• Food Science of Animal Resources
• /
• v.39 no.5
• /
• pp.687-703
• /
• 2019

A survey we conducted suggests that the ingestion of veterinary drug residues in edible animal parts constitutes a potential health hazard for its consumers, including, specifically, the possibility of developing multidrug resistance, carcinogenicity, and disruption of intestinal normal microflora. The survey results indicated that antibiotics, parasitic drugs, anticoccidial, or nonsteroidal anti-inflammatory drugs (NSAIDs) are broadly used, and this use in livestock is associated with the appearance of residues in various animal products such as milk, meat, and eggs. We observed that different cooking procedures, heating temperatures, storage times, fermentation, and pH have the potential to decrease drug residues in animal products. Several studies have reported the use of thermal treatments and sterilization to decrease the quantity of antibiotics such as tetracycline, oxytetracycline, macrolides, and sulfonamides, in animal products. Fermentation treatments also decreased levels of penicillin and pesticides such as dimethoate, malathion, Dichlorodiphenyldichloroethylene, and lindane. pH, known to influence decreases in cloxacillin and oxacillin levels, reportedly enhanced the dissolution of antimicrobial drug residues. Pressure cooking also reduced aldrin, dieldrin, and endosulfan in animal products. Therefore, this review provides updated information on the control of drug residues in animal products, which is of significance to veterinarians, livestock producers, and consumer health.

• Food Science and Preservation
• /
• v.21 no.4
• /
• pp.544-548
• /
• 2014

This study was conducted to investigate the effects of various heat treatments on the microbial reduction and germination of red radish seeds for the development of effective and economical sterilization methods of improving microbial safety without reducting the germination rate. Hydrothermal treatment was conducted at 60, 65, 70, 75, 80, and $90^{\circ}C$ for 30 and 60 seconds, and dry heat treatment was performed at 70, 80, 90, and $100^{\circ}C$ for 5 minutes. In the seeds that underwent the hydrothermal treatment, time had little effect on the microbial reduction. There was no significant microbial reduction over time. However, there was significant microbial reduction as temperatures increased (p<0.001). The total plate count (TPC) was reduced by more than 3 logs, and Listeria monocytogenes was not detected at temperatures above $70^{\circ}C$. In the seeds that were subjected to the dry heat treatment, the TPC and the population of the L. monocytogenes were significantly reduced as the temperatures increased (p<0.001). After treatment at $100^{\circ}C$ for 5 minutes, the TPC and the L. monocytogenes were reduced by 3 logs. As with the microbial reduction, time had little effect on the germination. There were no significant changes in the germination after the hydrothermal treatment over time; but at the temperatures above $75^{\circ}C$, the germination rate significantly decreased as the temperature increased (p<0.001). When the seeds were soaked after the hydrothermal treatment, their germination was stimulated. The dry heat treatment at temperatures of $80^{\circ}C$ and higher significantly decreased the germination rate as the temperature increased (p<0.001). Dry heat treatment before the germination of the seeds soaked in distilled water for three hours significantly decreased the germination at temperatures greater than $90^{\circ}C$ (p<0.05). This study showed that appropriate heat treatments can increase the microbiological safety and germination of red radish seeds.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.2
• /
• pp.104-113
• /
• 2012

Crab-like flavorants (CFs) were made from snow crab cooker effluent (SCCE) using response surface methodology (RSM) and reaction flavoring technology (RFT). Type A CF was made from SCCE via RSM, RFT, adding starch syrup, centrifugation, and microfiltration. Type B was made from type A by adding the food additives dimethyl sulfide, ethyl valerate and fish sauce. The stability of the CFs was evaluated in terms of the color values, sensory evaluation, and flavor profiles after storage for 90 days at three different temperatures: 10, 20, and $30^{\circ}C$. The compounds, ethanol and 3-methyl-1-butanol, were considered key components of off-flavor and a decrease in dimethyl-2-vinylpyrazine affected the occurrence of off-flavor. It may be a microbial metabolite arising from contamination and lab-scale micro-filtration. At the lowest temperature ($10^{\circ}C$), the decrease in volatile compounds, such as pyrazines, was not as dramatic as at $20^{\circ}C$ and $30^{\circ}C$ and alcohol formation was prevented or delayed. Therefore, it is necessary to store CFs at < $10^{\circ}C$ with suitable sterilization to preserve volatile flavor compounds and prevent off-flavor from occurring.

