• Korean Journal of Materials Research
• /
• v.12 no.4
• /
• pp.279-282
• /
• 2002

The effect of field annealing on the velocity changes of magneto surface acoustic wave (MSAW) devices has been investigated for deposited $(Fe_{1-x}Co_x)_{89}Zr_{11}$ (x = 0~1.0) amorphous films. By means of two step field annealing at $195^{\circ}C$ for 10 minute in the magnetic field of 130 Oe, the MSAW device with x=0.4 film among the devices showed the superior velocity change of 0.1 %. This gigantic value was obtained in the DC bias field of 40 Oe at the exciting frequency of 8.7 MHz. It was confirmed that such behavior was due to the variation of differential permeability caused by an optimal stress within the magnetic film.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.92-97
• /
• 2009

In this paper, a conventional simulated annealing (SA) method for optimization of a kinoform computer generated hologram (CGH) is analyzed and the SA method is modified to reduce a reconstruction error rate (ER) of the CGH. The dependences of the quantization level of the hologram pattern and the size of the data on the ER are analyzed. To overcome saturation of the ER, the conventional SA method is modified as it magnifies a Fourier-transformed pattern in the intermediate step. The proposed method can achieve a small ER less than 1%, which is impossible in the conventional SA method.

• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.381-389
• /
• 1989

Effects of annealing temperature, time, and atmospehre on the flow characteristics of Atmospheric Pressure Chemical Vapor Deposition-borophosphosilicate glass were investigated. Stable step coverage can be obtained by annealing the BPSG film at 90$0^{\circ}C$ for 30 minutes in N2 atmosphere, but further heat treatment isnot effective. Flow characteristics of the BPSG film was better in steam atmosphere than in N2 atmosphere, and the factors which cause it were analyzed. The concentration of boron in the BPSG film was measured pretty accurately by FTIR spectrum. Boron content in the BPSG film was reduced by annealing treatment. The decrement of boron was greater in steam atmosphere than in the N2 atmosphere. Also it was found from the FTIR spectroscopic analysis that PH3 inhibited the oxidation of B2H6.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.42-48
• /
• 2002

Placement is an important step in the physical design of VLSI circuits. It is the problem of placing a set of circuit modules on a chip to optimize the circuit performance. The most popular algorithms for placement include the cluster growth, simulated annealing and integer linear programming. In this paper we propose a genetic algorithm searching solution space for the placement problem, and then compare it with simulated annealing by analyzing the results of each implementation.

• The Korean Journal of Rheology
• /
• v.10 no.2
• /
• pp.113-120
• /
• 1998

사출성형공정은 대표적인 고분자 가공공정으로 그 복잡한 특성으로 인하여 공정변 수를 최적화하는 것을 주로 경험에 의존해 왔다. 본 연구에서는 사출성형공정의 보압과정 중에 보압의 이력을 최적화하여 제품각 부분의 부피수축율차이를 최소가 되게 하는 최적화 시스템을 개발하였다. 최적화 알고리즘으로는 GA방법을 사용하였으며 본 연구에서 제안한 최적화 시스템으로 보압과정의 최적화를 수행한 결과 부피수축율의 차이가 현저히 감소하는 것을 알수 있었다. 특히 SA방법을 사용하는 경우 초기의 최적화 속도가 GA를 사용하는 경 우에 비해서 뛰어남을 알수 있었다. 또한 충전과정과 보압과정을 함께 최적화하여 보압과정 만 최적화한 결과와 비교하여 보았다.

• Progress in Superconductivity
• /
• v.5 no.2
• /
• pp.124-127
• /
• 2004

Many of research efforts have been focused on the improvement of critical current density (Jc) of silver-sheathed Bi-2223 tapes far practical applications. In this study, the transformation of Bi-2212 phase was investigated, which was transformed to orthorhombic from tetragonal through pre-annealing during powder packing and drawing process. The relationship between hardness of Bi-2212 orthorhombic phase and workability of Bi-2223/Ag tape was investigated. Bi-2223 superconducting wires with 55 filaments were fabricated by stacking and drawing process with different heat-treatment histories. Before rolling process, round wires were pre-annealing at 76$0^{\circ}C$ and in a low oxygen partial pressure. We confirmed that pre-annealing step was to transform to Bi-2212 orthorhombic structure from Bi-2212 tetragonal structure and to reduce the formation of second phases. However the breakages were created at Ag-alloy clad during rolling for pre-annealed Bi-22231Ag tapes. Several pre-annealing scenarios were introduced to reduce the breakages during rolling process. Microstructure and critical current density of pre-annealed Bi-2223 superconducting tapes were investigated. We could achieve proper pre-annealing conditions for Ag-alloy clad Bi-2223 superconducting tapes.

