• 자원리싸이클링
• /
• 제9권2호
• /
• pp.3-10
• /
• 2000

알루미늄 폐캔은 중요한 재활용 자원으로서 알루미늄 캔용 원소재 판재는 물론 알루미늄의 국내소요량을 전량 수입에 의존하고 있는 우리나라로서는 활용 가능한 알루미늄폐캔의 재활용율을 높여야 하는 것은 외화절약과 환경보호 측면에서 대단히 중요하다. 사용한 알루미늄 캔을 다시 캔으로 재활용 하는 단계는 폐캔의 수집, 파쇄, 선별, 도료제거, 용해 및 2차지금을 제조하는 단계와 이 2차지금을 이용하여 열처리, 열간 및 냉간압연, 중간소둔처리 등을 거쳐 다시 캔을 성형하는 2단계로 나눌수 있다. 본 자료에서는 이러한 알루미늄 캔의 재활용 기술에 대한 우리나라와 선진국들의 현황과 전망을 소개하였다.

• 한국전기전자재료학회논문지
• /
• 제22권1호
• /
• pp.47-52
• /
• 2009

We studied the electrical characteristics of low-k SiOCH interlayer dielectric(ILD) films fabricated by plasma enhanced chemical vapor deposition (PECVD). BTMSM precursor was evaporated and introduced with the flow rates from 16 sccm to 25 sccm by 1 sccm step with the constant flow rate of 60 sccm $O_2$ in process chamber. The vibrational groups of SiOCH thin films were analyzed by FT!IR absorption lines, and the dielectric constant of the low-k SiOCH thin films were obtained by measuring C-V characteristic curves. The heat treatment on SiOCH thin films reduced the FTIR absorption intensity of the Si-O-$CH_3$ bonding group and Si-$CH_3$ bonding group but increased the intensity of Si-O-Si(C) bonding group. The SiOCH ILD films could have low dielectric constant $k\;{\simeq}\;2$ and also be reduced further by decreasing the $CH_3$ group density and increasing Si-O-Si(C) group density through annealing process.

• Transactions on Electrical and Electronic Materials
• /
• 제3권3호
• /
• pp.8-13
• /
• 2002

Controlled precipitation of quasi-binary semiconductor system is newly proposed as an effective and reliable technique for the formation of well-defined and crystallographically aligned semiconductor nanostructures. Using HgTe-PbTe quasi-binary semiconductor system, self-aligned HgTe nanocrystallites distributed three dimensionally within PbTe matrix were successfully formed by the simple three step heat treatment process routinely found in age hardening process of metallic alloys. Examination of the resulting nano precipitates using conventional transmission electron microscopy (CTEM) and high resolution TEM (HRTEM) reveals that the coherent HgTe precipitates form as thin discs along the (100) habit planes making a crystallographic relation of {100}$\_$HgTe///{100}$\_$PbTe/ and [100]$\_$HgTe///[100]$\_$PbTe/. It is also found that the precipitate undergoes a gradual thickening and a faceting under isothermal aging up to 500 hours without any noticeable coarsening. These results, combined with the extreme dimension of the precipitates (4-5 nm in length and sub-nanometer in thickness) and the simplicity of the formation process, leads to the conclusion that controlled precipitation is an effective method for preparing desirable quantum-dot nanostructures.

• 대한화학회지
• /
• 제65권2호
• /
• pp.125-132
• /
• 2021

An electrochromic nickel oxide thin film was fabricated on a flexible PET/ITO substrate using a nanocrystallite- dispersed coating sol and bar coater. Nanocrystalline NiOx of 3-4 nm crystallite size was first synthesized by base precipitation and thermal conversion. This NiOx nanocrystallite powder was mechanically dispersed in an alcoholic solvent mixed with a silane binder to prepare a coating sol for thin film. This sol method is different from the normal sol-gel method in that it does not require the conversion of precursor by heat treatment. Therefore, this method provides a very facile method to prepare NiOx thin films on any kind of substrate and it can be easily applied to mass production. The electrochromic performance of this NiOx thin film on PET/ITO electrode with a thickness of about 400 nm was investigated in a nonaqueous LiClO4 electrolyte solution by cyclic voltammetric and repeated chronoamperometric measurements in conjunction with spectrophotometry. The visible light modulation of 44% and the colorization efficiency of 41 ㎠/C at 550 nm were obtained at the step potentials of -0.8/+1.2 V vs Ag and a duration of 30 s.

