• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.5 no.1
• /
• pp.85-105
• /
• 1981

Information is an essential factor leading the rapid progress which is one of the distinguished characteristics in modem society. As more information is required and as more is supplied by individuals, governmental units, businesses, and educational institutions, the greater will be the requirement for efficient methods of communication. One possibility for improving the information dissemination process is to use computers. The capabilities of such machine are beginning to be used in the process of Information storage, retrieval and dissemination. An important problems, that must be carefully examined is whether one technique for information retrieval is better for worse than another. This paper examines problem of how to evaluate an information retrieval system. One specific approach is a cost accounting model for use in studying how to minimize the cost of operating a mechanized retrieval system. Through the use of cost analysis, the model provides a method for comparative evaluation between systems. The general cost accounting model of the literature retrieval system being designed by this study are given below. 1. The total cost accounting model of the literature retrieval system. The total cost of the literature retrieval system = (the cost per unit of user time X the amount of user time) + ( the cost per unit of system time X the amount of system time) 2. System cost accounting model system cost = (the pre-search system cost per unit of time X time) + (the search system cost per unit of time X time) + (the post search system cost per unit of time X time) 1) Pre-search system cost per unit of time = cost of channel per unit time + cost of central processing unit per unit time + cost of storage per unit time 2) Search system cost per unit of time = comparison cost + document representation cost. 3) Post-search system cost per unit of time. = cost of channel per unit time + cost of central processing unit per unit time + cost of storage per unit time 3. User cost accounting model Total user cost = [pre-search user cost per unit of time X (time + additional time) ] + [search user cost per unit of time X (time + additional time) ] + [post-search user cost per unit of time X (time + additional time) ].

• Journal of Korea Water Resources Association
• /
• v.33 no.3
• /
• pp.341-350
• /
• 2000

The objectives of this study are to develop a state-space form of stochastic dynamic storage function routing model and to test the model performance for real-time flow forecast. The selected study area is the main Han River starting from Paldang Dam site to Indogyo station and the 13 flood events occurred from 1987 to 1998 are selected for computing model parameters and testing the model performance. It was shown that the optimal model parameters are quite different depending on Hood events, but the values used on field work also give reasonable results in this study area. It is also obvious that the model performance from the stochastic-dynamic model developed in this study gives more accurate and reliable results than that from the existing deterministic model. Analysis for allowable forecast lead time leads that under the current time step the reasonable predicted downstream flows in 5 hours time advance are obtained from the stochastic dynamic model on relatively less lateral inflow event in the study area.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2344-2346
• /
• 2002

A vacuum control system has been developed for using Ethernet Multi Serial Device Severs (EMSDS) for the Pohang Accelerator Laboratory (PAL) storage ring. There are 124 vacuum ion pumps at the storage ring. It was a very important problem to solve the problem how to control such a big number of vacuum pumps distributed around the ring. After discussions, we decided to develop a serial to ethernet interrace device sever that will be mounted in the control system rack. It has a 32-bits microprocessor embedded Linux, 12 ports RS485 (or RS232) slave interface. one channel 10/100BaseTx ethernet host port, one channel UART host port, and 16 Mbytes large memory buffer. These vacuum pumps are connected to Ion-Pump serial controllers, which chop the AC current so as to control the current in the pumps. The EMSDS connect either 100BaseTx or 10BaseT ethernet networks to asynchronous serial ports for communication with serial device. It can simultaneously control up to 12 ion-pump serial controllers. 12 EMSDS are connected to a personal computer (PC) through the network. The PC can automatically control the EMSDS by sending a set of commands through the TCP/IP network. Upon receiving a command from a PC running under Windows2000 through the network, the EMSDS communicate through the stave serial interrace ports to ion-pump controller. We added some software components on the top of EPICS (Experimental Physics and Industrial Control System) toolkit.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.6
• /
• pp.111-118
• /
• 2020

This study developed a rainwater harvesting system for the irrigation of upland on sloping area. The assessment of water supply capacity was evaluated in farm field experience. This system consists of a water catchment device and a collapsible storage tank. The water catchment device was designed to collect runoff water in natural channel of 500 mm width into a pipe of 50 mm inner diameter. The device has funnel-shaped plan and cross-section of square. The storage capacity of the collapsible water tank was caculated to meet the water demand for irrigation in 30 a cultivated land for 10-year frequancy drought. The tank has a cuboid shape with a capacity of 30 ㎥, 5 m in width and length, 1.2 m in height. This system can supply 92% of the water required for drop irrigation of red pepper and 88% of the water required for drop irrigation of onions in 30 a cultivation land during the month of May and June. In the case of 16-dry days of 10-years frequency, this system is capable to irrigate 100% of required water for red pepper and onion, 76.7% of required water for Omija (Schisandra chinensis), and 51.5% of required water for autumn kimchi cabbage.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.8
• /
• pp.45-52
• /
• 2011

