• 대한기계학회논문집B
• /
• 제37권8호
• /
• pp.733-741
• /
• 2013

본 논문은 대형 상용기관을 모사한 정적연소실에서 매립지 가스의 연소 특성에 대한 복수의 논문 중 첫 논문으로, 연소특성을 연소화학양론 및 열역학적 측면에서 분석하고 이를 실험 결과와 비교하였다. 연소화학양론 및 열역학적 분석에서 연료조성과 당량비에 따라 기연가스의 조성이 변화하고 이에따라 정적비열이 변화하여 동일 발열량에 최종압력은 변화하며, 이것은 실제 연소압력 측정결과와 대체로 일치한다. 연료조성과 당량비에 따른 상대적 압력변화 및 연소기간도 분석결과와 실험결과가 경향상 일치한다. 분석과 실험 결과 사이의 차이는 열전달량의 차이에 기인한 온도저하 및 이에 따른 정적비열의 변화가 주요 원인이며, 연소실 체적과 점화위치도 연소기간과 온도에 큰 영향을 준다. 최종적으로 정적연소에서 연료변환효율은 메탄 분율이 작을수록 그리고 당량비 0.8 ~ 0.9 사이에서 최대가 되며, 이러한 연료변환효율의 증가는 실물기관에서 비열비 감소의 효과를 상쇄하고 남으므로 순수 메탄보다 LFG의 연소가 효율 면에서 유리하다.

• 대한화학회지
• /
• 제60권5호
• /
• pp.327-341
• /
• 2016

This study explores the effective visual resources in the “regularity in chemical reactions” unit of ninth grade science textbooks (2009 revised version). The frequency and role of visual resources were initially examined, and the students’ perceptions of visual resources were investigated. The results of the analysis represented the learning material presentation (68%), motivational categories (14%), guide to inquiry procedures (9%), and inquiry results and summaries (8%). According to the investigation of the students’ perceptions of visual resources, the most effective visual resource for motivation is a photograph depicting physical and chemical changes, such as in bread baking and the most effective for learning material presentations in mass conservation, definite proportion, and stoichiometric concept units were a cartoon, graph, and formula representing stoichiometric phenomena, respectively. The most effective resource for guide to inquiry (experimental) procedures were photographs of both instruments and sequential experiment processes; and in the inquiry results and summary category, incomplete tables and graphs for students to work on themselves. The aims of this research are to increase the usefulness of visual resources in the teaching-learning activity and provide informative supplements for the development and improvement of visual resources, according to the students’ perceptions.

• 대한기계학회논문집
• /
• 제11권1호
• /
• pp.177-188
• /
• 1987

본 논문에서는 연소기체의 열력학적 평형조성 계산을 위한 수식을 Gibbs의 자 유에너지 최소화법에 의하여 유도하고 이를 컴퓨터 프로그램화하여, Table 1의 특성을 지닌 연료에 대하여 ⅰ) 연소공기량에 따른 평형조성 및 단열불꽃온도, ⅱ) 연소온도 변화에 따른 평형조성의 변화를 계산함으로써 연소기체의 생성기구를 열력학적으로 해 석하였다.

• 한국연소학회지
• /
• 제17권3호
• /
• pp.1-8
• /
• 2012

The CO emission characteristics of interacting hydrogen and methane partially premixed flames were numerically investigated. A counterflow geometry was introduced to establish interacting two partially premixed flames. An one-dimensional OPPDIF code was used to simulate the interacting flames. The GRI-v3.0 was used to calculate the chemical reactions. Emission index for CO(EICO) was evaluated to quantify the CO emitted from the interacting flames. The global strain rate and equivalence ratios for each flame(${\Phi}_{CH_4}$ and ${\Phi}_{H_2}$) were used as parameters to control the extent of interaction between two partially premixed flames. When ${\Phi}_{CH_4}$ was kept to stoichiometric condition and ${\Phi}_{H_2}$ was at rich condition, unburned H2 species of hydrogen flame was transported to the methane flame and affected reactions related with CO formation. When ${\Phi}_{CH_4}$ increased from a stoichiometry to rich condition while ${\Phi}_{H_2}$ was kept to stoichiometric condition, EICO increased initially, had a peak value at ${\Phi}_{CH_4}=1.5$ and decreased gradually. This could be elucidated with an analysis for the elementary reactions related with CO formation.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.21-26
• /
• 2004

Characteristics of laminar lifted names in coflow jet with various coflow velocities have been studied experimently. USlI1g the fuel nozzle with d=0.254 for the pure propane, liftoff heights are fitted by using power equation with jet velocity. As coflow velocity increases up to 60 cm/s powers of fitting equation steeply decrease. From the result of numerical analysis using the FLUENT, the stoichiometry contour and the axial velocity nondimensionalized by initial jet velocity along the stoichiometry contour are changed with variations of coflow velocities, The change of axial velocity along stoichiometric contour is more sensitive than that of stoichiometric contour, For this reason, powers of fitting equation for liftoff height with jet velocity decreases with the increase of coflow velocity. Using the fuel nozzle with d=4,35 mm for the highly diluted propane by nitrogen, the liftoff height increases with the increase of coflow velocity when coflow velocity is less than the maximum value of initial jet velocity. But when coflow velocity is faster than that, the liftoff height decreases with the increase of coflow velocity.

