• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.819-826
• /
• 2004

A multi-step optimum strategy for the selection of the locations and directions of strain gauges is proposed in this paper to capture at best the modal response of blade in a series of modes on fan blades. It is consist of three steps including two pass reduction step, genetic algorithm and fine optimization to find the locations-directions of strain gauges. The optimization is based upon the maximum signal-to-noise ratio(SNR) of measured strain values with respect to the inherent system measurement noise, the mispositioning of the gauge in location and gauge failure. Optimal gauge positions for a fan blade is analyzed to prove the effectiveness of the multi-step optimum methodology and to investigate the effects of the considering parameters such as the mispositioning level, the probability of gauge failure, and the number of gauges on the optimal strain gauge position.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.557-563
• /
• 2009

The research develops measurement processes for estimating and evaluating the gauge R&R(Reproducibility & Repeatability) using ANOVA(Analysis of Variance) of experimental design tools. The ten-step processes developed include experimental goal setting, the selection of characteristics(factors, levels), data model, ANOVA, EMS(Expected Mean Square), estimation of gauge precisions, and evaluation indexes. The three-factor combined measurement models are presented to show the processes developed in this paper.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.379-401
• /
• 1991

A comprehensive computer software has been implemented in conjunction with the software for volumetric error generator, to assess simulation on specific measurement tasks. The simulation algorithms have been developed for major measurement tasks, such as step gauge, ring gauge, sphere gauge, and cylinder gauge simulations etc. Verification and practical applications of the developed module have shown its efficiency and validity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.312-318
• /
• 1993

This paper presents an useful technique for error assessment of CMM with simple gauges such as step gauge. A computer module for measurement path generation is implemented,where the appropriate measurement sequences are generated in terms of DMIS file format for CMMs of CNC mode. After the CNC codes are downloaded into CMMs, the measurement operations are performed, and the error analysis are followed. Positional errors, angular errors are successfully measured with high precision along the 3 axis in relatively short time. The squareness error is also assessed with the step gauge measurement data. The developed system has been practically applied, and showed good performance.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.757-766
• /
• 2004

This paper focuses on the formulation and validation of an automatic strategy to select the optimal location and direction of strain gauges for the measurement of the modal response. These locations and directions are important to render the strain measurements as robust as possible when a random mispositioning of the gauges and gauge failures are expected. The approach relies on the evaluation of the signal-to-noise ratios of the gauge measurements from strain data of finite element. The multi-step optimization strategy including genetic algorithm is used to find the strain gauge locations-directions that maximize the smallest modal strain signal-to-noise ratio in the absence of gauge failure or its expected value when gauge failure is possible. A flat Plate is used to prove the applicability of the proposed methodology and to demonstrate the effects of the essential parameters of the problem such as the mispositioning level, the probability of gauge failure, and the number of gauges.

• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.560-567
• /
• 2006

The exact load measurements for the mechanical parts of a wind turbine are important step both fur the evaluation of a specific wind turbine design and for a certification process. A common method for a mechanical load measurement is using a strain gauge sensing. Two main problems ought to be answered in order for this method to be applied to the wind turbine project. These are strain gauge calibration and non-contact signal transmission from the strain gauge output to a load monitoring system. This paper suggests reliable solutions fer these two problems. A Bluetooth, a short range wireless data communication technology, is used to solve the second problem. The first one, the strain gauge calibration methodology for a load measurement in a wind turbine application, is fully explained in this paper. Various mechanical loadings for a strain gauge calibration in a wind turbine load measurement are introduced and analyzed. Initial experimental results which are obtained from a 1 kW small size wind turbine are analyzed, and the uncertainty problem in estimating mechanical loads using a calibration matrix is fully covered in this paper.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.41-50
• /
• 2000

NC(Numerical Control)는 1949년 미 공군이 Parson (Fig. 1 (a))이라는 사람에게 프로펠러 (Propeller)용 블레이드(Blade)의 윤곽을 검사하기 위한 판 게이지(Gauge)(Fig. 1 b)) 개발을 의뢰한 것이 계기가 되어 발명되었다. 이후, 신시나티 미라크론(Cincinati Miracle)이라는 공작기계 업체가 NC 사업에 참여하게 되고, 1952년 최초로 MIT(Massachusetts Institute of Technology)의 서보기구연구소(Servo-mechanism laboratory)에 의해 NC 공작기계가 탄생(Fig. 1 (c)) 되었다.(중략)

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2323-2333
• /
• 2021

The paper proposes a technique for reconstructing the true hardening curve of isotropic materials from ring tensile tests. Neutron irradiated 42XNM alloy tensile properties were investigated. The calculation of the true hardening curve for tensile and compression tests of standard cylindrical samples was performed at the first step. After that, the FEM-model was developed and validated using the ring tension and compression tests (with the hardening curve defined in step 1). Finally, the true hardening curve was calculated by selecting the FEM-model parameters and its validation by ring sample tests in different states using an iterative method. For these samples, experimental and calculated gauge length values were obtained, and the corresponding material's constants were estimated.

• 대한수학회보
• /
• 제61권1호
• /
• pp.93-115
• /
• 2024

In this paper, the Gauge-Uzawa methods for the Darcy-Brinkman equations driven by temperature and salt concentration (DBTC) are proposed. The first order backward difference formula is adopted to approximate the time derivative term, and the linear term is treated implicitly, the nonlinear terms are treated semi-implicit. In each time step, the coupling elliptic problems of velocity, temperature and salt concentration are solved, and then the pressure is solved. The unconditional stability and error estimations of the first order semi-discrete scheme are derived, at the same time, the unconditional stability of the first order fully discrete scheme is obtained. Some numerical experiments verify the theoretical prediction and show the effectiveness of the proposed methods.

• 한국습지학회지
• /
• 제16권1호
• /
• pp.113-124
• /
• 2014

강우량은 관측소의 설치고도에 따라 관측량의 편차가 심하며, 이로 인해 도시지역과 산지지역의 강우발생 특성이 다르다. 산지효과로 인해 고도가 높아질수록 강우 관측시 불확실성이 커지는 것을 감안하면 산지지역에서의 강우관측소 밀도는 커야한다. 이러한 관측소의 고도특성이 반영된 관측망 평가는 산지효과를 반영하기 위한 것으로 산악지역에서 발생하는 돌발홍수의 효과적인 예측 및 레이더 자료의 보정에 있어 중요한 과정이 된다. 이에 본 연구에서는 강우관측소의 설치고 도를 고려한 강우관측망의 평가방법론을 제안하였다. 강우관측소의 고도별 설치밀도 파악을 위해 고정간격의 고도를 이용하는 등고도비별 설치밀도 산정방법과 유역의 면적비를 이용하는 등면적비별 설치밀도 산정방법을 적용하였다. 그 결과 등면적비를 이용하는 경우가 고도별 강우관측망의 평가에 보다 유리함을 확인하였다. 아울러 타유역과의 비교를 위해 등면적별 관측소 설치밀도의 변동계수를 이용하여 고도별 분포를 정량화 하였다. 이는 강우관측소의 설치고도분포의 균등함을 평가하는 정량적 지표가 되며, 제시된 방법론을 5대강 유역에 적용하였다. 그 결과, 설치밀도의 변동계수가 작은 유역에서는 고도별 강우설치밀도가 일정함으로 인해 보다 균등한 분포를, 반면 변동계수가 큰 유역에서는 상대적으로 고도별 설치밀도가 불균등함을 확인하였다.