• 한국안전학회지
• /
• 제26권5호
• /
• pp.1-6
• /
• 2011

Flame extinction and the chemistry of stoichiometric methane/air mixture were investigated numerically in the PSR(perfectly stirred reactor). For the study, PSR code was modified to be possible to unsteady calculation, and the sinusoidal fluctuation was subjected to the residence time. In the region of residence time far from the extinction limit, combustion mode was strongly dependent on the frequency. The low frequency excitation provided the quasi-steady behavior on the temperature and the concentrations of related species, but small variation of temperature was observed under high frequency. In the region of residence time near the extinction limit, the mixture subjected above 1 KHz was still reacting even though extinction had to be occurred under quasi-steady concept. The attenuation of extinction limit resulted from that chemical time was comparable to the flow time. The mean mole fractions of both NO and CO were almost same regardless of imposed frequency. However, the average mole fraction of $C_2H_2$ was decreased as increasing frequency, which implies that soot yield might be reduced at the higher frequency of flow excitation. The result provides the basic concept for flame stabilization, and it will be used to design a mild combustor.

• Korean Chemical Engineering Research
• /
• 제54권5호
• /
• pp.612-620
• /
• 2016

산화 칼슘 수용액을 통해 이산화탄소를 포집하는 수성 광물 탄산화 공정은 안정적으로 이산화탄소를 고립시킬 뿐 아니라 생성물의 부가 가치를 기대할 수 있는 대표적인 CCU (Carbon Capture & Utilization) 기술이다. 이 공정의 핵심은 고체 반응물인 산화칼슘의 용해 속도를 최대로 높이는 것인데, 이를 위해 반응기 전체에 고체 반응물이 균일하게 분포되도록 혼합하는 적절한 반응기의 설계가 필요하다. 본 논문에서는 하루에 40ton의 이산화탄소 포집이 가능한 파일럿 규모의 광물 탄산화 반응기를 대상으로, 반응기의 내부 구조 설계에 따라 고체 반응물의 분산도가 어떻게 변하는지에 대해 전산 유체 역학적 모델링(Computational Fluid Dynamics (CFD) modeling)을 통해 연구하였다. 교반 탱크 반응기(stirred tank reactor) 형태를 기반으로 외부 구조는 고정한 상태에서 교반기의 종류/갯수/지름/유격/회전 속도, 칸막이의 높이/너비를 변수로 선정하여 다양한 조합의 경우(case)들을 해석하였다. 각 설계 변수에 대한 민감도를 분석함으로써 각 변수의 영향을 파악하고, 중요한 변수를 판별할 수 있었다. 동시에 고체 부피 분율(solid volume fraction)의 높이 방향 표준 편차가 0.001에 가까운 균일한 분포를 만들 수 있는 내부 설계안을 제안하였다.

• 대한수학회지
• /
• 제49권3호
• /
• pp.641-658
• /
• 2012

The goal of this paper is to develop a nonlinear observer-based control strategy for a multi-variables continuous stirred tank reactor (CSTR). A new robust nonlinear observer is constructed to estimate the whole process state variables. The observer is coupled with a nonlinear controller, designed based on the input-output linearization for controlling the concentration and reactor temperature. The closed loop system is shown to be globally asymptotically stable based on Lyapunov arguments. Finally, computer simulations are developed for showing the performance of the proposed controller.

• 대한화학회지
• /
• 제6권2호
• /
• pp.130-132
• /
• 1962

A new method of evaluating the mixing time in the continuous flow stirred tank is herein proposed. Experimental results to test the concept are also presented.The mixing time is defined as the time interval between the injection of a slug of an electrolyte solution into the tank and the moment at which an essentially straight line begins on a plot of the conductivity of effluent versus time.The proposed method of measuring the mixing time is valid even for the low mixing time (5 seconds) and the results obtained agree well with previous work, where the mixing time measurements were carried out by the injection of a dye into the feed stream.

• 한국미생물·생명공학회지
• /
• 제22권3호
• /
• pp.304-308
• /
• 1994

A suitable culture method and bioreactor type for itaconic acid production were chosen by comparing the maximal concentration of itaconic acid produced in various systems. In batch culture, the maximal concentration of itaconic acid produced in a bubble column reactor was about 5% greater than that produced in stirred-tank or external-loop airlift reactor. These results were thought to be due to lower shear force and higher mass transfer efficiency in a bubble column reactor in comparison with other reactors. Moreover, the fed-batch mode in a bubble column was found to be a suitable one, producing about 25% higher concentration of itaconic acid compared to batch mode.

• 한국가스학회지
• /
• 제5권4호
• /
• pp.70-78
• /
• 2001

설비가 공정에 어느 정도 중요도를 가지고 있는지 분석하기 위해 연속교반탱크 반응기를 대상으로 민감도 분석을 수행하였다. 그리고 민감도 분석결과가 가지는 불확실성을 평가하기 위해 불확실성 분석을 수행하였다 또한 비용효과 분석을 통하여 장치가 가지는 신뢰도 데이터 대 가격을 고려하여 보다 좋은 신뢰도를 가지는 장치를 사용함으로써 경제적 효율을 높일 수 있음을 보여주었다. 불확실성 분석의 수행결과로 연속교반탱크 반응기의 파열사고는 $8.09{\times}10^{-04}/year{\~}5.50{\times}10^{-02}/year$의 범위에서 가능성을 가지친 있다. 비용효과 분석은 VLU(Voting Logic Unit) 장치를 교체함으로써 가장 큰 위험성 감소효과를 제시하였다.

