• 한국지반환경공학회 논문집
• /
• 제2권3호
• /
• pp.71-80
• /
• 2001

쇄석말뚝-매트로 구성된 기초시스템은 지지력이 여러 인자에 의해 영향을 받게 되어 기초지반과 말뚝체의 상호작용을 정량적으로 평가하기에 어려움이 있다. 복합지반의 지지력은 말뚝-흙 경계면의 측방응력에 의해 발생되므로 쇄석말뚝의 거동을 규명하기 위해서는 경계면에서 발생하는 수평저항력에 영향을 미치는 인자들에 대한 평가가 필요하다. 또한, 말뚝간격과 근입비, 파괴각 등 기하학적 요인들도 영향을 미치는 것으로 알려져 있다. 따라서, 본 논문에서는 쇄석말뚝-매트로 구성된 기초시스템의 선단지지 단일말뚝과 군말뚝에 대한 실내모형실험을 통하여 쇄석말뚝의 한계깊이를 측정하고 파괴각에 영향을 미치는 인자들을 평가하였다. 또한, 실내실험결과를 이론식과 비교하였으며 유한요소해석을 통해 파괴거동을 평가하여 실내모형실험의 타당성을 검증하였다.

• 대한치과기공학회지
• /
• 제35권1호
• /
• pp.29-35
• /
• 2013

Purpose: The purpose of this study was to evaluate the validity of digital models fabricated by dental scannable stone. Methods: Twenty same cases of stone models(maxillary full arch) were manufactured. Intercanine distance, intermolar distance, two dental arch lengths(right, left), two diagonal of dental arch lengths(right, left) were measured for comparison. Each of ten stone models were measured by digital vernier calipers and scanned by dental scanner. Ten digital models were measured by CAD program. The mean(SDs) values were compared by a Mann-Whitney U test(${\alpha}$=0.05). Results: No statistically significant differences between the two groups were found at intermolar distance, dental arch length(right)(p>0.05). However, intercanine distance, dental arch length(left) and two diagonal of dental arch lengths(right, left) were statistically significant(p<0.05). Conclusion: Stone models fabricated by dental scannable stone showed larger than digital models.

• 지구물리
• /
• 제7권1호
• /
• pp.31-40
• /
• 2004

문화재 특히 석조구조물을 조사 할 경우에 원형 및 상태를 보존하는 것은 매우 중요하다. 석조구조물에 대한 조사 결과의 효율적인 평가를 위해서는 동적특성을 고려하여야만 한다. 석조구조물의 동적특성을 마찰 접촉조선 석층수 등의 요인에 의한다 이러한 요소는 동적해석결과로부터 추정할 수 있다. 본 연구는 압축력을 받고있는 전통적인 홍예교의 고유 진동수 결정 방법에 관한 연구결과이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1378-1385
• /
• 2008

The probability of landslide hazards was predicted to natural terrain around the stone relics of Jinjeon-saji area, which is located in Yangyang, Kangwon Province. As the analysis results of field investigation, laboratory test and geology and geomorphology data, the effect factors of landslides occurrence were evaluated, and then the landslides prediction map was made up by use of prediction model considering the effect factors. The susceptibility of stone relics induced by landslides was investigated as the grading classification of occurrence probability using the landslides prediction map. In the landslides prediction map, the high probability area of landslides over 70% of occurrence probability was 3,489m3, which was 10.1% of total prediction area. If landslides are occurred at the high elevation area, the three stories stone pagoda of Jinjeon-saji (National treasure No.122) and the stone lantern of Jinjeon-saji (Treasure No.439) will be collapsed by debris flow.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.331-338
• /
• 2001

Seismic performances of the base isolated model of Five Story Stone Pagoda were studied through shaking table tests. Friction pendulum system (FPS), Pure-friction system with laminated rubber bearing (LRB) and Ball with rubber bearing were selected fur the comparison of performances. Performances of specially designed isolation systems were tested dynamically using shaking table. The test results of isolated model are compared with those of fixed base model. Compared with fixed base model, the isolated model showed that it could withstand much higer intensity of earthquake motion. The Effective Peak Ground Acceleration (EPGA) value of isolated model when the top component tipped over was above twice of that value in case of fixed base model. According to the additional test results, the lower value of coefficient of friction than that of common frictional base isolation systems is more effective to protect the piled multi-block system of Pagoda against moderate intesity of ground motion.

