• Journal of the Optical Society of Korea
• /
• v.6 no.4
• /
• pp.150-155
• /
• 2002

Horizontally-moving method (HMM) stereoscopic camera has a liner relationship between ver-gence and focus control. We introduced the automatic control method for a stereoscopic camera system that uses the relationship between vergence and focus of an HMM stereoscopic camera. the Automatic control method uses disparity compensation of the acquired image pair from the stereoscopic camera. For faster extraction of disparity information, the proposed binocular dispar-ity estimation method by the one-dimensional cepstral filter algorithm would be investigated. The suggested system in this study substantially reduced the controlling time and error-ratio so as to make it possible to achieve natural and clear images.

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.91-96
• /
• 2004

Simultaneous CH and OH planar laser induced fluorescence(PLIF) and stereoscopic particle image velocimetry (PIV) measurements have been developed to investigate the local flame structure of turbulent premixed flames. The developed simultaneous two radical concentrations and three component velocity measurements on a two-dimensional plane was applied for relatively high Reynolds number turbulent premixed flames in a swirl stabilized combustor. All measurements were conducted for methane-air premixed flames in the corrugated flamelets regime. Strong three-dimensional fluctuation implies that misunderstanding of the flame/turbulent interactions would be caused by the analysis of two-component velocity distribution in a cross section. Furthermore, comparisons of CH-OH PLIF and three-component velocity field show that the burned gases not always have high-speed velocity in relatively high Reynolds number turbulent premixed flame. The Reynolds number dependence of the flame front was clearly captured by the simultaneous CH-OH PLIF and stereoscopic PIV measurements.

• Journal of the Korean Society of Visualization
• /
• v.5 no.1
• /
• pp.43-48
• /
• 2007

Micro-PIV(particle image velocimetry) has been widely used to measure the velocity of micro flow. Although this micro-PIV method can give accurate 2D instantaneous velocity information of mea-surement plane, it cannot resolve the out of plane component of velocity vectors. Lots of the micro fluidic devices generate three-dimensional flow and 3D measurement of velocity is useful to understand the physics of micro flow phenomena. In this study, we constructed stereoscopic micro-PIV(SMPIV) system and applied this method to the impinging micro jet flow. The results show that this method can produce accu-rate 3D reconstruction of micro jet flow.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.4
• /
• pp.225-235
• /
• 2010

People are getting more interested in 3D stereoscopic movie, but due to the sudden concern, there is less research how 3D stereoscopic movie influence on people. The present research aims at developing 3D stereoscopic movie measurement. For this, we tested three variables which are perceived functionality, impression, and presence. Perceived functionality is defined as how people perceive functions of 3D stereoscopic movie for instance depth, and impression is defined as how people integrate various information as a total image. Finally, presence is a psychological state that individual's perception fails to accurately acknowledge the role of the technology in the experience. As a result, perceived functionality consists of four factors, impression consists of eight factors, and presence consists of three factors. As an exploratory research, we cannot guarantee the validity of the measurement, but as a seminal research it is worthwhile to pay attention.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.575-578
• /
• 2001

원격 조작이나 해저 수중 탐사에서 실제와 같이 거리감을 인식하며 제어하기 위하여, 3차원 입체 영상 카메라 장치를 사용하고 있다. 기본적인 구성 형태인 Stereoscopic Camera 시스템은 기구적으로 주시각 제어와 초점 제어가 이루어 지고 있으며, 획득영상에 대하여 영상 distortion 보정, 압축 처리 등의 영상 신호처리가 행하여진다. 양안 카메라의 수평 위치를 일치시켜 수평적으로 동일 위치의 pixel들이 정확한 epipolar line을 형성할 경우에, 주시각 제어가 용이하고 보정 및 영상처리 등의 연산량이 대폭 감소된다. 이와 같은 calibration 과정을, 기존의 시스템에서는, 주로 영상 획득 포기에 패턴을 사용하여 실시하거나, 물리적 수평 장치와 sensor 등의 보조 장치를 이용하여 calibration을 행한다. 그러나, 기계적으로 정밀하게 정렬을 한다고 하여도 두 카메라의 광축 및 CCD조립상 상이점과 특성의 불일치로 인하여 실제 획득된 영상에서는 변이와 회전이 포함된 영상을 얻게된다. 본 논문에서는 Stereoscopic Camera의 위와같은 정렬 오류의 문제점을 분석한 후, 제안 방식으로서 두 카메라의 획득되는 영상을 직접 영상 처리하여 수직 방향 및 회전 오류를 최소화 시켜 정렬하는 새로운 방법을 제시하며, 실험적으로 제안 방식의 효율성을 보인다.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.11-14
• /
• 2002

A new high-definition stereoscopic PTV was constructed using two CCD cameras, stereoscopic photogrammetry based on a 30-PTV principle. The arrangement of the two cameras was based on angular position. The calibration of cameras and the pair-matching of the three-dimensional velocity vectors were based on Genetic Algorithm based 30-PTV technique. The constructed Stereoscopic PTV technique was tested on the standard images of the Impinging jet proposed by VSJ. The results on the turbulent properties of the jet obtained by the constructed system showed a good agreement with the original LES data.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.931-938
• /
• 2006

Using high resolution stereoscopic imaging system three digital elevation model of tunnel face is acquired. The images oriented within a given tunnel coordinate system are brought into a stereoscopic vision system enabling three dimensional inspection and evaluation. The possibilities for the prediction ahead and outside of tunnel face have been improved by the digital vision system with 3D model. Interpolated image structures of rock mass between subsequent stereo images will enable to model the rock mass surrounding the opening within a short time at site. The models shall be used as input to numerical simulations on site, comparison of expected and encountered geological conditions, and for the interpretation of geotechnical monitoring results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1607-1610
• /
• 2005

A new configuration of LCD projectors for polarized stereoscopic projection having no light loss in the polarization process is suggested. In the proposed system, two polarizing filters that are employed in the conventional LCD polarized stereoscopic projection system causing additional light loss and image distortion are excluded by taking into account of polarization property of the LCD projector and image processing techniques. From some experimental results by using the Type-1 LCD projectors, light loss of the proposed system occurring in the polarization process is found to be zero.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.436-442
• /
• 2018

In a spatially interlaced stereoscopic (SIS) three-dimensional (3D) display to be realized by providing the observer a part of left-eye/right-eye images, a loss of information can be perceived due to the un-shown part of each image. In order to resolve that problem, an improved SIS 3D display is proposed to deliver the images without loss of information to the observer using a time-multiplexing scheme. However, that time-multiplexing SIS also has a problem of luminance distortion when the desired luminance is not shown due to an insufficient response of the liquid crystal cell. In this paper, we propose a new method by optimizing the image data to show correct luminance with minimum distortion.

• Journal of the Optical Society of Korea
• /
• v.6 no.4
• /
• pp.143-149
• /
• 2002

In this paper, we present an algorithm for synthesizing intermediate views from a stereoscopic pair of images. Syntheses of intermediate images allows one to realize a more comfortable the 3D display system. The proposed method is based on block matching, which is not ordinarily used. The contour information is used for a block decision. In order to find an equivalent (or corresponding) block, there are two steps: "matching of contour-to-original image" and "matching of contour-to-contour image" methods. "Matching of contour-to-contour image" uses both left and right contour images. This block matching method allows us to find the corresponding block in spite of different block sizes. Experimental results illustrate the performance of the proposed technique and we obtained a high quality image of more than 31 dB PSNR.image of more than 31 dB PSNR.