• Journal of Radiation Protection and Research
• /
• v.41 no.2
• /
• pp.81-86
• /
• 2016

Background: For positron emission tomography (PET) application, cadmium zinc telluride (CZT) has been investigated by several institutes to replace detectors from a conventional system using photomultipliers or Silicon-photomultipliers (SiPMs). The spatial and energy resolution in using CZT can be superior to current scintillator-based state-of-the-art PET detectors. CZT has been under development for several years at the Korea Atomic Energy Research Institute (KAERI) to provide a high performance gamma ray detection, which needs a single crystallinity, a good uniformity, a high stopping power, and a wide band gap. Materials and Methods: Before applying our own grown CZT detectors in the prototype PET system, we investigated preliminary research with a developed discrete type data acquisition (DAQ) system for coincident events at 128 anode pixels and two common cathodes of two CZT detectors from Redlen. Each detector has a $19.4{\times}19.4{\times}6mm^3$ volume size with a 2.2 mm anode pixel pitch. Discrete amplifiers consist of a preamplifier with a gain of $8mV{\cdot}fC^{-1}$ and noise of 55 equivalent noise charge (ENC), a $CR-RC^4$ shaping amplifier with a $5{\mu}s$ peak time, and an analog-to-digital converter (ADC) driver. The DAQ system has 65 mega-sample per second flash ADC, a self and external trigger, and a USB 3.0 interface. Results and Discussion: Characteristics such as the current-to-voltage curve, energy resolution, and electron mobility life-time products for CZT detectors are investigated. In addition, preliminary results of gamma ray imaging using 511 keV of a $^{22}Na$ gamma ray source were obtained. Conclusion: In this study, the DAQ system with a CZT radiation sensor was successfully developed and a PET image was acquired by two sets of the developed DAQ system.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.129-140
• /
• 2012

Smoke toxicity is the test for the toxicity evaluation of smoke and hazardous gas, caused by combustion of building materials and finishing materials. Smoke toxicity can be evaluated by the mean incapacitation time of mice. This test result can be influenced by the health status of mice and test condition. In acute inhalation toxicity test of hazardous gas, no typical clinical findings and histopathologic abnormalities were observed. Tracheitis and bronchitis as well as acute lung inflammation around terminal bronchiole in some mouse of the highest dose group. Through this study, we established the method for inhalation toxicity test of hazardous gas as well as the SOP of inhalation toxicity test. However, in the future studies, the concentration control methods for inhalation technologies on hazardous gas will be needed to improve continuously and also further studies on other gas inhalation toxicity will be needed to conduct.

• Journal of International Academy of Physical Therapy Research
• /
• v.5 no.1
• /
• pp.675-682
• /
• 2014

The objective of this study was to examine the effects of auditory biofeedback training and kicking training on walking times in patients with hemiplegia to determine if the effects of such training would be maintained even after stopping the intervention. Thirty hemiplegia patients were selected and randomly assigned to a control group of 10 patients to receive general exercise treatment; an auditory biofeedback training group of 10 patients to receive auditory biofeedback training, along with general exercise; and a kicking training group to receive kicking training, along with general exercise. All the patients received their respective training 12 times in total, three times per week for four weeks. In addition, all those in the control and experimental groups received the same general exercise treatment 12 times in total, three times per week for four weeks, and underwent follow-up tests thereafter. The patients' 10m walking times were measured using a stopwatch. The significance was analyzed using repeated-ANOVAs. In cases where there were interactions between measuring times and groups, in each group were examined using repeated-ANOVAs. In cases where there were differences, post-hoc tests were conducted using repeated of contrast test. The 10m walking times of the control and experimental groups were significant differences in 10m walking times were shown between measurement times(p<.05), and significant differences in the interactions between measuring times and groups were shown between the groups(p <.05). However, no significant differences in 10m walking times were shown between the groups(p>.05). The auditory biofeedback training group showed significant decreases in walking times four weeks after the beginning of the intervention(p<.05) and significant increases eight weeks after the beginning of the intervention(p<.05). The kicking training group showed significant decreases in walking time four weeks after the beginning of the intervention(p<.05) and maintained the walking times without showing any significant differences eight weeks after the beginning of the intervention(p>.05). The walking speeds of only the kicking training group were maintained until eight weeks after the beginning of the intervention.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.197-200
• /
• 2007

