• 대한영양사협회학술지
• /
• 제27권1호
• /
• pp.45-58
• /
• 2021

This study evaluated the sanitation management standards for vegetable preparation processes without a cooking stage. The aerobic plate counts (APC), coliform counts, and Escherichia coli of the samples at each production step were analyzed, and microbial growth of the samples stored at different temperatures was measured. The validation was judged in accordance with the microbial criteria stipulated by the British PHLS. After washing and disinfection, the APCs of the two samples decreased to 3~4 log CFU/g in both seasons. Compared to the purchasing stage, the decrease in coliform counts was approximately 0~3 log CFU/g in both seasons; E. coli was not detected. The initial APC and coliform levels of two vegetable samples were 4~5 log CFU/g in both seasons, with an increase of 1 log CFU/g taking more than 6 h at 25℃ and 2 h at 35℃. More than 10 h at 25℃ and 6 h at 35℃ were required to increase the E. coli O157:H7 count by 1~2 log CFU/g for two seasoned samples. In conclusion, washing and disinfection effects and changes in microbial growth during room temperature storage were similar in the two vegetables. Despite the low sanitizing effect of the two vegetables, when cut vegetables were stored under the critical limit within 2 h at two different room temperatures, seasoned lettuce and chicory were at the 'satisfactory' or 'acceptable' levels of PHLS regardless of the storage temperatures. The validation of sanitation management standards applied to vegetable preparation with the no-cook step was approved.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제23권3호
• /
• pp.148-155
• /
• 2017

본 논문에서는 스마트폰 내 가속도, 자기장, 자이로스코프 센서들을 이용해 사용자의 걸음과 걸음 수를 인식하는 시스템을 개발하였다. 센서 데이터 분석을 통해 사용자의 걸음을 스마트폰을 손에 든 상황과 주머니에 넣은 상황에서의 걸음 패턴으로 분류하고 이를 추출할 수 있는 알고리즘을 사용하여 걸음 수 인식의 정확성을 개선하였다. 알고리즘을 적용한 결과 손에든 상황에서 96%, 주머니에 넣은 상황에서 95.5% 수준의 걸음 수 인식 정확도를 보였으며, 나머지 터치 스크린, 위아래 반복 흔들기, 앉아서 일어서기, 오른쪽 왼쪽 흔들기와 같은 행위로 인해 발생하는 6%의 오차를 확인하였다.

• 한국정보처리학회논문지
• /
• 제2권2호
• /
• pp.264-276
• /
• 1995

본 논문에서는 수퍼스칼라 프로세서를 위한 컴파일러에서 조건부 분기 명령을 제 거하는 최적화 기법을 제시하였다. 분기를 제거하는 단계적 방법으로 먼저 대수적 규 칙을 사용하여 분기를 산술식의 형태로 변형하고, 그 식에 대응하는 명령 수순을 Granlund/Kenner의 GSO를 사용하여 완전 탐색한 후 목적 프로세서에서 실행시 최소의 동적 계수를 갖는 명령 수순을 선택하였다. 제안한 분기 최적화 기법을 SuperSPARC 프로세서와 GNU C 컴파일러를 사용하여 실험한 결과 입력 프로그램에서 최적화 패턴 과 대응하는 조건부 분기의 경우 원래의 컴파일러가 생성하는 최적 코드 수순에 비하 여 25% 이상의 추가적인 수행시간 개선 효과를 얻을 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.362-367
• /
• 2008

In the present work, we address electric fatigue behavior in bending piezoelectric actuators using an acoustic emission technique. Electric cyclic fatigue tests have been performed up to ten million cycles on the fabricated specimens. To confirm the fatigue damage onset and its pathway, the source location and distributions of the AE behavior in terms of count rate are analyzed over the fatigue range. It is concluded that electric cyclic loading leads to fatigue damages such as transgranular damages and intergranular cracking in the surface of the PZT ceramic layer, and intergranular cracking even develops into the PZT inner layer, thereby degrading the displacement performance. The electric-induced fatigue behavior seems to show not a continuous process but a step-by-step process because of the brittleness of PZT ceramic. Nevertheless, this fatigue damage and cracking do not cause the final failure of the bending piezoelectric actuator loaded up to 107 cycles. Investigations of the AE behavior and the linear AE source location reveal that the onset time of the fatigue damage varies considerably depending on the existence of a glass-epoxy protecting layer.

• Journal of Radiation Protection and Research
• /
• 제42권3호
• /
• pp.158-165
• /
• 2017