• 대한금속재료학회지
• /
• 제49권11호
• /
• pp.910-915
• /
• 2011

The microstructures and mechanical properties of roll-bonded STS439/Al1050/STS304 clad materials were investigated after an annealing process at various temperatures. Interfacial layer was developed at the STS439/Al1050 and Al1050/STS304 interfaces at $550^{\circ}C$. STS439/Al1050/STS304 clad metals fractured suddenly in a single step and the fracture decreased with increasing annealing temperatures at $450^{\circ}C$. After annealing at $550^{\circ}C$, samples fractured in three steps with each layer fracturing independently. Interfacial layers formed at $550^{\circ}C$ with a high Vickers microhardness were found to be brittle. During tensile testing, periodic parallel cracks were observed at the interfacial reaction layer. Observed micro-void between Al1050 and the interfacial layer was found to weaken the Al1050/reaction layer interface, leading to the total separation between Al1050 and the reaction layer.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.961-968
• /
• 2022

Hydrogen embrittlement leads to the damages in bolts, nut, especially, high pressure valves, in the semiconductor facilities, hydrogen vehicles, hydrogen stations and so on. Monel material has higher strength than SUS material. Therefore, even though Monel material with special alloy is usually used to prevent the hydrogen embrittlement, it needs powerful drawing system to manufacture the rectangular or hexagonal bar using circular bar. The purpose of this study is to investigate the characteristics of plastic deformation of Monel material and 2 rollers of rolling unit in plastic limit through numerical analysis. As the results, it was predicted that, based on mean stress, as the rolling step was increased, the rolling force of rolling unit was decreased. In addition, the heat treatment for Monel material was needed because of residual stress due to plastic deformation. As for rollers, the roller was safe about 1.86 times compared with that of ultimate strength. In this study, as the roller 2 showed larger stress than roller 1, thus, roller 2 should be designed carefully to guarantee the safety. Further it was confirmed that the reaction force of roller could be helpful in bearing design.

• 소성∙가공
• /
• 제32권4호
• /
• pp.180-190
• /
• 2023

This study deals with residual stress prediction and hardness evaluation within cross ball grooved inner race fabricated by cold upsetting process consisted of upsetting and ejection steps. A raw workpiece material of AISI 5120H (SCr420H) is first spheroidized and annealed, then phosphophyllite coated to form solid lubricant layer on its outer surface. To investigate influences of the heat treatment, uni-axial compression tests and Vickers micro-hardness measurements are conducted. Three-dimensional elasto-plastic FE simulations on the upsetting step and the ejection one are performed to visualize the residual stress and the ductile (plastic deformation) damage. External feature of the fabricated inner race is fully captured by using an optical 3D scanner, and the micro-hardness is measured on internal cross-sections. Consequently, the dimensional compatibility between the simulated inner race and the fabricated one is ensured with a difference of under 0.243mm that satisfied permissible error range of ±0.50mm on the grooved surface, and the predicted residual stress is verified to have similar distribution tendency with the measured Vickers micro-hardness.

• 사상체질의학회지
• /
• 제10권2호
• /
• pp.15-28
• /
• 1998

One's constitution is formed congenitally and is also acquired, and is relatively stable in its individually manifested function, structure and temperament. It has characteristics of universality, complexity, generality and continuity. It is also manifested in physiological responses and expresses pathologic tendencies including susceptibility. Attempts at understanding constitution has had a long history throughout the world. In Oriental Medicine, the constitution had been acknowledged from the "Huangdi Neijing", which has been a bible in Oriental Medicine for about two thousand years. In many aspects, the "Huangdi Neijing" provides the basis for both basic and practical fields. In order to derive the ideal structure from the "Huangdi Neijing" to Lee Je-ma's(Lee Jayma's) Sasang Constitutional ideas, which can strengthen the understanding of ideal core of Oriental Medicine's constitutional characteristics, the author launched his analysis of the constitutional understandings in the "Huangdi Neijing" as a first step and came to the following: 1. The constitutional understanding in the "Huangdi Neijing" was done both via the physiological responses to heat, pain and acupuncture treatment and the pathologic tendencies via body structure, strength, body heat, courage and obesity. 2. It was recognized that the constitution was formed congenitally and also acquired factors like living conditions including food customs, residents and geographical conditions were explained in detailed. 3. The constitutional typology was suggested both by the general and systematic criterion according to the Yin-yang and the Five phase theories and by single criterion such as obesity, courage and the response to acupuncture treatment. 4. As diagnosis is related to the constitution, courage was adopted for the disease caused by emotions, obesity was for its manifestations of qi and blood, the quantities of qi-blood and Yin-yang in the typology by the Yin-yang and Five phase theories were suggested. 5. In the case of obesity, Yin-yang and Five phase theory, treatment according to the constitutional ideas was mentioned, and their goals were concluded as "being the balancing between Yin and Yang" which means the Yin-yang theory is more practical than the Five phase theory in Oriental Constitutional Medical field. According to the above understandings, the author would like to suggest that the constitutional ideas in the "Huangdi Neijing" based on the Yin-yang theory blossomed via the practical spirit of Zhang Zhong-jing's "Shanghanlun" and at last from Lee Je-ma's(Lee Jayma's) Sasang Constitutional Medicine which realized "the balancing between Yin and yang" through the practical applications of herbal treatments.

