• 전자공학회논문지CI
• /
• 제47권5호
• /
• pp.1-9
• /
• 2010

일반적으로 동적 손동작 인식을 위해서는 전처리, 손 추적, 손 모양 검출의 단계가 필요하다. 본 논문에서는 전처리와 손 모양 검출 방법을 개선함으로써 성능을 향상시킨 동적 손동작 인식 방법을 제안한다. 전처리 단계에서는 동적테이블을 이용하여 노이즈제거 성능을 높이고, YCbCr 컬러공간을 이용한 기존의 피부색 검출 방식에서 피부색의 범위를 조절할 수 있도록 하여 피부색 검출 성능을 높인다. 특히 손 모양 검출 단계에서는 가이드라인을 이용하여 동적 손동작 인식의 요소인 시작이미지(Start Image)와 정지 이미지(Stop Image)를 검출하여 동적 손동작을 인식하기 때문에 학습예제를 사용한 손동작 인식 방법에 비해 인식 속도가 빠르다는 이점이 있다. 가이드라인이란 웹캠을 통해 입력되는 손의 모양과 비교하여 검출하기 위해 화면에 출력하는 손 모양의 라인이다. 가이드라인을 이용한 동적 손동작 인식 방법의 성능을 평가하기 위해 웹캠을 사용하여 복잡한 배경과 단순한 배경으로 구분된 9가지 동영상을 대상으로 실험하였다. 그 결과 CPU 점유율이 낮고, 메모리 사용량도 적기 때문에 시스템 부하가 높은 환경에 효과적임을 알 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.768-779
• /
• 1995

This study was performed to investigate the effect of root canal shaping techniques on the change of the shape of prepared root canal. 40 mesiobuccal canals of recently extracted mandibular 1st and 2nd molars were divided into 4 groups and shaped by step-down/balanced force technique, step-down/step-back technique, step-back technique and conventional technique respectively. The change of the shape of root canal was traced by superimposing the radiographs obtained before and after shaping of each root canal. The results were as follows. 1. By the experimented techniques except conventional technique, the root canals were more shaped in convex side of apical area and in concave side of most curved and coronal area than in the other sides(P<0.05). By conventional technique, the root canals were more shaped in convex side than in convave side from apex to orifice(P<0.05). 2. By step-down/balanced force technique, the cancave sides at C and D points of proximal view and C point of clinical view were more shaped than the convex side(P<0.05). Through the entire canal, the concave side was more shaped than the convex side in proximal view(P<0.01). But there was no statistical difference between both sides in clinical view. 3. By step-down/step-back technique, the change of root canal shape was not statistically different in concave and convex sides at each point of both views(P>0.05). And through the entire canal in proximal view, there was no statistical difference in shaping percentage between both sides. But through the entire canal in clinical view, the concave side was more shaped than the convex side(P<0.1). 4. By step-back technique, the convex side at B point of clinical more shaped than the other sides(P<0.05). Through the entire canal in proximal and clinical views, there was no statistical difference in shaping percentage between both sides. 5. Comparing the total shaping percentage among techniques, that in conventional technique was the greatest numerically, and followed by the percentages in step-down/step-back, step-down/balanced force and step-back technique. But, in proximal view, shaping percentages were not statistically different among techniques(P>0.05, ANOVA test). In clinical view, shaping percentages in step-back and conventional techniques were statistically different(P<0.01, ANOVA test). * Proximal view: radiograph taken in mesiodistal direction. * Clincal view: radiograph taken in faciolingual direction. A point : 1mm point from radiographic apex B point : center point between A and C points C point : most curved point of root canal D point : center point between C point and canal oriffice.

• 한국생산제조학회지
• /
• 제23권5호
• /
• pp.512-518
• /
• 2014

In this paper, the influence of part shape complexity and die type on forming accuracy in incremental sheet metal forming is presented. The part shape complexities are classified into two types, namely, of one and two-step shapes. Correspondingly, die types are classified into three types, namely, of no-, partial, and full die types. The experimental tests are performed separately on negative and positive forming methods. It is shown that for the one-step shape, there are no significant differences in forming errors between the cases of no- and full die types when the negative forming method is used. Furthermore, the full die type is better than the partial die when positive forming is used. For the two-step shape case, the full die type always exhibits better forming accuracy than the no- and partial die types, irrespective of the forming method used.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.175-182
• /
• 1998

The object of this study is shape finding and cutting pattern generation of membrane structures under the following assumptions : (1) material is linearly elastic (2) stress state is plane stress. Cable and membrane structures should introduce the nonlinear analysis considering geometric nonlinearity because these structures deform largely under the external loads. The analysis procedure is consisted of three steps considering geometric nonlinearity unlike any other structures. First step is the shape finding analysis to determine the initial equilibrium shape. Second step is the stress-deformation analysis to investigate the behaviors of structures under various external loads. Once a satisfactory shape has been found, a cutting pattern based on the shape finding analysis may be generated from the view point of construction. In this paper, (1) shape finding analysis formulation and an example, (2) cutting pattern determination procedure using weighted least-square minimization flattening method and some results are presented.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제20회 발표논문집
• /
• pp.66-71
• /
• 2004

When waterlogged wood dries up, it shrinks largely. And it is hard to recover original shape. Therefore it happens to lose the value of wood remains frequently. This paper studied how far dried waterlogged wood can recover original shape. Shape recovering course and extent are thoroughly investigated after waterlogged wood of Pinus densiflora, Quercus serrata and Styrax japonica oven-dries and instills varieties of test solution. At 1- step, oven-dried samples infiltrated by chlorous acid sodium or sodium hydroxide solution. At 2- step, wood tissues of samples were swelled by the fast decompression after infiltrating $CO_2-supercritical$ fluid at high pressure. The study investigated the possibility of shape recovering in waterlogged wood. Shape recovering rate is different with solution and wood species. Sample of sodium hydroxide solution doesn't swell anymore when using $CO_2-supercritical$ fluid. In general, the sample of sodium hydroxide solution has higher Shape recovering rate than $CO_2-supercritical$ fluid solution treated by chlorous acid sodium.