Background: Nuclear facilities in South Korea have generally adopted pressurized ion chambers to measure ambient gamma ray exposure rates for monitoring the impact of radiation on the surrounding environment. The rates assessed with pressurized ion chambers do not distinguish between natural and man-made radiation, so a further step is needed to identify the cause of abnormal variation. In contrast, using NaI(Tl) scintillation detectors to detect gamma energy rates can allow an immediate assessment of the cause of variation through an analysis of the energy spectra. Against this backdrop, this study was conducted to propose a more effective way to monitor ambient gamma exposure rates. Materials and Methods: The following methods were used to analyze gamma energy spectra measured from January to November 2016 with NaI detectors installed at the Korea Atomic Energy Research Institute (KAERI) dormitory and Hanbat University. 1) Correlations of the variation of rates measured at the two locations were determined. 2) The dates, intervals, duration, and weather conditions were identified when rates increased by $5nSv{\cdot}h^{-1}$ or more. 3) Differences in the NaI spectra on normal days and days where rates spiked by $5nSv{\cdot}h^{-1}$ or more were studied. 4) An algorithm was derived for automatically calculating the net variation of the rates. Results and Discussion: The rates measured at KAERI and Hanbat University, located 12 kilometers apart, did not show a strong correlation (coefficient of determination = 0.577). Time gaps between spikes in the rates and rainfall were factors that affected the correlation. The weather conditions on days where rates went up by $5nSv{\cdot}h^{-1}$ or more featured rainfall, snowfall, or overcast, as well as an increase in peaks of the gamma rays emitted from the radon decay products of $^{214}Pb$ and $^{214}Bi$ in the spectrum. This study assumed that $^{214}Pb$ and $^{214}Bi$ exist at a radioactive equilibrium, since both have relatively short half-lives of under 30 minutes. Provided that this assumption is true and that the gamma peaks of the 352 keV and 1,764 keV gamma rays emitted from the radionuclides have proportional count rates, no man-made radiation should be present between the two energy levels. This study proved that this assumption was true by demonstrating a linear correlation between the count rates of these two gamma peaks. In conclusion, if the count rates of these two peaks detected in the gamma energy spectrum at a certain time maintain the ratio measured at a normal time, such variation can be confirmed to be caused by natural radiation. Conclusion: This study confirmed that both $^{214}Pb$ and $^{214}Bi$ have relatively short half-lives of under 30 minutes, thereby existing in a radioactive equilibrium in the atmosphere. If the gamma peaks of the 352 keV and 1,764 keV gamma rays emitted from these radionuclides have proportional count rates, no man-made radiation should exist between the two energy levels.

• 한국인터넷방송통신학회논문지
• /
• 제18권3호
• /
• pp.119-125
• /
• 2018

스마트폰을 이용한 실내에서의 위치 기술이 다양하게 연구되고 있다. 그 중 스마트폰에 내장된 가속도 센서와 자이로 센서를 이용한 위치 추적 기술은 WiFi fingerprint 기술 등과 함께 연동되어 많이 사용되고 있다. 센서를 이용한 위치 추적 기술은 오래 전부터 사용되어 왔으나, 스마트폰의 경우 센서의 성능이 좋지 않고 사용자가 스마트폰을 일정한 자세로 들고 이동하는 등 사용 환경이 특이하다. 따라서 스마트폰 환경에서 위치 추적의 정확도를 높이기 위해서는 고유의 환경에서 적절한 알고리즘을 연구 개발해야 한다. 본 논문에서는 사용자의 이동 걸음 수 검출 알고리즘인 주파수 분석 방식, 최대 최소 가속도의 합 방식 및 적응형 임계값 방식에 대한 다양한 실험 환경에서의 성능을 분석하고, 가장 정확한 방식을 선정한다.

• Journal of Microbiology
• /
• 제41권3호
• /
• pp.262-265
• /
• 2003

Although enumerating bacterial cells is a fundamental step in understanding microbial ecosystems in marine environments, substantial decrease in bacterial counts with increasing sample storage time hampers the accurate estimation of bacterial biomass. We compared the variations in bacterial cell numbers caused by freezing and thawing of sample bottles or slides. Bacterial counts of seawater samples frozen only once in a sampling bottle yielded approximately 95％ of the original numbers after 90 days, whereas 80％ of the original count was obtained for samples prepared on slides. Only 67％ and 58％ of the original counts were recovered in samples repeatedly frozen and thawed in bottles or on slides, respectively. The results indicated that freezing a seawater sample in a bottle increased the consistency of the epifluorescence microscopic enumeration of bacterial cells.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.810-813
• /
• 2004

Air void systems in hardened concrete has an important influence on concrete durability such as freeze-thaw resistance, water permeability, surface scaling resistance, and etc. Linear traverse method and point count method described at ASTM have been widely used to estimate the air void system in hardened concrete. These methods, however, are rarely used at present, because they require many efforts, are time consuming works, depend on each person's decision, and are not repeatable. Thus, new image analysis method using microscope and computer processes has been approached for analyzing air void system in hardened concrete. However, it is just in initial step. The purposes of this study were to develope an effective and reliable image analysis technique for estimating air void system in hardened concrete. The developed technique was proved to be accurate, reasonable and repeatable.

• 한국분말재료학회지
• /
• 제22권5호
• /
• pp.337-343
• /
• 2015

Powder compaction is a continually and rapidly evolving technology where it is a highly developed method of manufacturing reliable components. To understand existing mechanisms for compaction, parameter investigation is required. Experimental investigations on powder compaction process, followed by numerical modeling of compaction are presented in this paper. The experimental work explores compression characteristics of soft and hard ductile powder materials. In order to account for deformation, fracture and movement of the particles, a discrete-finite element analysis model is defined to reflect the experimental data and to enable investigations on mechanisms present at the particle level. Effects of important simulation factors and process parameters, such as particle count, time step, particle discretization, and particle size on the powder compaction procedure have been explored.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제27권4호
• /
• pp.393-401
• /
• 2000

본 논문은 주어진 고장 데이타로부터 소프트웨어의 신뢰성 예측력 향상을 위해 뉴로-퍼지 시스템 연구를 수행하였다. 다른 소프트웨어로부터 수집된 10개의 고장 수 데이타와 4개의 고장시간 데이타에 대해 규칙의 수를 변경시키면서 다음 단계 예측을 실험하였다. 뉴로-퍼지 시스템의 예측력을 보이기 위해 다음 단계 예측에 대해 비교하였다. 실험 결과 뉴로-퍼지 시스템은 다양한 소프트웨어에 잘 적용되었다. 또한 널리 사용되고 있는 신경망과 통계적 소프트웨어 신뢰성 성장 모델의 예측력과 견줄 정도의 좋은 결과를 얻었다.