• 한국의류학회지
• /
• 제29권7호
• /
• pp.997-1007
• /
• 2005

The textile finishing methods utilizing chitosan have been mostly focused on the applications in the improvement of the dyeing of cotton fabrics, or the improvement of hand of the cotton or wool fabrics. On the other hand, it Is difficult to find the application examples in the synthetic fiber fabrics including polyester and nylon fabrics. The aim of this study is to improve the stiffness and the poor wash fastness of the fabrics treated only with chitosan. We tried to improve the softness by employing chitosan and polyurethane mixture solution and to prevent the detachment of the chitosan from the fabric. The treatment was applied to cotton, polyester, and nylon fabrics. The change of the properties of the treated fabrics were investigated. The optimum finishing condition was sought by changing the mixture ratio of the chitosan/PU(polyurethane) solutions. The adjusted ratios of the chitosan/PU solutions were 1 : 0, 1 : 0.25, 1 : 0.5, and 1 : 2 during the mixture solution preparation. Using the KES(Kawabata Evaluation System), the physical and mechanical properties of the finished fabric specimens were analyzed, and hand values of the specimens were calculated through the use of translational formulas. According to the chemical composition of the fibers, chitosan solution or chitosan/PU mixture exhibited wide range of coating effect. Since the chitosan acid solution has high polarity, the bonding force with the cotton fibers is high. By the appropriate addition of PU in the chitosan treatment of cotton, KOSHI and HARI values of the fabric improved. The air permeability of the chitosan/PU treated cotton fabric specimen improved, resulting in the highest value at the mixture of chitosan : PU=1:0.25.

• 한국의류학회지
• /
• 제18권4호
• /
• pp.515-523
• /
• 1994

This study was accomplished to investigate the mechanical properties and handle according to treatment processes and brushing condition. For this study, grey fabrics of blended ratio of polyester 65% : cotton 35% were bleached and dyed. These fabrics were then brushed 1, 3, 5 and 7 times. The mechanical properties were measured with a KES-F system and the mechanical data were then transformed into hand values by the conversion equation, that is, KN-201-MDY. The results obtained by the analysis are as follows; 1) The variation of mechanical properties was remarkable in the initial brushing of 1∼ 3 cycles for all of grey, bleached and dyed fabrics. The values of RT, 2HB, B, G, 2HGS, MMD and SMD were decreased and MIU, WC and T were increased with the increase of number of brushing . 2) LT, B, 2HB, G, 2HG, 2HGS, MMD, SMH and W of dyed fabrics which is coincident with the end use showed lower values than those of grey or bleached fabrics, but MIU, WC and T were higher 3) From the variation of hand value, stiffness of dyed fabric showed lower value than that of grey or bleached fabric. On the other hand, smoothness, soft feeling and total hand values of dyed fabric were higher. Especially, dyed fabric showed the highest total value at the 3 cycles of brushing condition.

• 한국의류산업학회지
• /
• 제16권5호
• /
• pp.791-799
• /
• 2014

For development of dyeability, the rayon fabrics were dyed repeatedly with persimmon juice by padding mangle. The merit of padding-based dyeing was easier color reproduction over traditional hand dyeing where various colors and color fastness to light and laundering are hard to obtain. We evaluated the mechanical properties and hand value by Kawabata Evaluation system for dyed rayon fabrics. The results obtained from this study were as follows. With the increase of repeating padding times of dyeing, the linearity load-extension curve and tensile energy per unit length of the rayon fabrics were increased, but the tensile resilience of fabrics were decreased. The value of shear stiffness and shear hysteresis were increased. Also compression resilience and linearity of compression thickness were increased. The rayon fabrics dyed with persimmon juice had shown the thickness and weight increase as the number of padding increase. As repeating times of dyeing with persimmon juice were increased, among the 6 hand values, the item of koshi(stiffness) and Hari(anti-drape stiffness), fukurami(fullness and softness) were increased. while Shinayakasa (flexibility with soft feeling) and Shari(crispness) were greately decreased. The amount of coated persimmon juice on the surface of the fabric was gradually increased as the padding times of dyeing.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.350-359
• /
• 2017

This paper presents a new holistic development approach for the carbon continuous-fiber composite frame of an automotive sunroof assembly. The original steel frame has been designed to get higher bending stiffness with its corrugated cross-sectional shape. The new approach uses the prepregs of a fast cure epoxy and PCM manufacturing processing. For higher productivity, the new frames feature a very simple plat cross sectional shape but achieve high bending stiffness through the laminate design. The sandwich structure with a PET foam core was presented. The frames were made of carbon UD laminae covered single carbon fabric on the outer surfaces. The fabrics provide torsional stiffness and also hold the carbon UD fibers floating in the low viscous epoxy resin of prepregs at the curing temperature during processing. The final product yields approximately 18 % savings in weight compared with the original.

