• Carbon letters
• /
• 제10권3호
• /
• pp.217-220
• /
• 2009

In this study, porous electrospun carbon fibers were prepared by electrospinning with PAN and $MgCl_2$, as a MgO precursor. MgO was selected as a substrate because of its chemical and thermal stability, no reaction with carbon, and ease of removal after carbonization by dissolving out in acidic solutions. $MgCl_2$ was mixed with polyacrylonitrile (PAN) solution as a precursor of MgO with various weight ratios of $MgCl_2$/PAN. The average diameter of porous electrospun carbon fibers increased from 1.3 to 3 ${\mu}m$, as the $MgCl_2$ to PAN weight ratio increased. During the stabilization step, $MgCl_2$ was hydrolyzed to MgOHCl by heat treatment. At elevated temperature of 823 K for carbonization step, MgOHCl was decomposed to MgO. Specific surface area and pore structure of prepared electrospun carbon fibers were decided by weight ratio of $MgCl_2$/PAN. The amount of hydrogen storage increased with increase of specific surface area and micropore volume of prepared electrospun carbon fibers.

• 한국재료학회지
• /
• 제1권2호
• /
• pp.99-104
• /
• 1991

Ta-silicide의 게이트 전극 및 비트라인(bit line)으로의 사용가능성을 알아보기 위하여 As, P, $BF_2$가 $5{\times}10^15cm^-2$의 농도로 이온주입된 다결정 실리콘에 탄탈륨을 스퍼터링으로 증착한 후 급속 열처리로 Ta-silicide를 형성하였다. 형성된 Ta-silicide의 특성은 4-탐침법, X-rayghlwjf, SEM 단면사진과 ${\alpha}$-step으로 조사하였으며, 불순물들의 거동은 Secondary Ion Mass Spectroscopy(SIMS)로 알아보았다. $TaSi_2$의 형성은 $800^{\circ}C$에서 시작하며 $1000^{\circ}C$ 이상에서 완료됨을 알았다. 형성된 $TaSi_2$층으로 out-diffusion 하였다.

• 한국미생물·생명공학회지
• /
• 제19권3호
• /
• pp.209-214
• /
• 1991

Lactococcus sp. 1112-1 균주가 생산하는 bacteriocin을 정제하고 특성을 조사하였다. CM-sephadex ion exchange column chromatography, Sephadex G-50 gel filtration, SDS-PAGE를 행함으로서 수율 16.2 정제도 123배의 단일물질을 얻었다. 이 물질은 열에 비교적 안정하여 $60^{\circ}C$에서 60분간 열처리 할 때 38의 잔존활성을 유지하였으며 알카리쪽에서는 비교적 불안정하여 pH 8.0에서 48시간 처리시 77의 활성을 소실하였다. 이 물질은 26개의 아미노산 잔기를 이루고 있었다.

• 한국임상수의학회지
• /
• 제38권4호
• /
• pp.199-203
• /
• 2021

A 4-year-old Thoroughbred mare was brought to the Korea Racing Authority Equine Hospital with heightened sensitivity to touch of the hindquarter, reluctance to step forward, frequent urination even during training, clitoral winking, tail swinging, tail lifting, and training difficulties due to being in constant heat. The trainer claimed that she was in heat and exhibited reduced performance. Physical and lameness examinations revealed no abnormality. Rectal palpation and transrectal ultrasonography revealed normal reproductive organs and estrus. As she exhibited typical estrous behavior without any other physical conditions, the mare was considered to express undesirable estrous behavior. An intrauterine glass ball was inserted into the mare on ovulation day. However, the estrous behaviors were reduced unsatisfactorily. Additionally, 1 mL of peanut oil was administered on the 10th day after the intrauterine device insertion. The mare returned to training and expressed no undesirable estrous behavior over 30 days after the peanut oil treatment. However, further follow-ups were not conduct as the mare was retired to a farm after a limb injury occurred during training. This is the first report of undesirable estrous behavior in a Thoroughbred mare under the rules of racing in Korea. It is recommended that equine clinicians in Korea consider peanut oil as a therapeutic agent to control mares' estrous behavior-related problems.

• 한국의류산업학회지
• /
• 제13권6호
• /
• pp.972-982
• /
• 2011

The purpose of this study is to improve the method of color developing with alkali solution as a promotor of color developing for feasible use. Cotton fabric was dyed with persimmon extract ranged with 0~3% alkali component with 5 types of strong to mild alkali solution. Heat treatment for color developing was applied to fabric dyed with persimmon extract and alkali mixing solution. Tests were carried out to analyze the change of surface color, ${\Delta},Ea^*b^*$, and water repellent of the dyed cotton fabric. The alkali mixing sample showed higher ${\Delta},Ea^*b^*$ value than control one without alkali mixing on the base of dyed fabric due to high color developing by alkali in the initial step of dyeing process. As alkali concentration increased, deeper dark color appeared on the fabric. The fabric color was changed to more dark in the application of sodium hydroxide, sodium carbonate, potassium carbonate in the initial step of dyeing process but color was not changed by increased heating time. However, the fabric showed a slight dark color with sodium acetate and more color change than that of the fabric dyed with persimmon extract without alkali. Therefore, sodium acetate seemed to a suitable promotor for color developing in persimmon extract dyeing. Property of water repellent was showed after color developing by heating with low concentration of alkali treatment.