• Progress in Superconductivity
• /
• v.4 no.2
• /
• pp.176-179
• /
• 2003

A lot of efforts have been focused on the optimization of PIT parameters for Bi-2223/Ag wire. Bi-2223 superconducting wires with 55 filaments were fabricated by stacking, drawing process. Before rolling process, round wires were pre -annealed at 760 - 820 $^{\circ}C$ and low oxygen partial pressure. We confirmed that pre-annealing step was to transform Bi-2212 orthorhombic structure from Bi-2212 tetragonal structure and to reduce the formation of second phases. However Bi-2223 phases also were formed at higher than 76$0^{\circ}C$ of pre-annealing temperature. The engineering critical current densities (Je) of Bi-22231Ag tapes were sintered at low oxygen partial pressure were higher than t hat of the wires sintered at air. We could achieve 6500 A/${cm}^2$ of Je for the tape that was initially kept at slightly higher temperature than that of normal heat treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.30-33
• /
• 2004

Shallow p+-n junctions were formed by low-energy ion implantation and dual-step annealing processes The dopant implantation was performed into the crystalline substrates using $BF_2$ ions. The annealing was performed with a rapid thermal processor and a furnace. FA+RTA annealing sequence exhibited better junction characteristics than RTA+FA thermal cycle from the viewpoint of junction depth. A new simulator is designed to model boron diffusion in silicon, which is especially useful for analyzing the annealing process subsequent to ion implantation. The model which is used in this simulator takes into account nonequilibrium diffusion, reactions of point defects, and defect-dopant pairs considering their charge states, and the dopant inactivation by introducing a boron clustering reaction. Using a resonable parameter values, the simulator covers not only the equilibrium diffusion conditions but also the nonequilibrium post-implantation diffusion. Using initial conditions and boundary conditions, coupled diffusion equation is solved successfully. The simulator reproduced experimental data successfully.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.3
• /
• pp.207-212
• /
• 2007

The concentration profiles of deep energy levels($E_c$ -0.23e V, $E_v$+0.36e V and $E_c$ -0.23e V) in platinum-diffused silicon have generally a sharp gradient in the vicinity of the surface of the silicon wafer. In this work two efficient methods are proposed to obtain the uniform concentration profiles throughout the silicon wafer. One is that the platinum diffusion is carried out at $1000^{\circ}C$ for 1h in oxygen atmosphere. In this case the values of obtained uniform concentration, $1{\times}10^{15}cm^{-3}$ for the $E_c$ -0.23e V level, and 1{\times}10^{14}cm^{-3}$ for the $E_c$ -0.52e V level, are very restricted, respectively. The other is two-step annealing process. The platinum diffusion is carried out at $850{\sim}1100^{\circ}C$ in a nitrogen ambient for 1h and then the annealing is performed at $1000^{\circ}C$ in oxygen ambient after removing platinum-source from the platinum diffused samples. The advantage of this method is that the uniform concentration of these levels required power devices can be controlled by setting the desired temperatures when the platinum diffusion is carried out in nitrogen ambient.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.2
• /
• pp.14-17
• /
• 2016

Annealing as-grown electron-doped cuprates under a low oxygen-partial-pressure condition is a necessary step to achieve superconductivity. It has been recently found that the so-called protect annealing results in much better superconducting properties in terms of the superconducting transition temperature and volume fraction. In this article, we report on angle-resolved photoemission spectroscopy studies of a protect-annealed electron-doped cuprate $Pr_{0.9}La_{1.0}Ce_{0.1}CuO_4$ on annealing condition dependent superconducting and pseudo-gap properties. Remarkably, we found that the one showing a better superconducting property possesses almost no pseudo-gap while others have strong pseudo-gap feature due to an anti-ferromagnetic order.