Flash memory is becoming widely prevalent in various area due to high performance, non-volatile features, low power, and robust durability. As price-per-bit is decreased, NAND flash based SSDs (Solid State Disk) have been attracting attention as the next generation storage device, which can replace HDDs (Hard Disk Drive) which have mechanical properties. Especially for the single package SSD, if channel number or FIFO buffer size per channel increases to improve performance, the size of a controller and I/O pin count will increase linearly with channel numbers and form factor will be affected. We propose a novel technique which can minimize form factor by optimizing the number of NAND flash channels and the size of interface FIFO buffer in the SSD. For SSD with 10 channel and double buffer, the experimental results show that buffer block size can be reduced about 73% without performance degradation and total size of a controller can be reduced about 40% because control block per channel and I/O pin count decrease according to decrease channel number.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.3
• /
• pp.379-392
• /
• 2024

With the rapid increase in data, saving storage space and improving the efficiency of data transmission have become critical issues, making the research on the efficiency of data compression technologies increasingly important. Lossless algorithms can precisely restore original data but have limited compression ratios, whereas lossy algorithms provide higher compression rates at the expense of some data loss. There has been active research in data compression using deep learning-based algorithms, especially the autoencoder model. This study proposes a new side-channel analysis data compressor utilizing autoencoders. This compressor achieves higher compression rates than Deflate while maintaining the characteristics of side-channel data. The encoder, using locally connected layers, effectively preserves the temporal characteristics of side-channel data, and the decoder maintains fast decompression times with a multi-layer perceptron. Through correlation power analysis, the proposed compressor has been proven to compress data without losing the characteristics of side-channel data.

• KIISE Transactions on Computing Practices
• /
• v.20 no.10
• /
• pp.525-533
• /
• 2014

SCST(The generic SCSI target subsystem for Linux) enables developers to make SCSI target storage and supports various SCSI network protocol such as iSCSI, FC, SRP. In this paper, we propose storage virtualization method using SCST and virtualize all flash array as high performance storage through 4Gb Fiber Channel, 10Gb Ethernet and 40Gb Infiniband and evaluate their performance, respectively. Experimental result shows that 40Gb infiniband network appliance have better performance than others. In case of sequential/random read, 40Gb infiniband network appliance shows 78% and 79% of local all flash array performance attached to SCSI target system. In case of sequential/random write, it shows 83% and 88% of local flash array performance attached to SCSI target system.

• Journal of Internet Computing and Services
• /
• v.4 no.1
• /
• pp.53-65
• /
• 2003

I/O processing speed of relatively sluggish storage devices incurs overall performance degradation in computer systems. As a solution to improve the situation, SAN(Storage Area Network) has been proposed. In order to utilize a SAN system more effectively, where storage devices are directly connected with a high speed network such as Fibre Channel, a proper management tool is needed. In this paper, we present a design and implementation of a performance monitoring and configuration management tool for the SANtopia system which supports global file sharing in the SAN environment The developed tool is to monitor the performance of the Linux hosts composing the SANtopia system and to manage the configuration of the hosts and storage devices. It also supports GUI(Graphic User Interface) environment using the JAVA programming language.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.70-75
• /
• 2011

Longitudinal recording has been the cornerstone of all two generations of magnetic recording systems, FDD and HDD. In recent, perpendicular recording has received much attention as promising technology for future high-density recording system Research into signal processing techniques is paramount for the issued storage system and is indispensable like longitudinal recording systems. This paper focuses on the performance evaluation of the various detectors under perpendicular recording system. Parameters for improving the their performance are examined for some detectors. Detectors considered in this work are the partial response maximum likelihood (PRML), noise-predictive maximum likelihood (NPML), fixed delay tree search with decision feedback (FDTS/DF), dual decision feedback equalizer (DDFE) and multilevel decision feedback equalizer (MDFE). Their performances are analyzed in terms of mean squared error (MSE) and noise power spectra, and similarity between recording channel and partial response (PR) channel.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.3
• /
• pp.246-259
• /
• 2011

This study presents a structural health monitoring (SHM) method for bolted connections by using multi-channel wireless impedance sensor nodes and multiple PZT-interfaces. To achieve the objective, the following approaches are implemented. Firstly, a PZT-interface is designed to monitor bolt loosening in bolted connection based on variation of electro-mechanical(EM) impedance signatures. Secondly, a wireless impedance sensor node is designed for autonomous, cost-efficient and multi-channel monitoring. For the sensor platform, Imote2 is selected on the basis of its high operating speed, low power requirement and large storage memory. Finally, the performance of the wireless sensor node and the PZT-interfaces is experimentally evaluated for a bolt-connection model Damage monitoring method using root mean square deviation(RMSD) index of EM impedance signatures is utilized to estimate the strength of the bolted joint.