velocity 50,000/hr, 80,000/hr, and temperature of $250-500^{\circ}C$. The LNT model state, storage fraction indicates the degree of stored $NO_x$ in the LNT and thus, the timing of the regeneration can be determined based on it. For practical purpose, this model will be verified more completely by engine test data which simulate the NEDC transient mode.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제14권2호
• /
• pp.53-64
• /
• 2008

This study is the architectural planning of 5 distribution supporting facilities for traditional herbal medicine cultivated in the rural areas. The main function of the facility consists of storage, pre-treatment/processing, loading/unloading and the assistant function consists of inspection, office, exhibition/sale, technical equipment etc. The planning shows the modular plan and the section plan of the storage space reflecting the shape and size of storage container, the action radius of carrier and the possibilities of space lease. The total floor area of the storage is 3,192$m^2$ consisting of 27 space. The total floor area of the pre-treatment/processing is 1,488$m^2$ consisting of 7 space. The total floor area of the loading/unloading is 329$m^2$ consisting of 4 space. The total floor area of each facility storage is 8,284$m^2$ including of public space 2,170$m^2$. Also this planning shows the preliminary design, "fundamental model design" for 5 rural government BTL project. Therefore, this result of planning will be the guidelines of the RFP(Request For Proposal) for the private sector company interested in this BTL project.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.531-534
• /
• 2003

A model using a nonlinear programming technique was applied for allocating the optimal water depending on storage level changes of the Sumjin dam. The objective function of optimization model was set up to maintain the storage at target level, to satisfy the water demand, and to maximize the hydropower production. In this way, the water allocation as to target level and instream flow was optimized and compared with historical operational data.

• 한국수자원학회논문집
• /
• 제33권3호
• /
• pp.341-350
• /
• 2000

본 연구의 목적은 추계동역학적 상태·공간형태의 하도 저류함수모형을 개발하고 실시간 홍수예보를 위한 모형의 적용성을 검토하는데 있다. 팔당댐에서 인도교 지점에 이르는 하도구간을 개발된 모형의 적용 대상구간으로 설정하였으며, 1987∼1998년에 발생한 13개의 홍수사상을 선택하여 모형 매개변수 산정 및 적용성을 검토하였다. 그 결과 최적 매개변수는 각 홍수사상마다 다르지만, 현재 실무에서 사용하고 있는 매개변수를 사용한 유량예측은 비교적 합리적인 결과를 제시하였다. 또한 본 연구에서 개발한 추계동역학적 모형에 의한 유량예측 결과와 기존의 확정론적 모형에 의한 결과를 비교·검토한 결과 본 연구모형이 보다 정확한 결과를 제시하는 것으로 나타났다. 본 연구 대상지역의 예측가능시간을 분석한 결과 비교적 지류의 유입이 적은 홍수사상의 경우 5시간 정도까지는 정확한 하류단이 유량예측이 가능한 것을 판단된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1219-1223
• /
• 2005

This study was accomplished to confirm the possibility of supplying stream minimum flow from detention storage which was determined to reduce peak flows of flood within developing planned district. The results analyzed was summarized as follows; Firstly, Sin-gil district situated in Ansan city was selected, of which watershed area has $0.56km^2$. And detention storage was determined to $5,370m^3$ from analyzing flood volume by the SCS unit hydrograph method. Secondly, using Visual Basic ver 6.0, a detention storage water balance model was developed, in which simulation was based on conditioning storage inflow and outflow according to streamflow volume or rate state. And streamflow was simulated using the DAWAST model. Thirdly, detention operation scenarios were consisted of the combinations with inflow referencing streamflow of 5mm/day, 10mm/day and outflow referencing streamflow of 1mm/day, 2mm/day. The developed detention storage water balance model was operated to simulate daily water storages of detention sized on flood by scenarios. Stream minimum flows were able to be supplied during 209 days to 237 days per a year, total volume of stream minimum flows supplied for this period was analyzed to reach 27 to $55\% of yearly streamflow volume. If inflow criteria of streamflows to detention was considered to be established on a theoretical condition, it is expected to supply stream minimum flows of 20 to $30\% of yearly streamflow from stream to detention. Also to maximize function of supplying urban stream minimum flow from detention storages, sewage waters within developing planned district have to be treated and entered to detention inflow together with streamflows to enrich function of detention planned to reduce flood volumes.