• 비파괴검사학회지
• /
• 제26권1호
• /
• pp.1-6
• /
• 2006

폐수처리시설의 응집조를 대상으로 0.392MeV의 감마선을 방출하는 In-113m을 추적자로 이용하여 체류시간분포(RTD; residence time distribution)를 측정하였다. 계측 결과는 CFSTR (constant flow stirred tank reactor) 모델을 바탕으로 구축한 K-RTD 프로그램을 이용하여 수학적으로 분석하였으며, 이를 바탕으로 혼합 특성을 규명하고자 하였다 모델에 의한 시뮬레이션 결과를 계측결과와 맞추는 과정에서 유체 거동의 특성을 표현하는 인자들을 계산하였으며, 이들 인자에 의한 시뮬레이션 결과는 실험결과에 매우 성공적으로 부합하였다. 또한 향후 본 실험에서 관찰된 bypass flow의 성분을 이론적 모델에 포함시키고 이를 분석하며 혼합조의 효율에 영향을 미치는 요소들에 대한 추가 연구의 필요성을 확인하였다.

• KSBB Journal
• /
• 제20권2호
• /
• pp.100-105
• /
• 2005

탈질화 균주인 Paracoccus denitrificans를 이용한 탈질화 공정에 있어서 탈질 효율의 증대를 위해 선행 연구를 바탕으로 화학적 permeabilization 처리 후 균주를 고정화시키는 방법을 이용하였다. 반응기는 이상적인 CSTR을 도입하여 free cell reactor와 immobilized cell reactor 그리고 permeabilized and immobilized cell reactor의 세 가지 형태의 실험을 실시하였으며, 탈질효율의 비교를 위해 M-M 식을 적용시켰다. 각 반응기의 체류시간에 따른 탈질 효과는 permeabilized and immobilized cell reactor가 가장 우수하였으며 또한 반응 평형에도 다른 두 반응기에 비해 빨리 도달하는 것으로 나타났다.

• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.387-393
• /
• 2014

The purpose of this study is to evaluate integrated anaerobic hydrogen fermentation and membrane bioreactor (MBR) for on-site domestic wastewater treatment and resource recovery. A synthetic wastewater (COD 17,000 mg/L) was used as artificial brown water which will be discharged from urine diversion toilet and fed into a continuous stirred tank reactor (CSTR) type anaerobic reactor with inclined plate. The effluent of anaerobic reactor mixed with real household grey water (COD 700 mg/L) was further treated by MBR for reuse. An optimum condition maintained in anaerobic reactor was HRT of 8 hrs, pH 5.5, SRT of 5 days and temperature of $37^{\circ}C$. COD removal of 98% was achieved from the overall system. Total gas production rate and hydrogen content was 4.6 L/day and 52.4% respectively. COD mass balance described the COD distribution in the system via reactor byproducts and effluent COD concentration. The results of this study asserts that, anaerobic hydrogen fermentation combined with MBR is a potent system in stabilizing waste strength and clean hydrogen recovery which could be implemented for onsite domestic wastewater treatment and reuse.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권5호
• /
• pp.49-55
• /
• 2012

A 1.28 L-batch reactor and continuous-flow stirred tank reactor (CFSTR) fed with formate and trichloroethene (TCE) were operated for 120 days and 56 days, respectively, to study the effect of formate as electron donor on anaerobic reductive dechlorination (ARD) of TCE to cis-1,2-dichloroethylene (c-DCE), vinyl chloride (VC), and ethylene (ETH). In batch reactor, injected 60 ${\mu}mol$ TCE was completely degraded in the presence of 20% hydrogen gas ($H_2$) in less than 8 days by anaerobic dechlorination mixed-culture (300 mg-soluble protein), Evanite Culture with ability to completely degrade tetrachloroethene (PCE) and -TCE to ETH under anaerobic conditions. Once the formate was used as electron donor instead of hydrogen gas in batch or chemostat system, the TCE-dechlorination rate decreased and acetate production rate increased. It indicates that the concentration of hydrogen produced in both systems is possibly more close to threshold for homoacetogenesis process. Soluble protein concentration of Evanite culture during the batch test increased from 300 mg to 688 mg for 120 days. Through the protein monitoring, we confirmed an increase of microbial population during the reactor operation. In CFSTR test, TCE was fed continuously at 9.9 ppm (75.38 ${\mu}mol/L$) and the influent formate feed concentration increased stepwise from 1.3 mmol/L to 14.3 mmol/L. Injected TCE was accumulated at 18 days of HRT, but TCE was completely degraded at 36 days of HRT without accumulation of the injected-TCE during the left of experiment period, getting $H_2$ from fermentative hydrogen production of injected formate. Although c-DCE was also accumulated for 23 days after beginning of CFSTR operation, it reached steady-state in the presence of excessive formate. We also evaluated microbial dynamic of the culture at different chemical state in the reactor by DGGE (denaturing gradient gel electrophoresis).