• 한국의류학회지
• /
• 제30권5호
• /
• pp.772-778
• /
• 2006

Silk organza can make the silhouette of clothes bulky and rich, owing to its stiffness. And silk organza in the gum has better dyeability so can be dyed more bright and deeper color than scoured silk because silk organza has sericin gum that has better dyeability than fibroin. So, silk organza came into the most broad use as the material for Hanbok, especially in summer. But the silk organza has poor color fastness. Sericin is removed from organza when silk organza go through scouring. The purpose of this research is to find out the optimum conditions that the scoured silk fabrics can get stiffness by persimmon juice treatment. For experiments, non scoured, partially scoured and fully scoured silk fabrics were prepared by alkali treatments. Then 3 kinds of silk fabrics were treated with the concentration of 1, 5, 10, 50 and 100% of persimmon Juice. The change of fiber surface of the various silk fabrics were observed By SEM. The hand values of those fabric samples also were measured hand values by Kawabata Evaluation System and stiffness by Cantilaver method. By scouring, the silk organza got more flexibility and less cohesiveness between their fibers. And it can be a little more bulky by removing gum. Namely, silk organza lost its unique stiff and crisp handle. By the persimmon juice treatment, tannin component could be coated on the fiber surface. so that the stiffness of the fabrics were improved.

• 한국염색가공학회지
• /
• 제10권4호
• /
• pp.37-44
• /
• 1998

The purpose of this study was to elucidate the effect of weight loss of polyethylene terephthalate(PET) fabrics on the mechanical properties such as bending and shear. In order to compare the effect of treatment machine on the mechanical properies of treated PET fabrics, PET fabrics were hydrolyzed with NaOH aqueous solution using Tank machine and Liquor flow machine, respectively. The results were as follows ： 1. The bending rigidity and shear stiffness of hydrolyzed PET fabric decreased markedly up to about 10％ weight loss regardless of treatment machines. At the above 10％ weight loss, the variation of these properties is nearly unchanged. In addition, the bending hysteresis and shear hysteresis also showed similar trend. 2. Weft density change of PET fabrics treated with Liquor flow machine decreased by 1pick/inch. It is assumed that this is attributed to the tension during the treatment of Liquor flow machine. On the other hand, the weft density change of PET fabrics treated with Tank machine is scarcely influeneced by the weight loss. While warp density of PET fabrics treated with Liquor flow machine had no change with weight loss, warp density of PET fabrics treated with Tank machine decreased by 6pick/inch due to the tension. 3. The bending rigidity and shear stiffness of PET fabrics hydrolyzed with liquor flow machine slightly higher than with Tank m/c at the above 10％ weight loss. It is assumed that this is caused by the increasement of the crossing pressure of warp and weft yarn and contact points of filaments in the yarns. Also, the bending and shear hysteresis of PET fabrics treated with Tank machine were higher than that of liquor flow machine.

• 한국의류학회지
• /
• 제31권9_10
• /
• pp.1453-1464
• /
• 2007

The purpose of this study is to examine the hand of spring/fall fabrics for 'Saenghwal Hanbok' on subjective hand, objective hand and the preference. In this study, 28 varieties of spring/fall fabrics such as cotton fabrics, synthetic fabrics, blended fabrics and a silk fabric for 'Saenghwal Hanbok' are used. To evaluate the subjective hand of fabrics, the holistic touch and preferences, 33 seven ranks' segmentic differential scale questions are developed with adjective pairs and are gathered by surveying experts on clothes. The mechanical properties, HV and THV of them are measured and calculated by KES-FB system. Through subjective hand, items could be classified into six hand expressions: 'bulky/extensibility', 'stiffness', 'feeling of weight', 'surface property', 'drapability' and 'moisture property'. Through mechanical properties, the results indicated that the character of cotton fabrics are slight flexible, tough, rough, uneven, a bit heavy, thick and low resilience on tensile and compression, and then those of synthetic fabrics, blended fabrics and a silk fabric are thin and light, smooth, flat and bulkless. In correlation on subjective evaluations and the preference for 'Saenghwal Hanbok', cotton fabrics mainly depend on 'surface property' and 'moisture property' and then synthetic fabrics, blended fabrics and a silk depend on 'bulky/extensibility' and 'surface property' In correlation on objective hand and the preference for 'Saenghwal Hanbok'. people aren't satisfied with low resilience. high stiffness and low drape.

