• 대한환경공학회지
• /
• 제31권12호
• /
• pp.1075-1080
• /
• 2009

혐기성 소화 시 산발효 단계에서 지질 성분이 부분적으로 분해되고 지질 내 이중 결합이 포화됨을 통해 후단의 메탄발효 효율이 향상됨이 보고된 바 있다. 본 연구에서는 혐기성 연속 회분식 반응조(anaerobic sequencing batch reactor, 이하 ASBR) 및 연속 흐름 교반 반응조(continuously stirred tank reactor, 이하 CSTR) 형태의 산생성조를 각각 운전하여 지질 분해 및 독성 저감 효율을 살펴보았다. 기질로는 두 가지 불포화(oleate and linoleate), 두 가지 포화(palmitate and stearate) 지방산(long-chain fatty acids, 이하 LCFA)로 구성된 LCFA 혼합물을 사용하였다. 반응조 내의 높은 미생물 보유량에 의해 ASBR이 수리학적 체류시간(hydraulic retention time, 이하 HRT) 12 hr 이하에서 우월한 성능을 보였다. HRT 9시간에서 ASBR은 36.7%의 LCFA 분해, 14.3%의 이중결합 포화, 43.8%의 산생성 효율을 보였으며, 이는 HRT 15시간의 CSTR 보다 각각 19%, 10%, 21% 높은 수치였다. 지질 함유 폐수의 혐기성 소화 시 ASBR을 이용한 산발효가 효과적일 것으로 판단된다.

• KSBB Journal
• /
• 제15권1호
• /
• pp.88-95
• /
• 2000

5%(w/v)의 설탕과 2.5%(w/v)의 녹말로 구성된 혼합기질용액을 1.5 mL/min으로 공급하였을 때 dextransucrase와 $\alpha$-amylase의 혼합효소를 함께 고정화한 비드를 이용한 방법이 두 효소를 띠로 고정화한 비드를 혼합한 방법보다 올리고당 수율이 충전형 반응기에서는 12%, 교반형 반응기에서는 11% 높았다. 혼합효소를 함께 고정화한 비드를 200시간 이상 사용하였을 경우 교반식 반응기에서는 파괴되었으나, 충전형 반응기에서는 안전하였다. 따라서 올리고당을 연속적으로 생산하는데는 충전형 반응기가 더 적합하였다. 충치균인 S. mutans를 새로운 구조의 올리고당이 함유된 배치에서 배양하였을 때 pH가 5이하로 떨어지지 않았다. 식중독균인 S. aureus를 새로운 구조의 올리고당이 첨가된 배치에서 배양한 결과, glucose와 설탕이 첨가된 배치보다 균 성장정도가 현저히 떨어졌다.

• 한국응용과학기술학회지
• /
• 제19권1호
• /
• pp.33-42
• /
• 2002

Copolymerization of ${\alpha}$-Methylstyrene(AMS) with Acrylonitrile(AN) was carried out with benzoylperoxide(BPO) as an initiator in toluene at $80^{\circ}C$ in a continuous stirred tank reactor. Reaction volume and residence time were 0.6 liters and 3 hours, respectively. The monomer reactivity ratios, $r_{AMS}$ and $r_{AN}$ determined by both the Kele$T{\"{u}}d\"{o}s$ method and the Fineman-Ross method were $r_{AMS}$=0.16(0.14), $r_{AN}$=0.04(0.06). The cross-termination factor ${\Phi}$ of the copolymer over the entire AMS composition ranged from 0.75 to 0.92. The ${\Phi}$ factors of poly(AMS-co-AN) were increased with increasing AMS content. The simulated conversions and copolymerization rates were compared with the experimental results. It was observed that the average time to reach dynamic steady-state was three times the residence time.

• 상하수도학회지
• /
• 제23권5호
• /
• pp.517-526
• /
• 2009

This research has been conducted to investigate the characteristics of hydraulic behavior within the PAC contactor, the rectangular shape sedimentation basin without inclined tube and the other one with inclined tube those are parts of demonstration plants(capacity : $2,000m^3/d$) in Korea Institute of Water and Environment. As results of tracer tests, the flow within PAC contactor was evaluated to divided into plug flow and dead space distinctly, and characteristics of dead space was close to that of CSTR(Complete/continuous Stirred Tank Reactor). Also, considering Reynolds number, Froude number, Morill, Modal, NCSTR Inex and plug flow/mixed flow fraction, in the case of the rectangular shape sedimentation basin without inclined tube, the characteristics of flow pattern was close to CSTR. On the other hand, in the case of the basin with inclined tube, the region of CSTR decreased precisely compared with the case of no-tube. Until now we have recognized that the inclined hydraulic structure just reduces the surface loading rate within a sedimentation basin. Actually besides, the inclined structure have an important effect on the hydraulic behavior within the basin.

