Fashion & Textile Research Journal (한국의류산업학회지)

The Society of Fashion and Textile Industry (한국의류산업학회)
권호 표지

The Mechanical Propertis of Wool-like Fabrics Using Composite Textured Yarn

복합가공사를 이용한 Wool-like 직물의 역학적성질

  • Received : 2003.04.04
  • Published : 2003.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

The micro structure of POY was modified and a wool-like touch yarn of composite fibers with different shrinkage was made. With this yarn 12 different fabrics with wool like touch were prepared. The characteristic physical property changes of the fabrics examined are as follows: 1. In all cases, the initial high shrinkage stages were observed in hot water treatment and the 3D images of complex multilayer of typical doubling fibers with different shrinkage were also observed in hot air treatment of 170C. 2. The tensile strength changes of satin and plain fabrics with the change of twist count showed similar behavior. However, WT's were slightly higher and RT's was lower in twill and satin fabrics than those in plain fabric. 3. Since a slight decrease of B's of twill fabric found with increasing twist count under given experimental condition, it could be influenced on the anti-drape stiffness was decreased and flexibility was increased. 4. A significant decrease of G values was observed in the twist count 800-1000 T.P.M However, in the twist count higher than 1000 T.P.M G values observed were kept nearly constant. 5. MIU of plain and twill fabrics showed a drastic decrease at the twist count higher than 1000 T.P.M.

Keywords

References

  1. 박명수·윤종호 (2000) 연신비와 열고정 온도에 따른 Partiary Oriented Yarn(P0Y)의 구조 변화와 물성. 한국염색가공학회지, 12, 103-110
  2. 박명수·최영미 (1999) 신합섬 직물의 역학적특성과 태에 관한 연구 (I). 한국염색가공학회지, 11, 73-82
  3. 서문호 (1994) 직물구조가 신합 섬직물의 역학적특성에 미치는 영향 (I). 한국섬유공학회지, 31, 1038-1050
  4. 오경애 · 김승진 (1993) 폴리에스테르 직물의 역학특성에 관한 연구. 한국섬유공학회지, 30, 719-730
  5. 오경애 · 김승진 · 조대현 · 김석근 · 김태훈 · 서문호 (1993) 폴리에스테르 직물의 공정수축특성과 직물 역학특성과의 상관성 연구. 한국섬유공학회지, 30, 803-816
  6. Selivansky D and Lewin M. (1982) Strain phenomena of poy revealed by thermal retraction and other techniques. J. Appl. Polym. Sci., 27, 2337-2349 https://doi.org/10.1002/app.1982.070270703
  7. Warwicker J.O and Vevers B. (1978) The dimensional change of partiary oriented polyester yarns subjected to dry and wet heat. J. Appl. Polym. Sci., 25, 977-995 https://doi.org/10.1002/app.1980.070250601
  8. Ajayi J.O and Elder H.M (1997) Fabric fraction, hander, and compress. J.Text. Inst., 1(3), 232-241
  9. Randhakrishnaiah P and Tejatanalert S. (1993) Handle and comport properties of wool fabrics made random bland and cotton-covered cotton/polyester yarns. Text. Rec. J., 63, 573-579 https://doi.org/10.1177/004051759306301003
  10. Dhingra R.C., Jong S. and Postle R. (1981) The low-sterss mechanical poperties of wool and wool-blend woven fabrics. Text. Res. J., 51, 759 https://doi.org/10.1177/004051758105101203
  11. Dhingra R.C., Lui D. and Postle R. (1989) Measuring and interpreting low-sterss fabric mechanical and surface properties. Text. Rec. J., 59, 357 https://doi.org/10.1177/004051758905900608
  12. Kawabata S. (1975) The standardization and analysis of hand evaluation(first edition). The Text. Mach. Soc. of Japan, Okasa
  13. Kawabata S., Postle R. and Niwa M. (1992) 'Objective Specification of Fabric Quality: Mechanical Properties and Performance.' The Text. Mach. Soc. of Japan, Kyoto