• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.14-17
• /
• 2008

Recently, several advanced flow visualization techniques such as Particle Image Velocimetry (PIV) including stereo PIV, holographic PIV, and dynamic PIV have been developed. These advanced techniques have strong potential as the experimental technology which can be used for verifying numerical simulation. In addition, there would be indispensable in solving complicated thermo-fluid flow problems not only in the industrial fields such as automotive, space, electronics, aero- and hydro-dynamics, steel, and information engineering, but also in the basic research fields of medical science, bio-medical engineering, environmental and energy engineering etc. Especially, NT Nano Technology) and BT (Bio Technology) strongly demand these advanced measurement techniques, because it is difficult for conventional methods to observe most complicated nano- and bio-fluidic phenomena. In this paper, the basic principle of these advanced visualization techniques and their practical applications which cannot be resolved by conventional methods, such as flow in automotive HVAC system, ship and propeller wake, three-dimensional flow measurement in micro-conduits, and flow around a circulating cylinder will be introduced.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.14-17
• /
• 2008

Recently, several advanced flow visualization techniques such as Particle Image Velocimetry (PIV) including stereo PIV, holographic PIV, and dynamic PIV have been developed. These advanced techniques have strong potential as the experimental technology which can be used for verifying numerical simulation. In addition, there would be indispensable in solving complicated thermo-fluid flow problems not only in the industrial fields such as automotive, space, electronics, aero- and hydro-dynamics, steel, and information engineering, but also in the basic research fields of medical science, bio-medical engineering, environmental and energy engineering etc. Especially, NT (Nano Technology) and BT (Bio Technology) strongly demand these advanced measurement techniques, because it is difficult for conventional methods to observe most complicated nano- and bio-fluidic phenomena. In this paper, the basic principle of these advanced visualization techniques and their practical applications which cannot be resolved by conventional methods, such as flow in automotive HVAC system, ship and propeller wake, three-dimensional flow measurement in micro-conduits, and flow around a circulating cylinder will be introduced.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.437-441
• /
• 1997

In the conventional remote monitoring system, a user in front of a computer monitor can acquire only 2 dimensional visual information in a passive way. Thus, even thoght the user finds an interesting object from the video image, helshe can hardly acquire additional information on the object such as name. 311 shape, etc. In this paper, an active monitoring system that shows additional information on the selected object is proposed. The active remote monitoring system can calculate the 3D position of the object that is selected in the video images. Then, using the 3D position of the object, other information on the object can be retrieved from the database and shown on the screen. To calculate the 3D position of the object, 2 CCD cameras that can be tilted and panned using 3 stepping motors are used. The algorithm of 3D position calculation and the result of experiments are explained.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.637-642
• /
• 2006

A plastic zone size is regarded as a measure of material resistance, and also it determines the fracture behavior. The importance of estimating or measuring the plastic zone size cannot be too emphasized. In this article, SDSP(Stereo Digital Speckle Photography) is examined as a new techniques to measure the plastic zone developed in a ductile metal. This technique is simple, vibration free and non-contact, and measures simultaneously in-plane displacements as well as out-of plane displacements like the side necking. Experimental results for a CT specimen are presented to demonstrate the accuracy in comparison with those obtained by recrystallization technique and finite element analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.270-273
• /
• 1999

Circular dynamic stereo has special advantages as it enables a 3-D measurement using a single TV camera and also enables a high accurate measurement without a cumbersome calibration. Annular particle streaks are recorded using this system and the size of annular streaks directly concerns to the depth from TV camera. That is, the size of annular streaks is inversely proportional to the depth from the TV camera and the depth can be measured automatically by image processing technique. Overlapped streaks can be processed also by our method. The flow measurement in a water tank is one of the applications of our system. Tracer particles are introduced into the water in a flow measurement. Since the tracer particles flow with water, three-dimensional velocity distributions in the water tank can be obtained by measuring the all movement of tracer particles. Experimental results demonstrate the feasibility of our method.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.37-40
• /
• 2008

