석유화학공정에서 발생하는 폐촉매는 바나듐, 몰리브덴, 니켈, 코발트와 같은 희유금속을 함유하고 있다. 유기산에 의한 상기 금속의 침출에 대해 연구하였다. 본 논문에서 사용한 유기산에 의한 금속의 침출률은 옥살산 > 타르타르산 > 구연산 > 말레산 > 오스코브르산 순서이었다. 상기 유기산은 바나듐과 몰리브덴의 침출에 선택성이 있으며 옥살산에 의한 침출률이 가장 높았다. 옥살산의 농도, 반응온도, 광액밀도, 교반속도를 변화시켜 옥살산에 의한 바나듐의 최적침출조건을 얻었다. 옥살산에 의한 바나듐의 침출에 대한 속도식을 조사한 결과 Avrami식과 잘 맞았으며 활성화에너지는 8.76 kJ/mol로 물질전달에 의해 침출반응이 율속되었다.
출발물질로 $BaCl_2$와 $TiCl_4$를 사용하고 침전제로 dimethyl oxalate(DMO)를 사용하여 균일침전법에 의해 barium titanyl oxalate(BTO)를 제조하였다. 반응조건을 변화시켜 가면서 실험을 수행한 결과 반응 온도가 높을수록, [DMO]/[$Ba^{2+}+Ti^{4+}$]의 비율이 증가할수록 핵 형성시간이 단축되었으며 BTO 입자가 unimodal에서 bimodal을 거쳐 넓은 범위의 unimodal로 전환하는 속도가 빨랐다. 균일침전법으로 얻은 BTO를 $900^{\circ}C$에서 하소하여 얻은 barium titanate(BT)의 입자 크기는 통상의 공침법으로 합성한 BT 입자보다 큰 형태를 나타냈으며, 결정상은 tetragonal이었다. 또한 교반이 BTO 및 BT 분말의 특성에 큰 영향을 줌을 발견하였다.
The objective of this study was to make a SBR+MBR complex process to evaluate the possible use of the advanced water treatment system for ships (SBR+MBR complex process) in accordance with the amendments MAPOL 73/78 that went into effect. The conditions 1 and 2 did not show the quick reduction in anaerobic condition while in the precipitation and stirring stages of the SBR treatment which was determined to be ineffective denitrification, same as with the ORP. Removal of organic matters such as $BOD_5$ and $COD_{Cr}$ in the SBR treatment was observed to happen smoothly and going through the MBR treatment as well would provide a stable water quality. However, the results were not satisfactory in accordance with $BOD_5$ 25 mg/L and $COD_{Cr}$ 125 mg/L. Thus, the operating conditions improvement is deemed necessary. Likewise for the nutrients (T-N and T-P), the nitrification in bioreactor, denitrification and phosphorus absorption in aerobic tank due to phosphorus release in anaerobic tank had not been proceeded effectively. It was concluded that the improved operating conditions and structural changes would provide more effective treatments since the removal rates of T-N and T-P were less than 70% and 80%, respectively, which were standards specified by the MEPC. 227(64).
구강내의 교정 장치는 미생물 전파에 있어서 다양한 장소를 제공한다. 치태는 치아 우식증 발생에 있어 매우 큰 역할을 하며 미생물, 비세포성 물질로 구성되어 있다. 본 연구의 목적은 생체외에서 교정용에서의 인공 치태 생성에 영향을 주는 요인을 평가하는 것이다. Streptococcus mutans type c는 $CO_2$ incubator내의 $37^{\circ}C$에서 brain heart infusion broth에서 배양 되었다. 중절치에 사용하는 9개의 $.018"{\times}.025"$ standard edgewise brackets을 3개씩 비이커의 배양액에 매달았다. 3개 비이커의 배양액 pH는 각 각 pH 5.5, 7.0 그리고 8.5로 조절되었다. 5시간 후에 비이커에서 각각의 bracket을 꺼내서, bracket의 평균 무게를 측정하였다. 배지의 stirring effect를 측정하기 위하여 3개씩 $.018"{\times}.025"$ standard edgewise brackets을 2개의 비이커에 위치시켰다. 12개의 brackets을 $CaCl_2$(0.25, 1.0, 4.0 그리고 16.0mM). KCl(2.5, 10, 40 그리고 160mM) 그리고 $MgCl_2$(0.1, 0.4, 1.6, 그리고 6.4mM) 용액에 각각 매달았다. 6개의 $.018"{\times}.025"$ standard edgewise brackets, 6개의 $.022"{\times}.028"$ Roth brackets과 6개의 $.022"{\times}.028"$ Broussard brackets을 각각의 비이커 내에 매달았다. 배양액 내에서 5시간 동안 배양한 후 각각의 brackets을 근사값의 milligram 단위로 측정하였다. 그룹 사이의 차이는 Mann-Whitney와 Kruskal-Wallis tests를 이용하여 비교하였다. p value<0.05의 조건에서 이들의 차이는 통계학적 유의성을 갖는다. 5시간 동안 pH 5.5에서 배양된 Streptococcus mutans에 의해 형성된 인공 치태는 pH 7.0 이나 pH 8.5에서 배양된 것보다 작았다(p<0.05). 인공 치태는 배양하는 동안 저어졌을 때 더 많이 형성되었다(p<0.05). 결론적으로 bracket에 형성된 인공 치태는 좀 더 높은 알칼리성 배지에서 배양됨으로써, 그리고 배양 동안 배지를 저어줌으로써 유의성있게 증가하였다. 그러나 배지의 $CaCl_2,\;KCl,\;MgCl_2$의 농도와 상업적으로 다른 종류의 이용 가능한 교정용 bracket에 대해서는 유의한 차이가 없었다.
