• Steel and Composite Structures
• /
• v.6 no.1
• /
• pp.33-53
• /
• 2006

The rotational behaviour of bolted extended end plate beam-to-column connections is evaluated in the context of the component method. The full moment-rotation response is characterized from the force-deformation curve of the individual joint components. The deformability of end plate connections is mostly governed by the bending of the column flange and/or end plate and tension elongation of the bolts. These components form the tension zone of the joint that can be modelled by means of "equivalent T-stubs". A systematic analytical procedure for characterization of the monotonic force-deformation behaviour of individual T-stub connections is proposed. In the framework of the component method, the T-stub is then inserted in the joint spring model to generate the moment-rotation response of the joint. The procedures are validated with the results from an experimental investigation of eight statically loaded extended end plate bolted moment connections carried out at the Delft University of Technology. Because ductility is such an important property in terms of joint performance, particularly in the partial strength joint scenario, special attention is given to this issue.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.36-43
• /
• 2005

Stiffness reduction factor of slab in flat-plate structure is proposed in comparison with UCB test result. Then analysis of structural system of flat-plate apartment buildings is carried out by using effective beam width method and finite element method. Effective beam width method overestimates the lateral stiffness of the system where columns are arranged atypically and overestimates the stiffness of slab-wall joint.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.251-260
• /
• 1999

The stiffness of joint parts in the finite element beam model are corrected by the direct comparison between the modal test and analysis model. The corrected stiffness are reviewed according to the boundary conditions of modal testing. For the improved modal test/analysis correction, more modes measured than acceleration sensors are used to make a minimal order system model. In addition, the initial F.E. model is reduced to the degrees of freedom of a minimal order system model, keeping the dynamics of the initial model. Finally, for the parametric correction of the reduced model, the submatrices are used to model the initially assumed stiffness.

• Structural Engineering and Mechanics
• /
• v.66 no.1
• /
• pp.1-14
• /
• 2018

Column is usually floating on the stone base directly with or without positioning tenon in traditional Chinese timber structure. Vertical load originated by the heavy upper structure would induce large friction force and compression force between interfaces of column foot and stone base. This study focused on the mechanical behaviors of column foot joint with consideration of the influence of vertical load. Mechanism of column rocking and stress state of column foot has been explored by theoretical analysis. A nonlinear finite element model of column foot joint has been built and verified using the full-scale test. The verified model is then used to investigate the mechanical behaviors of the joint subjected to cyclic loading with different static vertical loads. Column rocking mechanism and stress distributions of column foot were studied in detail, showing good agreement with the theoretical analysis. Mechanical behaviors of column foot joint and the effects of the vertical load on the seismic behavior of column foot were studied. Result showed that compression stress, restoring moment and stiffness increased with the increase of vertical load. An appropriate vertical load originated by the heavy upper structure would produce certain restoring moment and reset the rocking columns, ensuring the stability of the whole frame.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.357-373
• /
• 2022

The high-temperature gas-cooled reactor pebble-bed module project is the first commercial Generation-IV NPP(Nuclear Power Plant) in China. A new joint is used for the vertical support of RPV(Reactor Pressure Vessel). The steel corbel is integrally embedded into the reactor-cabin wall through eight asymmetrically arranged pre-stressed high-strength bolts, achieving the different path transmission of shear force and moment. The vertical monotonic loading test of two specimens is conducted. The results show that the failure mode of the joint is bolt fracture. There is no prominent yield stage in the whole loading process. The stress of bolts is linearly distributed along the height of corbel at initial loading. As the load increases, the height of neutral axis of bolts gradually decreases. The upper and lower edges of the wall opening contact the corbel plate to restrict the rotation of the corbel. During the loading, the pre-stress of some bolts decreases. The increase of the pre-stress strength ratio of bolts has no noticeable effect on the structure stiffness, but it reduces the ultimate bearing capacity of the joint. A simplified calculation model for the elastic stage of the joint is established, and the estimation results are in good agreement with the experimental results.