• 한국재료학회지
• /
• 제23권10호
• /
• pp.543-549
• /
• 2013

The purpose of this paper was to investigate the effect of a high-energy milling (HEM) process on the particle morphology and the correlation between a thermal treatment and tetragonal/monoclinic nanostructured zirconia powders obtained by a precipitation process. To eliminate chloride residue ions from hydrous zirconia, a modified washing method was used. It was found that the used washing method was effective in removing the chloride from the precipitated gel. In order to investigate the effect of a pre-milling process on the particle morphology of the precipitate, dried $Zr(OH)_4$ was milled using a HEM machine with distilled water. The particle size of the $Zr(OH)_4$ powder exposed to HEM reduced to 100~150 nm, whereas that of fresh $Zr(OH)_4$ powder without a pre-milling process had a large and irregular size of 100 nm~1.5 ${\mu}m$. Additionally, modified heat treatment process was proposed to achieve nano-sized zirconia having a pure monoclinic phase. It was evident that two-step calcining process was effective in perfectly eliminating the tetragonal phase, having a small average particle of ~100 nm with good uniformity compared to the sample calcined by a single-step process, showing a large average particle size of ~300 nm with an irregular particle shape and a broad particle size distribution. The modified method is considered to be a promising process for nano-sized zirconia having a fully monoclinic phase.

• 전자공학회논문지A
• /
• 제29A권8호
• /
• pp.49-55
• /
• 1992

We Have investigated the properties of the titanium nitrite films widely used in VLSI devices as diffusion barrier in Al-based metallization. TiN films were formed by reactive sputtering from Ti target in Ar-N$_2$ mixtures, varying deposition parameters such as N$_2$ partial pressure, substrate temperature, power, and total pressure. All the samples received the heat treatment at 45$0^{\circ}C$ for 30 min. The resulting films are characterized by mechanical stylus($\alpha$-step), x-ray diffraction(XRD), scanning electron microscopy(SEM), and four point probe method. The Tin film properties strongly depend on the deposition condition. The stoichiometry and Ti deposition rate are critically affected by nitrogen partial pressure, and the resistivity, in particular, is dependent on both the substrate temperature and sputtering power.

• 대한기계학회논문집B
• /
• 제27권5호
• /
• pp.620-627
• /
• 2003

Radiative heat transfer in an axisymmetric enclosure with absorbing, emitting, and scattering medium is studied here by using the different methods such as MDOM, FVM, and FVM2 with emphasis on the treatment of angular derivative term, which appears in a curvilinear coordinates due to angular redistribution. After final discretization equation for FVM2 is introduced by using the step scheme and directional weights, present approach is validated by applying it to three different benchmarking problems with absorbing, emitting, and scattering medium.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.921-926
• /
• 1997

SOI(Silicon On lnsulator) technology is many advantages in the gabrication of MOS(Metal-Oxide Semiconductor) and CMOS(Complementary MOS) structures. These include high speed, lower dynamic power consumption,greater packing density, increased radiation tolearence et al. In smiple form of bonded SOL wafer manufacturing, creation of a bonded SOI structure involves oxidizing at least one of the mirror polished silicon surfaces, cleaning the oxidized surface and the surface of the layer to which it will be bonded,bringing the two cleanded surfaces together in close physical proximity, allowing the subsequent room temperature bonding to proceed to completion, and than following this room temperature joining with some form of heat treatment step,and device wafer is thinned to the target thickness. This paper has been performed to investigate the possibility of the bonded SOI wafer manufacturing Especially, we focused on the bonding quality and thinning method. Finally,we achieved the bonded SOI wafer that Si layer thickness is below 3 .mu. m and average roughness is below 5.angs.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.188-197
• /
• 1999

Grain refinement of the structural steels was selected as the most effective method to meet improvement of strength and toughness without heat treatment. So, the future research and developing direction of ultra fine grain steels are more and more required to response to the production of eco - materials(environmental consciousness - materials) In this paper, the product of surface fine grain steels by CRCT and Inverse Transformation Method by warm deformation of martensite is carried out in order to improve the production process of Dowel Bar. It is possible to obtain surface ultra fine grain steel, when warm deformation of martensite formed after quenching is carried out from 730$^{\circ}C$ to 800$^{\circ}C$ in the finishing rolling step. The characters of surface with ultra fine grain steel is showing the cementite particles inside the ferrite grain and fine ferrite grain of about 1.2$\mu\textrm{m}$ in size.