SPG (Shirasu porous glass) 관형 막이 설치된 회분식 막유화 장치를 사용하여 이온성 약물이 담지된 단분산 polycaprolactone (PCL) 마이크로캡슐을 제조하기 위한 막유화 공정변수의 최적조건을 결정하였다. 마이크로캡슐에 담지된 이온성 약물로는 양이온성인 lidocaine-hydrochloride, 중성인 sodium salicylate와 음이온성인 4-acetaminophen의 3가지를 사용하였으며, PCL 마이크로캡슐로부터 이들 모델약물의 방출거동을 검토하였다. 캡슐제조에 사용된 PCL의 농도와 분자량, 막간 압력차, 분산상과 연속상에 첨가시킨 유화제의 농도, 연속상의 교반속도가 막유화법으로 제조된 PCL 캡슐의 크기와 크기분포에 미치는 영향을 검토하였다. 이들 공정변수의 조절을 통해 평균 크기 약 $5\;{\mu}m$의 균일한 마이크로캡슐을 제조할 수 있었다. 약물 방출실험 결과 산성조건에서 알칼리조건으로 방출환경이 변화됨에 따라 약물 방출속도가 증가하였다.
This study was performed to define the physicochemical characteristics of food waste and food wastewater, and to find the effect of salinity variation experiment, the samples of 1, 2, 3 and 4 were prepared by the salinity of 1.0%, 1.5%, 2.0% and 2.5%, respectively. In experiment, aerobic composting reactors were operated by the model which was composed of half an hour's stirring and 2 hour's aeration per day, for 45 days. Seeds of vegetables of Chinese cabbage and red pepper were seeded at compost-free control, compost 1, 2, 3 and compost 4 for the sake of investigation of germination rate and growth rate of those. The followings are the conclusions that were derived from this study. 1. In food waste, the moisture content was 60%, organic compound content was 95%, total carbon was 47.5%, total nitrogen was 1.6%(therefore, C/N ratio was 30). The values of pH were 4.0 and 3.8 the values of salinity were 0.9% and 1.2%, and the values of conductivity were 7.8 mS/cm and 18.0 mS/cm, respectively. 2. In salinity experiment, the reduction rate of volume was increased(40%) when the salinity was decreased(1.0%). Also, the reduction rate of mass was increased(52%) when the salinity was decreased(1.0%). This fact denotes that salinity hinders the process of composting. 3. Germination rate and growth rate of Chinese cabbage are more excellent than those of red pepper(97.14%, 5.2:2.5 cm). 4. In Chinese cabbage, germination rate and growth rate at compost with the lowest salinity are more excellent than those at compost-free control(97:94%, 5.2:4.5 cm).