• Journal of Ginseng Research
• /
• v.4 no.1
• /
• pp.104-120
• /
• 1980

The effects of temperature on transpiration, chlorophyll content, frequency and aperture of stomata, and leaf temperature of Panax ginseng were reviewed. Temperature changes of soil and air under spade roof were also reviewed. Growth responses of responses of ginseng plant at various temperature were assessed in relation to suseptibillity of ginseng plants. Reasonable management of ginseng fields was suggested based on the response of ginseng to various temperatures. Stomata frequency may be increased under high temperature during leaf$.$growing stage. Stomata aperture increased by high temperature but the increase of both frequency and aperture appears not enough for transpiration to overcome high temperature encountered during summer in most fields. Serial high temperature disorder, i.e high leaf temperature, chlorophyll loss, inhibition of photosynthesis, increased respiration and wilting might be alleviated by high humidity and abundant water supply to leaf. High air temperature which limits light transmission rate inside the shade roof, induces high soil temperature(optimum soil temperature 16∼18$^{\circ}C$) and both(especially the latter) are the principal factors to increase alternaria blight, anthracnose, early leaf fall, root rot and high missing rate of plant resulting in poor yield. High temperature disorder was lessen by abundant soil water(optimum 17∼21%) and could be decreased by lowering the content of availability of phosphorus and nitrogen in soil consequently resulting in less activity of microorganisms. Repeated plowing of fields during preparation seems to be effective for sterilization of pathogenic microoganisms by high soil temperature only on surface of soils. Low temperature damage appeared at thowing of soils and emergence stage of ginseng but reports were limited. Most limiting factor of yield appeared as physiological disorder and high pathogen activity due to high temperature during summer(about three months).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.4
• /
• pp.320-326
• /
• 2019

Recently, the application of atmospheric plasma technology in air filtration is increasing. Sterilization by an atmospheric plasma device is very effective. However, ozone gas, which is generated during atmospheric plasma formation, poses a hazard to human health. To reduce the ozone gas during plasma discharge, we fabricated a one-plate hybrid plasma discharge device with a heating element, which can decompose ozone gas effectively by a simple heating action. In this study, we evaluated the plasma discharge characteristics and ozone concentrations with various Ar flow rates and temperatures. With increasing Ar gas flow rate, the ozone concentration and spectrum intensity increased till an Ar gas flow rate of 60 sccm, and decreased thereafter. When discharged in high temperature, the ozone concentration and spectrum intensity decreased. Further, to evaluate the state of the treated surface under various plasma discharge and heating conditions, we measured the variation in the contact angles on the surface. Regardless of the temperature, the contact angle increased with increasing discharge voltage. However, the contact angle increased when discharged at high temperature.

• Journal of Biomedical and Translational Research
• /
• v.19 no.4
• /
• pp.103-109
• /
• 2018

Aspergillus luchuensis 34-1 was inoculated into wheat pellets with different conditions of raw materials to produce nuruk. The degree of substrate reactivity improvement of steam treated raw materials compared with that of non-heat treated was analyzed. The water content of the pellet was adjusted to 25% and 35%, and steam treatment for 10 minutes improved the substrate reactivity at 2.1-fold and 3.1-fold, and sterilization was also possible. The characteristics of improvement pellet nuruk were investigated according to the degree of crushing and water content of raw materials according to the temperatures and humidities ($23^{\circ}C$, $30^{\circ}C$ and RH 60%, RH 80%). The pH of the pellet nuruk was higher depending on the temperature, humidity and moisture content of the koji were lower, and the pH of the flour-pellet nuruk was lower than that of 2 mm milling wheat-pellet nuruk according to milling degree. It can be seen that the milling degree affects the growth of mold. The acidity and amino acid were generally higher as fermentation time increased. Also, the higher the incubation temperature, humidity and moisture content, the higher the value. Glucoamylase activity was significantly the highest in moisture content 35% D2b nuruk, cultured at $30^{\circ}C$ and 80% RH for 38 hours. This is higher than the previous reports on glucoamylase of rice-koji or commercial nuruk using fungi isolated from traditional nuruk. From these study, it is expected that making of improvement pellet nuruk would save the fermentation time considerably compared with traditional nuruks.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.32-37
• /
• 1997