• 한국미생물·생명공학회지
• /
• 제19권5호
• /
• pp.497-503
• /
• 1991

Packed bed column과 continuous stirred tank reactor에서 고정화된 glucoamylase의 catalytic activity를 비교하였다. Settling chamber를 이용한 연속애화, 당화 공정을 사용하여 액화된 전분으로부터 포도당을 연속적으로 생산하였다. . Chitin에 고정화된 glucoamylase에 의한 당화실험에 있어서는 dextrin의 농도가 100g/l일 때, 체류시간 20분 동안 20의 당화수율을 나타냈다.

• 생명과학회지
• /
• 제11권3호
• /
• pp.273-278
• /
• 2001

Removal of nitrogen compound from waste water is essential and often accomplished by biological process. Deni-trification bacterium. Paracoccus denitrificans(KCTC 2350) is employed to estimate the ability and the characteristics of denitrification. In the immobilized biological reactor system, the measurement of absolute amount of active strain in the reactor is comparatively difficult or impossible. In this study, strain immobilized denitrification reactor was designed with the unwoven texture wrapped peeped hole plastic tube to calculated the absolute amount of active strain by comparing the activity of the immobilized reactor adn the free cell reactor. The reactor system was continuous stirred tank reactor and the rate of substrate consumption was assumed to be Michaelis-Menten equation. As a result, we found that the amount of immobilized active strain was the half of the total active strain in the reactor and the time required to reach in the equilibrium state in the immobilized reactor system was shorter than that of the free cell reactor system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1806-1813
• /
• 2003

The stirred tank reactor is one of the most commonly used devices in industry for achieving mixing and reaction. Here we report on results obtained from the large eddy simulations of flow inside the tank performed using a spectral multi-domain technique. The computations were driven by specifying the impeller-induced flow at the blade tip radius. Stereoscopic PIV measurements (Hill et $al.^{(1)}$) along with the theoretical model of the impeller-induced flow (Yoon et $al.^{(2)}$) were used in defining the impeller-induced flow as superposition of circumferential, jet and tip vortex pair components. Large eddy simulation of flow in a stirred tank was carried out for the three different Reynolds numbers of 4000, 16000 and 64000. The effect of different Reynolds numbers is well observed in both instantaneous and time averaged flow fields. The instantaneous and mean vortex structures are identified by plotting an isosurfaces of swirling strength for all Reynolds numbers. The Reynolds number dependency of the nondimeansional eddy viscosity, resolve scale and subgrid scale dissipations is clearly shown in this study.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1290-1298
• /
• 2003

The stirred tank reactor is one of the most commonly used devices in industry for achieving mixing and reaction. Here we report on results obtained from the large eddy simulations of flow inside the tank performed using a spectral multi-domain technique. The computations were driven by specifying the impeller-induced flow at the blade tip radius. Stereoscopic PlY measurements (Hill et al. $^{(1)}$) along with the theoretical model of the impeller-induced flow (Yoon et al. $^{(2)}$) were used in defining the impeller-induced flow as superposition of circumferential, jet and tip vortex pair components. Large eddy simulation of flow in a stirred tank was carried out for the three different Reynolds numbers of 4000, 16000 and 64000. The effect of different Reynolds numbers is well observed in both instantaneous and time averaged flow fields. The instantaneous and mean vortex structures are identified by plotting an isosurfaces of swirling strength for all Reynolds numbers. The Reynolds number dependency of the non-dimensional eddy viscosity, resolved scale and subgrid scale dissipations is clearly shown in this study.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.788-791
• /
• 1996

A mathematical model is developed for thermal solution copolymerization of styrene and acrylonitrile in a continuous stirred tank reactor(CSTR). Computational studies are carried out with the continuous copolymerization system model developed in this work to give the monomer conversion, copolymer composition and the average molecular weights of the copolymer. By performing the dynamic analysis of the reaction system, the polymer properties against the changes in the operating conditions are determined quantitatively. The cascade PID and fuzzy controller show satisfactory performances for both set point tracking and disturbance rejection. Especially, the fuzzy controller is superior to the PID controller.

• 비파괴검사학회지
• /
• 제26권1호
• /
• pp.1-6
• /
• 2006

폐수처리시설의 응집조를 대상으로 0.392MeV의 감마선을 방출하는 In-113m을 추적자로 이용하여 체류시간분포(RTD; residence time distribution)를 측정하였다. 계측 결과는 CFSTR (constant flow stirred tank reactor) 모델을 바탕으로 구축한 K-RTD 프로그램을 이용하여 수학적으로 분석하였으며, 이를 바탕으로 혼합 특성을 규명하고자 하였다 모델에 의한 시뮬레이션 결과를 계측결과와 맞추는 과정에서 유체 거동의 특성을 표현하는 인자들을 계산하였으며, 이들 인자에 의한 시뮬레이션 결과는 실험결과에 매우 성공적으로 부합하였다. 또한 향후 본 실험에서 관찰된 bypass flow의 성분을 이론적 모델에 포함시키고 이를 분석하며 혼합조의 효율에 영향을 미치는 요소들에 대한 추가 연구의 필요성을 확인하였다.