Currently, the application of $TiO_2$ photocatalyst has been focused on purification and treatment of wastewater. However, the use of conventional $TiO_2$ slurry photocatalyst results in disadvantage of stirring during the reaction and of separation after the reaction. And the usage of artificial UV lamp has made the cost of photocatalyst treatment system high. Consequently, we studied that solar light/$TiO_2$ film system was designed and developed in order to examine disinfection characteristics of sewage wastewater treatment. The optimum conditions for disinfection such as solar light intensity, characteristic of sewage wastewater, amounts of $TiO_2$ and comparison of solar ligth/$TiO_2$ systems with UV light/$TiO_2$ system was examined. The results are as follows: (1) photocatalytic disinfection process with solar light in the presence of $TiO_2$ film more effectively killed total coliform (TC) than solar light or $TiO_2$ film absorption only. (2) The survival ratio of TC and residual ratio of organic material (BOD, CODcr) decreased with remain resistant material. (3) The survival ratio of TC and residual ratio of organic material (BOD, CODcr) decreased with the increase of amounts of $TiO_2$. (4) TC survival ratio decreased linearly with increasing UV light intensity. (5) The disinfection effect of solar light/$TiO_2$ slurry system decreased more than UV light/$TiO_2$ film systems. (6) The disinfection reaction followed first-order kinetics. We suggest that solar light instead of using artificial UV light was conducted to investigate the applicability of alternative energy source in the disinfection of TC and the degradation of organic material.
The floc formation, breakage and reformation of humic acid by inorganic (alum and PAC) and organic coagulants (cationic polyelectrolytes) at several conditions (pH, ionic strength and floc breakage time) were examined and compared among the coagulants at different conditions using a continuous optical monitoring method, with controlled mixing and stirring conditions. For alum, the shapes of formation, breakage and reformation curves at different pH (5 and 7) were different, but the shapes and the sizes of initial floc and reformed floc were nearly the same in the absence and presence of electrolytes at pH 7. For PAC, similar shapes of the curves were obtained at different pH and ionic strength, but the sizes were different, except for those of reformed flocs at different pH. However, for these coagulants, reformed flocs after floc breakage, occurred irreversibly for all the conditions used in this study. For organic coagulants, the time to attain the initial plateau floc size, the extent of floc strength at high shear rate and reversibility of reformed floes were different, depending floc formation mechanism. Especially, for the cationic polyelectrolyte forming humic flocs by charge neutralization or electrostatic patch effect mechanism, reformed flocs occurred reversibly, regardless of pH and floc breakage time, but occurred irreversibly in the presence of electrolytes.
The objective of this research was to investigate the effects of soaking time (6, 12 and 24 hr) and steeping temperature (25, 30 and $35^{\circ}C$) on germination time, germination percentage and weight loss of wheat and barley. Changes in chemical composition (such as protein, fat, and ash), reducing sugar content, enzyme activity and pasting profile and GABA ($\gamma$-animobutyric acid) content of germinated wheat and barley were also evaluated. The results clearly suggest that the short soaking time and lower steeping temperature significantly decreased germination time and weight loss, while germination percentage increased. Regarding the chemical composition, the protein content of wheat and barley was slightly increased after germination but there was no significant difference in content of crude fat and ash of both germinated cereals. The reducing sugar content of both germinated cereals decreased as the steeping temperature increased from $25^{\circ}C$ to $35^{\circ}C$. Increasing soaking time and steeping temperature led to increased amylase activity, and also corresponded to reduced paste viscosity. The highest GABA content that occurred with soaking times of 6 and 12 hr and a steeping temperature of $35^{\circ}C$ was 1,467.74 and 1,474.70 ${\mu}g/g$ for germinated wheat and 2,108.13 and 1,691.85 ${\mu}g/g$ for germinated barley. This study indicated that the optimum germination process for wheat and barley is a low steeping temperature and a short soaking time.
나노입자를 이용하여 강화 효과를 높이기 위해서는 고분자 기지 내부의 균일한 분산 상태를 확보하여야 한다. 또한 균일분산 조건 확보 후 균일 분산상태를 증명할 평가자료가 필요하다. 본 연구는 에폭시 수지와 SiC 나노입자를 혼합한 SiC/에폭시 복합 수지를 제조할 경우 커패시턴스 측정법을 이용한 강화재 분산도 예측 연구를 진행하였다. 커패시턴스는 전기용량을 의미하며 측정 재료의 내부 전하량과 비례한다. 기존 에폭시 수지에 비해 나노 SiC 입자를 함유할 경우 전하량이 증가되는 이론을 바탕으로 구간별 커패시턴스 측정에 따른 분산도 평가를 진행하고, 커패시턴스 분산도 예측방법에 대한 타당성을 FE-SEM과 물리적 강도 증가 방법으로 평가하였다. 소니케이션 분산 방법과 교반기 분산 방법을 이용하여 분산 방법에 따른 SiC 나노입자 분산도 상태를 비교하였다. 인장강도와 커패시턴스 간의 상관관계가 있었으며, 파단면에 대한 비교를 할 때 분산성 향상에 대한 차이를 확인할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.