This study examined the conditions of filtration and concentration of methanol extract from biomass. Filtration efficiency was improved by adding diatomaceous earth as a filter aid. The optimal amount of diatomaceous earth was 6% (w/w) to reduce the filtration time. The filtration time was reduced by 4.2% in first extraction, 30.0% in second extraction, 22.8% in third extraction, and 19.0% in fourth extraction, respectively. The optimal temperature of water bath was below 50$^{\circ}C$ for preventing paclitaxel degradation during concentration of methanol extract using a rotary evaporator. The temperature of concentrated solution in rotary evaporator was relatively low compared to bath temperature because of latent heat of evaporation. The stopping point of concentration in rotary evaporator for the following step was at a specific gravity of 0.96 of the concentrated solution in terms of the purity and yield of paclitaxel. This information is very useful for mass extraction of biomass for the recovery of paclitaxel from plant cell culture.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.555-563
• /
• 2016

Line capacity of railways is a core criterion to decide maximum trips in accordance with traffic demand and a priority in railway investment to improve transportation capability. Particularly, because two operators will start revenue services in the HSR from mid-2016, the line capacity should be carefully calculated and controlled to avoid conflicts between the maximum number of KTXs, and the number needed to guarantee the effective competition of the operators. Meanwhile, there have been many arguments about calculating the line capacity, because this number is affected by the number of trips by train types, stopping pattern and dwell time in each station, journey time, crossing or passing, safety headway between trains, etc. To deal successfully with these kinds of problems, this study proposes a simulation method to calculate the line capacity that considers train operation according to the operator's service policies.

• Journal of radiological science and technology
• /
• v.45 no.2
• /
• pp.127-134
• /
• 2022

In order to overcome the image quality limitations of the conventional C-arm, a flat panel detector (FPD) is used to enhance spatial resolution, detective quantum efficiency, frame rate, and dynamic range. Three-dimensional (3D) visualized information can be obtained from C-arm computed tomography (CT) equipped with an FPD, which can reduce patient discomfort and provide various medical information to health care providers by conducting procedures in the interventional procedure room without moving the patient to the CT scan room. Unlike a conventional C-arm device, a C-arm CT requires different basic safety and essential performance evaluation criteria; therefore, in this study, basic safety and essential performance evaluation criteria to protect patients, medical staff, and radiologists were derived based on International Electrotechnical Commission (IEC) standards, the Ministry of Food and Drug Safety (MFDS) standards in Korea, and the rules on the installation and operation of special medical equipment in Korea. As a result of the study, six basic safety evaluation criteria related to electrical and mechanical radiation safety (leakage current, collision protection, emergency stopping device, overheating, recovery management, and ingress of water or particulate matter into medical electrical (ME) equipment and ME systems: footswitches) and 14 essential performance evaluation criteria (accuracy of tube voltage, accuracy of tube current, accuracy of loading time, accuracy of current time product, reproducibility of radiation output, linearity and consistency in radiography, half layer value in X-ray equipment, focal size and collimator, relationship between X-ray field and image reception area, consistency of light irradiation versus X-ray irradiation, performance of the mechanical device, focal spot to skin distance accuracy, image quality evaluation, and technical characteristic of cone-beam computed tomography) were selected for a total of 20 criteria.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.488-493
• /
• 2022

In manufacturing sites, bearing fault in eletrically driven motors cause the entire system to shut down. Stopping the operation of this environment causes huge losses in time and money. The reason of this bearing defects can be various factors such as wear due to continuous contact of rotating elements, excessive load addition, and operating environment. In this paper, a motor driving environment is created which is similar to the domestic manufacturing sites. In addition, based on the established environment, we propose a dataset for bearing fault detection by collecting changes in vibration characteristics that vary depending on normal and defective conditions. The sensor used to collect the vibration characteristics is Microphone G.R.A.S. 40PH-10. We used various machine learning models to build a prototype bearing fault detection system trained on the proposed dataset. As the result, based on the deep neural network model, it shows high accuracy performance of 92.3% in the time domain and 98.3% in the frequency domain.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1972.03a
• /
• pp.17.1-17
• /
• 1972

