DOI QR코드

DOI QR Code

In-situ Measurement of Plastic Zone Developed During Ductile Fracture Process

연성 금속의 파괴과정에서 발생하는 소성영역의 현장 측정

  • 백정현 (전남대학교 대학원 기계공학과) ;
  • 김도형 (전남대학교 대학원 기계공학과) ;
  • 강기주 (전남대학교 공과대학 기계시스템공학부)
  • Published : 2006.06.01

Abstract

A plastic zone size is regarded as a measure of material resistance, and also it determines the fracture behavior. The importance of estimating or measuring the plastic zone size cannot be too emphasized. In this article, SDSP(Stereo Digital Speckle Photography) is examined as a new techniques to measure the plastic zone developed in a ductile metal. This technique is simple, vibration free and non-contact, and measures simultaneously in-plane displacements as well as out-of plane displacements like the side necking. Experimental results for a CT specimen are presented to demonstrate the accuracy in comparison with those obtained by recrystallization technique and finite element analysis.

Keywords

References

  1. Iino, Y. 1976, 'Accmnulated Plastic Zone Around Fatigue Crack in Type 304 Stainless Steel,' Metal Sci. Vol. 10, pp. 159-164 https://doi.org/10.1016/0036-9748(76)90139-3
  2. Shoji, T. 1981, 'Deformation of Crack Tip Energy Dissipation and Elastic-Plastic Toughness Parameter with Ductile Crack Extension,' Journal of Testing and Evaluation, Vol. 6, pp.324-334
  3. Tschegg, E., Faltin, C. and Stanzl, S. 1980, 'X-Ray Microbeam and Recrystallization Studies of Plastic Deformation Around Fatigue Crack,' J. Mater. Sci. Vol. 15, pp.131-138 https://doi.org/10.1007/BF00552437
  4. Biognonnet, A., Dias, A. and Lebrun, J. L. 1989, 'Fatigue Failure Analysis by X-Ray Fractography,' Proc. 7th Canf on Fracture(ICF7)V, Pergamon Press, Oxford, pp. 3457-3463
  5. Yokobori, T., Sato, K and Yaguchi, H. 1973, 'Observation of Microscopic Plastic Zone and Slip Band Zone at the Tip of Fatigue Crack,' Report of the Research Institute for Strength and Fracture of Materials, Vol. 9, Tohoku University, pp.1-10
  6. Matsumoto, T. and Kiagawa, H. 1972, 'X-Ray Investigation of Fatigue Crack Growth on Critical Strain for Fracture at the Crack Tip,' Proc. Int. Canf. on Mechanical Behavior of Materials II, The Society of Materials Science, Japan, pp. 59-66
  7. Lee, J.H., Kang, K.J. 2004, 'In-situ Measurement of Laterial Side-Necking of a Fracture Specimen Using a Stereo Vision and Digital Image Correlation,' Journal of the Korean Society of Precision Engineering, pp. 154-161
  8. Kim, D.H., Kang, K.J. 2006, 'Relationships between Side Necking and Plastic Zone size Near a Crack Tip in Ductile models. Part I: Modified Boundry Solutions,' submitted to Engineering Fracture Mechanics
  9. Johnson, P. 1998, 'Strain Field Measurements with Dual-Beam Digital Speckle Photography', Optics and Lasers in Engineering. Vol. 30, pp. 315-326 https://doi.org/10.1016/S0143-8166(98)00021-9
  10. Yamaguchi, I, 1981, 'A Laser-Speckle Strain Gauge,' Journal of Physics E: Scientific Instruments. Vol. 14, pp. 1270-1273 https://doi.org/10.1088/0022-3735/14/11/012