• Geomechanics and Engineering
• /
• 제13권2호
• /
• pp.255-267
• /
• 2017

Soft clay strata can suffer significant settlement or stability problems under building loads. Among the methods proposed to strengthen weak soils is the application of a stone masonry trench (SMT) beneath RC strip foundations (as a masonry pad-stone). Although, SMTs are frequently employed in engineering practice; however, the effectiveness of SMTs on the ultimate bearing capacity improvement of a strip footing rested on a weak clay stratum has not been investigated quantitatively, yet. Therefore, the expected increase of bearing capacity of strip footings reinforced with SMTs is of interest and needs to be evaluated. This study presents a two-dimensional numerical model using the discrete element method (DEM) to capture the ultimate load-bearing capacity of a strip footing on a soft clay reinforced with a SMT. The developed DEM model was then used to perform a parametric study to investigate the effects of SMT geometry and properties on the footing bearing capacity with and without the presence of surcharge. The dimensions of the SMTs were varied to determine the optimum trench relative depth. The study showed that inclusion of a SMT of optimum dimension in a soft clay can improve the bearing capacity of a strip footing up to a factor of 3.5.

• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.103-111
• /
• 2012

In this study, the full-scale laboratory model test on utilization of recycled aggregates and crushed stone as vertical drains to use an alternative material of sand in soft ground is performed. The settlement and pore water pressure were measured to evaluate the discharge capacity and filed application, and the results were compared and analyzed through the finite element method. The measured and estimated settlement in all vertical drain materials decreases gradually with the load increase. The measured settlement 6.55~8.63 mm, and the estimated by the Hyperbolic model was 7.45~7.92 mm. So the model used for the analysis can be applied to the settlement estimation of the actual field. The variations of pore water pressure with time showed constantly regardless of the load in all vertical drainage materials. The pore water pressure was similarity to that of sand after rapid drawdown. Therefore, it was applicable to the field because discharge capacity was enough to be an alternative material to the sand which had been being used as the vertical drains.

• 한국농공학회논문집
• /
• 제52권6호
• /
• pp.111-123
• /
• 2010

In this study, laboratory model test on utilization of recycled aggregates and crushed stone as horizontal drains to use alternative material of sand in soft ground is practiced. The coefficient of permeability of the recycled aggregates and crushed stone showed largely 1.2~5.1 times and 2.0~3.3 times greater than sand, respectively. The horizontal coefficient of permeability in case of installing the horizontal perforated drain pipe showed largely 1.9~6.8 times more than the case of not installing. The drainage distance showed 1.7~1.8 times greater than sand. When a degree of consolidation is 90 %, there is no delay of consolidation in SCP and PVD improvement sections. Therefore, it is proven that the field applicability is excellent. Also, the suitable quality management criterion is presented to make use of a horizontal drains in soft ground on the basis of analysis of the physical and environmental characteristics.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.715-723
• /
• 2017

이 연구에서는 고성능 시멘트 복합체의 잔골재 일부를 석분으로 대체하여 사용할 경우 재료의 성질 변화를 실험을 통해 살펴보았으며, 실험결과와 입도분포 특성과의 연관성을 여러 가지 모델들을 이용하여 분석하였다. 잔골재 중량 대비 0~30% 범위에서 석분을 치환한 시멘트 모르타르에 대해 유동성, 레올로지 특성, 강도 시험을 실시하였으며, 그 결과 석분 사용량이 증가함에 따라 유동성이 향상되고, 레올로지 정수(항복응력 및 소성점도)값이 감소하며, 압축강도 및 휨인장강도가 향상되는 것으로 나타났다. 이와 같은 실험결과는 모르타르를 구성하는 고체 입자들의 충전밀도와 밀접한 관련이 있으므로 최대 충전밀도를 얻기 위한 최적 입도분포 모델을 이용하여 그 영향을 분석하였다. 석분 사용량이 증가함에 따라 입자들의 입도분포가 최대 충전밀도를 얻기 위한 최적 입도분포에 더 가까워짐을 확인할 수 있었으며, 평균제곱근 오차를 이용하여 정량적으로 최적화 정도를 비교하였다. 석분 사용을 통한 입도분포 개선이 유동성의 향상과 소성점도의 감소, 그리고 강도의 향상에 미치는 영향은 관련한 여러 모델들을 이용하여 제시하였으며, 항복응력의 감소는 석분 사용에 따른 평균입경 크기의 증가와 관련이 있음을 보였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.291-311
• /
• 2006

The acceleration of consolidation by stone columns was mostly analysed within the framework of a basic unit cell model (i.e. a cylindrical soil body around a column). A method of converting the axisymmetric unit cell into the equivalent plane-strain model would be required for two-dimensional numerical modelling of multi-column field applications. This paper proposes two practical simplified conversion methods to obtain the equivalent plane-strain model of the unit cell, and investigates their applicability to multi-column reinforced ground. In the first conversion method, the soil permeability is matched according to an analytical equation, whereas in the second method, the column width is matched based on the equivalence of column area. The validity of these methods is tested by comparison with the numerical results of unit-cell simulations and with the field data from an embankment case history. The results show that for the case of linear-elastic material modelling, both methods produce reasonably accurate long-term consolidation settlements, whereas for the case of elasto-plastic material modelling, the second method is preferable as the first one gives erroneously lower long-term settlements, where plastic yielding of stone column are ignored.