• 한국연소학회지
• /
• 제16권2호
• /
• pp.23-32
• /
• 2011

To investigate cell formation in hydrocarbon/hydrogen/carbon monoxide-air premixed flames, the outward propagation and cellular instabilities were experimentally studied in a constant pressure combustion chamber at room temperature and elevated pressures. Unstretched laminar burning velocities and Markstein lengths of the mixtures were obtained by analyzing high-speed schlieren images. In this study, hydrodynamic and diffusional- thermal instabilities were evaluated to examine their effects on flame instabilities. The experimentally-measured unstretched laminar burning velocities were compared to numerical predictions using the PREMIX code. Effective Lewis numbers of premixed flames with methane addition decreased for all of the cases; meanwhile, effective Lewis numbers with propane addition increased for lean and stoichiometric conditions and increased for rich and stoichiometric cases for hydrogen-enriched flames. With the addition of propane, the propensity for cell formation significantly was diminished, whereas cellular instabilities for hydrogen-enriched flames were promoted. However, similar behavior of cellularity was obtained with the addition of methane to the reactant mixtures.

• Advances in concrete construction
• /
• 제8권2호
• /
• pp.127-137
• /
• 2019

Roller Compacted Concrete (RCC) is a zero slump concrete consisting of a mixture of cementitious materials, sand, dense graded aggregates and water. In this study, an attempt has been made to investigate the effect of aggregate type on strength and abrasion resistance of RCC made by using granulated blast furnace slag (GGBS) as partial replacement of cement. Mix proportions of RCC were finalized based upon the optimum water content achieved in compaction test. Two different series of RCC mixes were prepared with two different aggregates: crushed gravel and limestone aggregates. In both series, cement was partially replaced with GGBS at a replacement level of 20%, 40% and 60%. Strength Properties and abrasion resistance of the resultant mixes was investigated. Abrasion resistance becomes an essential parameter for understanding the acceptability of RCC for rigid pavements. Experimental results show that limestone aggregates, with optimum percentage of GGBS, perform better in compressive strength and abrasion resistance as compared to the use of crushed gravel aggregates. Observed results are further supported by stoichiometric analysis of the mixes by using basic stoichiometric equations for hydration of major cement compounds.

• 한국분무공학회지
• /
• 제25권4호
• /
• pp.170-177
• /
• 2020

Stoichiometric combustion in spark ignition (SI) engines has an advantage of meeting future stringent emission regulations. However, the drawback of the combustion is a lower thermal efficiency than that of lean burn. In this study, energy losses in a natural gas stoichiometric SI engine generator were analyzed to establish a strategy for improving the generating efficiency (GE). The energy losses were investigated based on dynamometer and load bank experiments. As the intake manifold pressure increased in the dynamometer experiment, the brake thermal efficiency (BTE) increased mainly due to the reduction in the pumping and mechanical losses. In the load bank experiment, the generating power and GE increased with the increased intake manifold pressure. The generating power and GE were lower than the brake power and BTE due to the cooling fan power and the losses in the generator.

• 한국결정성장학회지
• /
• 제20권2호
• /
• pp.93-100
• /
• 2010

X-선 회절 분석방법을 통해 biphasic calcium phosphate(BCP) 분말의 Ca/P 몰 비율을 확인하고 특성을 평가하였다. 다양한 화학 양론적인 Ca/P 몰 비율을 가지는 BCP 분말은 공침반응 및 하소과정을 통해 합성하였다. 1.5에서 1.67의 Ca/P 몰 비율을 가지는 분말의 조성은 초기 출발물질의 Ca/P 몰 비율, pH 10에서의 공침 과정 및$900^{\circ}C$ 열처리에 의해 정해졌다. 화학 양론적 Ca/P 몰 비율을 가지는 BCP 분말의 구조, 형상 및 화학적 특성평가는 XRD의 상-정량 확인 분석을 바탕으로 주사전자현미경 및 유도 결합 플라즈마 분광분석기와 함께 수행 하였다. BCP 분말의 용해도는 $36.5^{\circ}C$ 및 pH 7.4 의 phosphate buffer solution(PBS)에서 특성평가 하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.499-502
• /
• 2004

Groundwater chemistry in a coastal region having complex contaminant sources was investigated. Water analysis data for 197 groundwater samples collected from the uniformly distributed sixty-six wells were used. Chemical analysis rand results indicate that groundwaters show wide concentration ranges in major inorganic ions, reflecting complex hydrochemical processes of pollutants. Due to the complexity of groundwater chemistry, Results illustrate that thirty five percent of the wells do not fit for drinking based on nitrate and chloride concentration in the study area. the samples were classified into four groups based on Cl and NO$_3$ concentrations and the processes controlling water chemistry were evaluated based on the reaction stoichiometry. The results explained the importance of mineral weathering, anthropogenic activities (nitrification and oxidation of organic matters), and Cl-salt inputs (seawater, deicer, NaCl, etc.) on groundwater chemistry. It was revealed that mineral dissolution is the major process controlling the water chemistry of the low Cl and NO$_3$ group (Group 1). Groundwaters high in NO$_3$ (Groups 2 and 4) are acidic in nature, and their chemistry is largely influenced by nitrification, oxidation of organic matters and mineral dissolution. In the case of chloride rich waters (Group 3), groundwater chemistry is highly influenced by mineral weathering and seawater intrusion associated with cation-exchange reactions.