The purpose of this paper is to extract DEMs from Spot-3 strips using orbit modeling technique. Spot-3 stereo strip images along 420km in distance were used for experiments. The orbit modeling technique has been suggested to establish accurate geometric models for a whole strip taken on the same orbit using only a small number of GCPs on the top area of the strip. This method enables extraction of orientation parameters of the scene along the strip that is needed to generate DEMs. Consequently, we were able to extract DEMs over the areas without accurate GCPs obtained by GPS surveying per each scene. Assessment of accuracy was carried out using USGS DTED. DEMs generated from the orbit modelling technique suggested showed satisfactory performance when quantitative analysis of accuracy assessment was carried out.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.161-168
• /
• 2004

우리가 살아가는 3차원 이상의 지형공간을 영상으로 구형하기 위하여 필수적으로 요구되는 DEM을 비교적 손쉽게 확보할 수 있는 SPOT 영상을 이용하여 자동으로 생성할 수 있는 방법을 제시하고 에피폴라 투영법에 의한 결과영상의 평가를 통하여 몇 가지 좋은 방법을 제안하고자 한다 현재 보유하고 우리나라 춘천시의 SPOT 위성 팬크로 영상과 수치지도의 DEM영상과의 생성결과를 비교 평가하였다. SPOT2-3호(10m)에서 수집한 중복영상에서 자동으로 수치표고모델을 작성함으로서 다양한 영상정보의 활용이 가능해 따라 입체영상지도제작 및 분석이 가능해지고 있다. 본 연구에서는 SPOT 60km의 춘천지역을 대상으로 한눈에 영상과 영상을 재현할 수 있도록 고해상도의 인공위성 영상자료를 처리하여 영상지도를 제작하기 위한 수치표고모형을 자동으로 추출할 수 있도록 하였다.

• The KIPS Transactions:PartB
• /
• v.10B no.2
• /
• pp.157-162
• /
• 2003

In this paper, in-depth considerations are given to various techniques suggested for photographic 3D modelling and possible enhancements of the techniques are discussed. It is found that both the improvement of fundamental matrix estimation techniques and the stereo image rectification processing stage are necessary for more accurate 3D modelling.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.591-593
• /
• 1998

실제감을 가지는 가상의 환경을 만들고, 사용자의 interaction에 맞추어 가상 환경과오브젝트를 조정하는 분야는 최근에 들어 많은 관심을 끌고 있다. 본 논문에서는 실제 영상을 이용하여 3차원 오브젝트 모델링 및 합성하는 방법에 대한 논의를 하였다. 실제 영상에서 깊이 정보를 얻어내는 방법으로는 다해상도 다기선 스테레오 정합 기법(multi-resolution multiple-baseline stereo matching technique : MR-MBS)을 이용하였으며, 실제 영상에서 생성된 모델을 Open Inventor 환경에서 모델을 재구성하고 performer를 이용하여, 최종적인 합성 영상을 만들어 내었다. 합성된 임의시점에서의 영상에서 사용자 조작에 따라 각각의 오브젝트를 조정 할 때 결과 영상을 실시간으로 얻을 수 있었고, 실제 영상의 텍스춰를 그대로 사용함으로써 실제감을 높일 수 있었다.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.310-313
• /
• 2007

In this study, a new technique for atmospheric transmittance estimated from ALOS PRISM data is developed. It is based on satellite's observing radiances of different view angles and assumes that the cause of difference in radiances is the different view angles. The ALOS PRISM has three independent optical systems for viewing forward and backward and producing a stereoscopic image along the satellite's track. This stereo pair data can be used to estimate the transmittance according to the radiative transfer theory. This derived transmittance will be validated by the AERONET data and compared with the MODTRAN4 simulation results. Results show that the higher the land cover albedo, the better the derived transmittance compared to the AERONET data. Besides, this technique also shows the transmittance retrieval will be underestimated for the low land cover albedo.