• 감성과학
• /
• 제24권4호
• /
• pp.149-156
• /
• 2021

본 연구에서는 1500℃ 이상의 극한 열 환경에서 사용되는 소재인 SiC (silicon carbide) 섬유를 복합방적사로 제조한 후에 원단을 제직하고 제직된 원단의 역학적 특성을 KES-FB system으로 측정하고 측정된 역학적 특성 값으로부터 착용성능을 분석하여 방화복으로의 활용 가능성을 알아보았다. 그 결과 직물의 역학적 특성에서는 인장선형성(LT)과 인장레질리언스(RT), 전단강성(G)을 나타내는 값이 원사의 제조형태에 따라서 그 특성 값의 차이를 보였으며, 직물의 두께와 평량, 밀도 값이 전단히스테리시스(2HG)와 압축레질리언스(RC) 값에 영향을 준다는 것을 알 수 있었다. 의복착용 성능에서는 착용 시 부피감을 나타내는 두께에 대한 압축에너지의 비(WC/T) 값에서 SiC 복합방적사로 제조된 직물의 값이 가장 우수한 값을 타나내었으며, 방염성능에서는 SiC 복합방적사로 제조된 직물이 탄화길이와 잔염시간에서 KFI 성능기준을 만족하여 방화복으로서의 활용이 가능함을 확인할 수 있었다.

• 한국의류학회지
• /
• 제15권3호
• /
• pp.271-280
• /
• 1991

Emulsion graft copolymerization of MMA onto cotton fiber using Ce(IV) salt as an initiator was carried out. Graft yield and graft efficiency were observed according to the kinds and concentrations of emulsifier and polymerization conditions. The physical properties of MMA grafted cotton fabric were investigated. The results of this study were as follows: 1. The heighest graft yield of emulsion graft polymerization occurred at the concentration below cmc of emulsifier, which was different from emulsion polymerization. Nonionic sur- factant as an emulsifier was more effective than anionic one. 2. The highest graft yield was obtained at the initiator concentration $1{\times}10^{-2}mol/l$. The viscometric molecular weight of PMMA was in the order of 106. 3. As reaction time increased, the graft yield increased but the graft efficiency decreased. 4. Elevation of reaction temperature resulted in increase of graft yield. The apparent activation energy of MMA graft polymerization was 4.72 Kcal/mol. 5. Physical properties of MMA grafted cotton fabric varied with increase of grafting. Thickness and stiffness showed a noticeable increase, whereas tensile strength and elongation was slightly increased. Crease recovery increased as the graft yield increase up to $50\%$ and decreased thereafter.

• 한국의류산업학회지
• /
• 제5권4호
• /
• pp.408-412
• /
• 2003

The micro structure of POY was modified and a wool-like touch yarn of composite fibers with different shrinkage was made. With this yarn 12 different fabrics with wool like touch were prepared. The characteristic physical property changes of the fabrics examined are as follows: 1. In all cases, the initial high shrinkage stages were observed in hot water treatment and the 3D images of complex multilayer of typical doubling fibers with different shrinkage were also observed in hot air treatment of 170C. 2. The tensile strength changes of satin and plain fabrics with the change of twist count showed similar behavior. However, WT's were slightly higher and RT's was lower in twill and satin fabrics than those in plain fabric. 3. Since a slight decrease of B's of twill fabric found with increasing twist count under given experimental condition, it could be influenced on the anti-drape stiffness was decreased and flexibility was increased. 4. A significant decrease of G values was observed in the twist count 800-1000 T.P.M However, in the twist count higher than 1000 T.P.M G values observed were kept nearly constant. 5. MIU of plain and twill fabrics showed a drastic decrease at the twist count higher than 1000 T.P.M.