Hemophilia B is hereditary disorder of blood coagulation known as a deficiency of P.T.C. or Christmas factor. Anyway it's indistinguishable clinically with hemophia A and C. Here's one of most interesting problems gave us because we could only find it out as a hemophilia B. when we stood a situation to be met continuous bleeding from the operative wound of tonsillectomy and Adenoidectomy. Wintrobe proposed that easy bruising, difficulty in stopping the bleeding from razor cuts, and prolonged bleeding after tonsillectomy or tooth extraction usually are the major manifestations. For a long time little attention was paid to reports of a milder form of the diseases. In such cases coagulation time, and even prothrombin consumption were normal and the symptoms were correspondinly mild, small wounds as a rule giving little trouble and hemoarthrosis being uncommon. In our cases, there's no specific contributory history except nasal bleeding intermittently and also no specific contributory laboratory data before the operation. After the T. & A., there's continuous bleeding from nasopharynx and the coagulas on the both tonsilar fossas being grown day by day. Therefore we suspected some abnormality of coagulation mechanism and then we could get conclusion of hemophilia B. after various laboratory tests including T.G.T., As I know, this case, hemophilia B. is 3rd one as a report in Korea. We have no data of hemophilia family at present time, so that I propose that we have to make system of hemophilia family in Korea. In a next, we have to make routinely complete laboratory test, ego routine C.B.C., bleeding time, coagulation time, prothrombine time, partial thromboplastine time, before operation of T.& A. If we can solve these problems we can get the T. & A. without any problems of bleeding according to get the operation of T. & A.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.7 no.1
• /
• pp.38-53
• /
• 2001

The main purpose of this study was to present the basic materials that help the nursing of the infants and consultation of childcare by examinating the knowledge and practice of the mothers about the weaning diet. The data for this study was collected from 205 mothers with infants(6-36 months) who visited two hospitals or one university hospital in Seoul, who were living in one apartment Suwon area between July. 7. and September 10, 2000. The 57 questionnaires were used for collecting the data and SAS program was used to analyse the data. The results are as follows. 1. The items of low score in the result of the knowledge data were as follows. [Initial weaning time, the important nutritional problem in infant, considering factor during feeding, the relation of proper weaning food & age, the time of used by cup, to apply of proper spicies in weaning food, the time of completing weaning, the time of stopping weaning at abnormal sign, and the inappopriate reason of dry mixed powdered food (Sunsik) as a weaning food.] 2. Higher educated mothers presented more high score than lower educated mothers in the knowledge about the weaning. (p<0.05) 3. Before the weaning, more mothers were using the commercial milk (51.2%) than the breast milk (13.2%). 4. Mothers get the knowledge about the weaning from the infants care book of cook books(26.4%). 68% of mothers had not received any consulting service with regard to the weaning, 10.2% of them consulted Pediatrician about the weaning and 0.5% of them with nurse. 5. Most mothers began supplymentary food, from four to six months (65.4%). the ratio was about the same as the ratio of mothers who knEw the appropriate time for the introduction of supplymentary food(83.2%) 6. The main solid food was commercial food, not home-prepared food. 7. Higher educated mothers used home-prepared weaning food more often than lower educated mothers(P<0.05). 8. The used rate by spoon was 57.4%, but the rate of mother's knowledge data was 95.0%. 9. The time of completing the weaning was in 12-18 months(53.8%). It is similar to the mother's knowledge data(52.7%) Conclusion ; According to knowledge data, it turns out that most mothers know moderatly about the weaning (everage 60/100). However their knowledge and practice on the methods & procedures on the weaning were inadquate. Especially, most mothers did not consult with those qualification about the weaning. Therefore, the role of the nurse as a provider of information on the weaning should be emphasized with varied educational programs in many health care center.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.443-451
• /
• 2010

This paper proposes the methodology about advisory safety speed based on real-time vehicular data collected from highway. The proposed model is useful information to drivers by appling seamless wireless communication and being collected from ECU(Engine Control Unit) equipment in every vehicle. Furthermore, this model also permits the use of realtime sensing data like as adverse weather and road-surface data. Here, the advisory safety speed is defined "the safety speed for drivers considering the time-dependent traffic condition and road-surface state parameter at uniform section", and the advisory safety speed model is developed by considering the parameters: inter-vehicles safe stopping distance, statistical vehicle speed, and real-time road-surface data. This model is evaluated by using the simulation technique for exploring the relationships between advisory safety speed and the dependent parameters like as traffic parameters(smooth condition and traffic jam), incident parameters(no-accident and accident) and road-surface parameters(dry, wet, snow). A simulation's results based on 12 scenarios show significant relationships and trends between 3 parameters and advisory safety speed. This model suggests that the advisory safety speed has more higher than average travel speed and is changeable by changing real-time incident states and road-surface states. The purpose of the research is to prove the new safety related services which are applicable in SMART Highway as traffic and IT convergence technology.