• 제목/요약/키워드: steel-making

검색결과 554건 처리시간 0.029초

자기공명영상에서 자장세기와 시퀀스에 따른 아티팩트 변화 (Metal Artifact Caused by Magnetic Field Strength and Sequence on T1WI-MRI)

  • 고성진
    • 한국콘텐츠학회논문지
    • /
    • 제10권9호
    • /
    • pp.302-308
    • /
    • 2010
  • 자기공명영상에서는 체내 금속물에 의한 강자성 인공물(Ferromagnetic artifact)이 발생하여 많은 영상의 왜곡을 초래 한다. 본 연구는 T1 강조영상의 자장 세기와 시퀀스에 따른 수술시 인체 내에 사용되는 금속물의 왜곡을 분석하여 영상 왜곡을 최소화 할 수 있는 시퀀스와 금속물의 종류를 알아보았다. SIEMENS사의 1.5T와 3.0T를 이용하였고, Ti+Al, Stainless, Nitinol 금속물을 팬텀 내에 각각 위치시켜 시퀀스별 SE(Spin Echo), TSE(Turbo Spin Echo), VIBE, Flash T1 강조영상을 획득하였다. 획득된 영상을 통해서 금속물질 주변에서 발생하는 영상의 왜곡 정도를 비교 및 분석하였다. 실험결과 임상에서 사용되는 모든 금속물에서 강자성 허상이 발생 하였는데, 그 중 TSE 시퀀스와 Nitinol 금속물에서 가장 작은 아티팩트가 발생하였다. TSE 시퀀스와 Nitinol이 사용된 1.5T 영상에서 면적 0.97 cm2, 장축 0.76 cm, 단축0.72 cm로 왜곡 정도가 가장 작게 나타났다. 그러므로 금속을 체내에 삽입한 환자의 검사를 위해서 3.0T 보다 1.5T 자기공명영상 장비를 사용하고, TSE 시퀀스를 사용하는 것이 T1 강조영상을 얻는데 가장 적합하다고 사료된다.

고로 내 미분탄 연소조건에서 탄종에 따른 입자온도와 CO/CO2 배출 특성에 관한 연구 (Experimental Study on Particle Temperature and CO/CO2 Emission Characteristics of Pulverized Coal Combustion Condition According to Coal Types in Blast Furnace)

  • 조영재;김진호;김량균;김규보;전충환
    • 대한기계학회논문집B
    • /
    • 제38권10호
    • /
    • pp.807-815
    • /
    • 2014
  • 본 연구는 최근 대형고로에 도입된 PCI 시스템에서 석탄의 탄종에 따른 연소 특성을 파악하기 위해, 고로내 석탄의 연소환경을 잘 모사할 수 있는 층류반응기(LFR)을 이용하여 화염형상을 분석하고, 체류시간별 입자의 온도와 배기가스인 CO와 $CO_2$를 측정하였다. 화염형상의 가시적인 분석뿐만 아니라, 입자온도와 배기가스의 배출특성을 근거로 하여 휘발분 연소와 촤 연소 구간을 구분하였다. 특히 CO는 고로내 발생하는 산화철의 환원반응에 영향을 주는 인자로써, 본 연구에서는 탄종별 CO의 배출시점과 특성에 대한 분석이 이루어졌다. 휘발분 함량이 많은 탄종의 연소 초기 입자온도는 높게 측정되었지만, 휘발분 연소구간이 길어지면서 이후에 연속적으로 시작되는 촤 연소가 지연되었다. 촤 연소구간에서는 연료비가 높을수록 CO발생량이 상대적으로 많고, 적정온도가 유지되었다.

스테인리스강을 사용한 분말 적층 용융 방식의 금속 3차원 프린터에서 제작된 물체의 최소 선폭 측정 (Measurement of minimum line width of an object fabricated by metal 3D printer using powder bed fusion type with stainless steal powder)

  • 손봉국;정연홍;조재흥
    • 한국산학기술학회논문지
    • /
    • 제19권10호
    • /
    • pp.346-351
    • /
    • 2018
  • 금속 3D 프린팅 기술은 레이저 빔의 초점에 금속분말을 주입하는 방식에 따라 대표적으로 PBF(Powder Bed Fusion)방식과 DED(Direct Energy Deposition)방식으로 나뉜다. DED 방식은 금속 분말 도포와 동시에 레이저를 조사하여 3차원 구조물을 제작하는 금속 3D 프린팅 기술이고, PBF 방식은 일정 높이로 3차원 그래픽을 슬라이싱 한 후 한 층씩 금속 분말을 적층하여 레이저를 이용해 3차원 구조물을 제조하는 방식이다. DED 방식을 사용하면 레이저 클래딩, 금속 용접 등에는 강점을 가지지만 3D 형상을 제작할 경우 밀도가 낮아지는 문제점이 발생한다. DED 방식에서의 구조체 밀도 문제를 해결하기 위해 PBF 방식을 도입하면 상대적으로 밀도가 높은 3차원 구조물을 제작하는데 용이하다. 본 논문에서는 갈바노 스캐너와 광섬유로 전송되는 Nd:YAG 레이저 빔을 이용한 약 $30{\mu}m$ 크기의 스테인리스 강 분말을 이용하는 PBF 방식의 3차원 프린터를 제작하고, 이를 이용하여 얇은 금속 구조물을 제작하였다. 또한 레이저의 조사 횟수, 출력, 초점 크기, 스캐닝 속도에 따른 선폭의 최적조건을 찾았으며, 그 결과 최적 조건은 레이저 조사 횟수 2회, 출력 30 W, 초점 크기 $28.7{\mu}m$, 스캐닝 속도 200 mm/s에서 최소 선폭은 약 $85.3{\mu}m$로 측정되었다.