The rate constants and activation energies for formation of two chemical markers, M-1 and M-2 at sterilization temperatures were determined in a meatball system. Destruction rates for bacterial spores were also determined. The rate constants for M-1 and M-2 formation at $121^{\circ}C$ were 0.03 and 0.28 Abs/min, respectively. The activation energies for M-1 and M-2 were 27.9 and 24.6 Cal/mol. M-2 was formed faster than M-1 and reached a maximum and decreased. M-1 formation continued up to 30 min at $121^{\circ}C$ and 10 min at $131^{\circ}C$, which makes M-1 a more useful chemical marker for high $F_0$ values. The D-values for spores (B. stearothermophilus ATCC 12980) at 111, 114.4, 117.7 and $121^{\circ}C$ were 7.5, 4.5, 1.9 and 0.58 respectively. At temperatures between 111 and $121^{\circ}C$, there was a liner correlation between destruction of the spores and the M-1 formation. It was difficult to get accurate D-value at $126^{\circ}C\;and\;131^{\circ}C$, because almost all spores were dead before temperature at the center of the meatball reached $126^{\circ}C$. These data suggest that the chemical marker should be used to evaluate overprocessing as well as microbial lethality in aseptic processing.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.231-237
• /
• 1984

Changes in available lysine and water soluble proteins were checked to obtain the desirable condition of processing for boiled Neverita didyma under the various autoclaving temperatures and times. It was also carried out to assess the affect of heat treatments upon the solubility of coagulable substances in boiled products. In order to evaluate the nutritional quality of processed Neverita didyma under the highest available lysine retention and without bacteria, it was studied the value of pepsin-pancreatin digest residue index in comparison with unprocessed (raw) material. The crude protein content of raw material was higher than that of the other mollusks, while the content of crude fat was showing lower value. It was noticed that the higher contents of coagulable substances and water soluble proteins in processed Neverita didyma were obtained under the conditions, retort temperature at $120^{\circ}C$ above, and 40-60 min. sterilization. After the pannel test, the coagulable substances were not found below the level of $0.40{\pm}0.03$ gram nitrogen/ml of juice. The remarkable retention of available lysine (FDNB-reactive lysine) was resulted in the conditions of autoclaving at $115^{\circ}C$ for 40 minutes in boiled Neverita didyma products, and that processing condition was coincide with the condition of commercial sterilization for boiled top shell. It was revealed that the boiled meat of Neverita didyma showed the higher PPDRI(65.85) than that of raw material (63.16).

• Food Science and Preservation
• /
• v.20 no.2
• /
• pp.250-256
• /
• 2013

To verify the multiplication of microorganisms on the surface of strawberries, the fate of E. coli $DH5{\alpha}::gfp$ at different temperatures, times and strawberry extract concentrations were measured. The population of E. coli $DH5{\alpha}::gfp$ rapidly increased by 7.36~7.78 log CFU/g at $25{\sim}30^{\circ}C$ for 24 hr and slowly increased by 6.49~8.49 log CFU/g at $10{\sim}20^{\circ}C$ for 48 hr. However, E. coli $DH5{\alpha}::gfp$ did not grow at $10{\sim}15^{\circ}C$ on the surface of the strawberries, regardless of the contact times with the bacterial suspension. E. coli $DH5{\alpha}::gfp$ reached 1.52~3.26 log CFU/g at $20^{\circ}C$ as the contact frequency increased from two to six times. The contact frequencies did not significantly differ. In the case of the six-time contact on the surface of the strawberry at 25 and $30^{\circ}C$, the E. coli $DH5{\alpha}::gfp$ increased by 5.17 and 5.01 log CFU/g. The effects of the strawberry extracts on the growth of E. coli $DH5{\alpha}::gfp$ showed that sterilization and non-sterilization do not affect the growth of microorganisms for 96 hr. In the minimal broth, the growth of E. coli $DH5{\alpha}::gfp$ increased by 1 log CFU/g for 96 hr. In less than 50 percent of the strawberry extracts, the growth rate of E. coli $DH5{\alpha}::gfp$ was higher than in the control and increased by 4 and 5 log CFU/g at 50 and 25 percent of strawberry extracts, respectively. Therefore, E. coli $DH5{\alpha}::gfp$ can multiply and survive on the surface of strawberries when it comes into contact with the fruit extract.