• 한국재료학회지
• /
• 제11권2호
• /
• pp.94-103
• /
• 2001

졸-겔공정을 이용하여 SiO$_2$ 및 TEOS에 유기 고분자로서 PDMS가 도입된 PDMS/SiO$_2$ xerogel을 제조하고 촉매로서 HCI과 NH$_4$OH를 이용한 2 step acid/base catalyzed공정에 의해 SiO$_2$ 및 PDMS/SiO$_2$ xerogel의 기공 크기 및 분포를 제어하였다. 촉매로서 HCl이 첨가된 SiO$_2$ 및 PDMS/SiO$_2$ xerogel에서 PH는 2.3~2.5, gel화 시간 12~13일, xerogel의 모양은 Pellet형태를 나타내나 HCl/NH$_4$OH 몰비가 증가하면 pH 및 gel화 시간은 급격히 감소하고 xerogel의 모양도 pellet형과 column형으로 뚜렷하게 구분된다. 이는 반응의 최종용액이 산성이면 가수분해속도가 축합속도보다 빠르게 진행되어 9el화에 오랜 시간이 소요되어 pellet형의 Xerogel이 되나 약산성에서는 축합속도가 가수분해속도보다 빠르게 되어 gel화 시간은 빨라지고 column형의 xerogel이 되기 때문이다 SiO$_2$ 및 PDMS/SiO$_2$, xerogel의 표면적 및 평균기공크기는 HCl/NH$_4$OH 몰비가 증가함에 따라 각각 400$\rightarrow$600($\m^2$/g)과 15$\rightarrow$28$\AA$ 으로 변화하고 단일 기공크기분포를 갖는다. 이는 초기에 HCl에 의해 가수분해된 종이 NH$_4$OH에 의해 축합속도가 촉진되어 silica의 골격구조가 낮은 온도에서 규칙적으로 형성되고 열처리에 의해 균일한 기공으로 되었기 때문이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권10호
• /
• pp.1507-1516
• /
• 2002

Meat and bone meal is a valuable protein and mineral source in diets of production animals and contributes to the protein, energy and mineral component of diets. The aim of the present study was to more accurately characterise the apparent ileal amino acid digestibility of meat and bone meals produced in New Zealand and evaluate routine in vitro assays used in practise to measure meat and bone meal quality. A total of 94 commercial meat and bone meals from 25 New Zealand rendering plants over a two and a half year period were analysed for proximates, gross energy, gross amino acid content (incl. hydroxyproline, hydroxylysine and lanthionine), apparent ileal amino acid digestibility, pepsin nitrogen digestibility, protein solubility and bone content. The mean crude protein content of the 94 meat and bone meal samples was 56.8% with a range of >35% units and a coefficient of variation of 9.8%. The mean crude fat and ash content were 10.0 and 28.4% respectively. These latter components showed a large range (16 and 43%, respectively) with coefficients of variation above 22%. Amino acid digestibility between samples was highly variable with lysine and sulphur amino acids digestibility ranging between 45.8-89.0 and 38.2-85.5%, respectively. Pearson correlation coefficients are presented between crude protein content and individual gross amino acids, crude protein content and individual digestible amino acid content, and pepsin N digestibility and individual digestible amino acid content. There was a significant relationship between the digestible amino acid nitrogen content and the crude protein content while pepsin nitrogen digestibility was not correlated to ileal amino acid nitrogen digestibility (r=-0.06). Meat meals with a high protein content had relatively low hydroxyproline and hydroxylysine levels something that was attributed to the levels of collagen from bone. The data indicated that lanthionine (formed upon heat treatment of cysteine with a hydroprotein) is not a good indicator of the heat treatment employed to meat and bone meals. Step-wise multiple regression equations to predict the apparent digestible content of amino acids from rapid in vitro assays are presented. The most selected variables included ash and crude fat content. In general the equations derived for the essential amino acids had a higher degrees of fit (R2) compared to the non-essential amino acids. The R2 for the essential amino acids ranged from 0.43 for histidine and 0.68 for leucine. These equations provide a means of more rapidly estimating the apparent ileal digestible amino acid content (protein quality) of meat and bone meal using standard analyses.