• Structural Engineering and Mechanics
• /
• v.88 no.5
• /
• pp.501-519
• /
• 2023

This paper introduces a new hybrid structural connection joint that combines shear walls with section steel beams, fundamentally resolving the construction complexity issue of requiring pre-embedded connectors in the connection between shear walls and steel beams. Initially, a quasi-static loading scheme with load-deformation dual control was employed to conduct low-cycle repeated loading experiments on five new connection joints. Data was acquired using displacement and strain gauges to compare the energy dissipation coefficients of each specimen. The destruction process of the new connection joints was meticulously observed and recorded, delineating it into three stages. Hysteresis curves and skeleton curves of the joint specimens were plotted based on experimental results, summarizing the energy dissipation performance of the joints. It's noteworthy that the addition of shear walls led to an approximate 17% increase in the energy dissipation coefficient. The energy dissipation coefficients of dog-bone-shaped connection joints with shear walls and cover plates reached 2.043 and 2.059, respectively, exhibiting the most comprehensive hysteresis curves. Additionally, the impact of laminated steel plates covering composite concrete floors on the stiffness of semi-rigid joint ends under excessive stretching should not be disregarded. A comparison with finite element analysis results yielded an error of merely 2.2%, offering substantial evidence for the wide-ranging application prospects of this innovative joint in seismic performance.

• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.99-105
• /
• 1993

In this paper a useful method on evaluating the joint stiffness of a bolted member was introduced using optimization technique on the basis of Finite Element Method. A finite element model having one directional gap element at boundary area was introduced to compensate the prying force in jointed members which might be caused by geometrical configuration of members. Results showed a good agreement with classical method in certain range and will be available to define the appropriate design margin of pre-load design.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.363-382
• /
• 2015

This paper presents a numerical study on the effect of segment assembly characteristics on the TBM segmental lining member section forces. Analyses have been carried out through the two-ring beam finite element model by Midas civil 2012+. TBM segment lining member forces are determined by various joint characteristics. In this study, the segmental member forces were investigated with various joint number and orientation at fixed values of joint stiffness, ground spring parameters. The numerical results were used to identify trends of the member forces in the tunnel lining with the segment assembly characteristics.

• Clinics in Shoulder and Elbow
• /
• v.12 no.2
• /
• pp.264-270
• /
• 2009

Purpose: The elbow joint is one of the most stable joints. Dislocation and fracture can occur in elbow joint most commonly next to shoulder joint. Various injuries can occur according to generated mechanism, age of patient and impact. Despite proper treatment, various complications can occur. Materials and Methods: We describe etiology and treatment of these complications after elbow trauma such as stiffness, instability and heterotopic ossification. Results and Conclusion: Malunion, nonunion and traumatic arthritis are addressed as a possible complication after fracture around elbow joint.

• The Journal of Korean Society for Neurotherapy
• /
• v.22 no.3
• /
• pp.43-48
• /
• 2018

Purpose The purpose of this study is to identify the prevalence, risk factors, characteristics, and interventions of hip joint problems in children with cerebral palsy, and to be able to serve as leverage for early detection, prevention, and function recovery. Method The electronic journal site was searched by the search terms "cerebral palsy", "hip joint", "hip joint dislocation", we analyzed and descript the cited articles from domestic and foreign papers in Pubmed 9, Science Direct 7, and K RISS analysis and analysis. Results Children with cerebral palsy showed the different prevalence according to their disability type, severity, and functional level, and we knew that abnormal neuromuscular control, stiffness, and biomechanical changes could be risk factors. Migration Index, Acetabolum Index, Neck shaft angle using by radiography and passive ROM test, special tests were available for the diagnosis and evaluation of the hip joint. Combination of physical therapy and orthopedic surgery was very important intervention, and complementary alternative therapy, orthosis, and postural assistant are effective. Conclusion We suggested that early detection and prevention is the most important periodic examination and that a multidisciplinary approach is a major factor in intervention.