• 한국환경과학회지
• /
• 제27권11호
• /
• pp.1023-1028
• /
• 2018

Shape memory materials are widely used in high-tech industries. Although shape memory polymers have been developed, they have a disadvantage, only unidirectional resilience. Shape memory polymers with bi-directional recovery resilience have been actively studied. In this study, a bidirectional shape memory polyurethane was synthesized using poly(${\varepsilon}$-caprolactone) diol, methylene dicyclohexyl diisocyanate, and hydroxyethyl acrylate. The first physical curing occurred between hard segments and hydrogen bondings when the solution was dried. The second curing in acrylate groups was performed by UV exposure. A degree of curing was analyzed by infrared spectroscopy. The shape memory properties of 2 step-cured polyurethanes were investigated as a function of UV curing time.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.573-576
• /
• 1999

This paper presents a new shape segmentation algorithm. The procedure to achieve complete segmentation consists of two steps : the first step is mapping shape into two dimension by the using Distance Transform, the second step is partitioning the region by using the Watershed algorithm. As a application of the proposed algorithm, we perform the matching experiment for several objects by the use of segmented region. Simulation results demonstrate the efficiency of the proposed method, and the method has scale, rotation, and shift invariant properties.

• 한국공간구조학회논문집
• /
• 제11권3호
• /
• pp.125-135
• /
• 2011

본 연구에서는 morphogenesis 기법의 L-system 모델을 사용하여 대공간 구조물의 형태 생성 방안을 제공하고자 한다. 이와 같은 L-system 모델은 일반적으로 식물의 성장 과정을 시각화하기 위해 적용되어 왔으나 본 연구는 이를 건축 분야에 적용하기 위한 프로세스가 제안된다. L-system 모텔은 크게 문자열 생성 단계와 문자열 분석 단계로 구성되어 있다. 문자열 생성 단계에서는 초기문자열로부터 최종 문자열을 생생하며, 문자열을 생성하기 위해서는 alphabet, axiom 및 rule에 대한 정의가 필요하다. 또한 문자열 해석 단계에서는 문자열의 의미 부여에 따라 다양하게 해석될 수 있다. 특히 다양한 적용 예제를 통해 대공간 구조물의 형태 생성 모델을 구현한다.

• 한국발생생물학회지:발생과생식
• /
• 제11권1호
• /
• pp.31-41
• /
• 2007

작은땃쥐(Crocidura shantungensis)의 정자 변태에 대한 연구를 전자현미경을 이용한 방법을 통해 이루어졌다. 정자세포의 핵과 세포질내 소기관의 형태학적 특징을 기초하여 정자 변태 전 과정을 11기(phase) 15 단계(step)로 각각 구분되었다. 골지 및 두모 단계의 정자세포가 구형인데 반해 첨체 전기에는 타원형으로 변하고, 이 시기부터 꼬리가 생성되기 시작하였고, 성숙기에는 가늘고 긴 정자 두부가 형성되었다. Step 7까지는 정자세포의 두부 방향이 내강쪽을 향하고 있는데 반해 step 8부터 step 15까지는 세정관 상피의 기저막쪽으로 향하였다. Step 12에서 정자세포는 핵과 첨체가 최대로 신장되어 나타났다. Step 13에서부터 정자세포의 핵은 납작해지고, 첨체는 납작하게 확장되면서 전체길이는 짧아지는 경향을 보였다. Step 14에 도달한 정자세포의 첨체는 정자 두부와 더불어 최종적인 모양을 취하게 되고, 핵은 쐐기모양을 하고 있으며, 염색질은 완전히 응축되고 균질화 되어졌다. 이탈기(spermiation phase)의 정자세포는 세르톨리 세포의 세포질로부터 점차적으로 떨어져 나갔으며, 이 시기에 정자세포의 첨체는 짧아지고 납작해져서 완전한 정자를 형성하였다. 이상의 결과를 종합하여 볼 때, 정자 변태과정은 정자 형성세포의 분화 단계를 분석하는데도 유용한 정보를 제공하리라 여겨진다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.266-273
• /
• 1998

The object of this study is shape finding and cutting pattern generation of membrane structures under the following assumptions: (1) material is linearly elastic (2) stress state is plane stress. Cable and membrane structures should introduce the nonlinear analysis considering geometric nonlinearity because these structures deform largely under the external loads. The analysis procedure is consisted of three steps considering geometric nonlinearity unlike any other structures. First step is the shape finding analysis to determine the initial equilibrium shape. Second step is the stress-deformation analysis to investigate the behaviors of structures under various external loads. Once a satisfactory shape has been found, a cutting pattern based on the shape finding analysis may be generated from the view point of construction. In this paper, after shape finding analysis, cutting pattern determination procedure using weighted least-square minimization flattening method and some results are presented.