선체보강판의 모델링범위에 따른 최종강도거동에 관한 연구 (A Study on the Ultimate Strength Behavior according to Modeling Range of the Stiffened Plate)

  • 박주신;고재용;박성현
    • 해양환경안전학회지
    • /
    • 제10권2호
    • /
    • pp.35-39
    • /
    • 2004
  • 선체구조는 기본적으로 판부재의 조합으로 이루어져 있으며, 이러한 판부재는 하중분담 능력에 따라서 전체적인 구조의 강도에 큰 영향을 미치게 된다. 또한 각 구조적인 판부재는 개별적으로 거동하는 것이 아니라 종합적인 구조로서 작용하게 된다. 선박구조물은 강구조물과 해양구조물에서와는 달리 고정도의 부정정 구조물로 구성되어 있으며, 이러한 구조물의 거동을 정확하게 규명하기 위해서는 복잡하게 구성되어 있는 선체판넬 구조를 단순화시켜서 해석에 적용하여야 한다. 본 연구에서는 선체판넬구조의 모델링영역에 따른 최종강도 거동의 차이를 분석하여, 합리적인 모델링영역을 규명하고자 한다. 사용된 해석모델은 실제 상선의 이중저구조에서 사용되는 판넬에서 채택하였으며, 유한요소해석 모델링 시 3가지 서로 다른 해석영역을 지정하여 적용하였다. 본 연구의 목적은 일축압축하중이 작용하는 보강판넬구조에서 서로 다른 모델링영역을 갖는 보강판에서의 최종강도 거동을 분석하여 최적의 해석모델링 영역을 찾는 것이다.

  • PDF

급결제에 따른 숏크리트의 응결, 강도 및 리바운드율 (Setting Time, Strength and Rebound Rate of Shotcrete according In Accelerators)

  • 이성행;김용하;함형길;김관진
    • 콘크리트학회논문집
    • /
    • 제17권3호
    • /
    • pp.427-434
    • /
    • 2005
  • 본 연구에서는 실리케이트계 급결제, 알루미네이트계 급결제, 시멘트 광물계 급결제를 사용하여 모르타르의 응결시간과 압축 강도를 실내시험하고, 현장에서 제작된 공시체로 숏크리트의 압축강도, 휨 강도, 휨 인성 및 리바운드율 시험을 시행하여, 급결제가 숏크리트에 미치는 응결, 강도, 시공성을 비교 검토하고, 특히 시멘트광물계 급결제의 성능을 평가하였다 급결제 종류별로 비교한 압축강도의 값은 각 재령별로 숏크리트의 강도 기준에는 적합하였으나 재령 28일의 강도비 $75\%$ 이상의 규정에는 시멘트광물계만이 $87\%$로 규격에 적합하였다. 휨강도시험 결과는 강섬유 숏크리트에 대한 기준에 시멘트광물계는 모든 적합하였으나 알루미네이트계는 재령 28일에서만 기준치에 적합하였으며, 실리케이트계는 모든 기준에 미흡하였으며, 휨 인성 실험결과 한국도로공사 기준에 시멘트광물계와 알루미네이트계는 규정값에 적합하였으나, 실리케이트계는 이기준에 미흡하였다 리바운드율 시험결과는 대체로 $11{\~}19\%$사이였으며, 시멘트광물계 급결제를 사용한 쪽이 알루미네이트계와 실리케이트계 급결제를 사용한 것보다 $2{\~}3\%$ 정도 작게 나타났다. 시멘트광물계 급결제는 초기의 높은 강도와 함께 종래의 급결제가 가지는 장기강도 저감을 극복하고 고강도화 됨으로써 고성능 숏크리트의 품질확보 가능성을 확인할 수 있었다.

정보시스템 구축시 컴퓨터 하드웨어의 선정전략 - T 철강회사의 시스템 선정 사례 - (A computer Hardware Selection Strategy for Information Systems Development : A Case of T Coil Service Center)

  • 유상진;장영택
    • Asia pacific journal of information systems
    • /
    • 제3권2호
    • /
    • pp.3-54
    • /
    • 1993
  • Recently, executives learned of the strategic impact that information systems (IS) and information technology (IT) could provide to their organizations. In other words, through IS/IT companies could squelch competition, secure suppliers, obtain customer loyalty, reduce the threat of new entrants, and identify new opportunities. Because of these potential benefits, organizations are investing ever-increasing amount of organizational resources in IS/IT to make their organizations as information-based ones. Information-based organizations depend largely upon computer hardwares and softwares for their ongoing operations and management. Thus, organizations must manage their information resources, especially hardwares and softwares very effectively to remain competitive. Information resource management (IRI) is a program of activities directed at making effective use of information technology within an organization. These activities cover from corporate IS/IT planning to application system development, implementation, and maintenance. In more detail, IRV activities include planning for and acquiring computer hardwares and communication equipments, planning for, selection, and management of software development projects, and re-engineering business processes as IS/IT are integrated into organizational management. Among these activities, planning for and acquisition of computer hardwares, and planning for and management of software projects are the most critical ones since these activities require enormous amount of such important corporate resources as money, people, and time. Furthermore, corporate's eventual success largely depends upon whether corporate's policy on IS/IT is effective one or not. Numerous approaches and concepts to specific IRM activities have been proposed. However, many organizations have experienced various problems in the process of applying these approaches to their IRM activities mainly because existing methodologies and guidelines are too general to adapt to each firm's unigue situation. Also, these approaches are having its own strengths and weaknesses. Thus, people in charge of organization's IRM policy should come up with effective guidelines to maintain his position very long. In this study, we reviewed some existing approaches for planning, evaluation, and acquisition of computer hardware. Then, real experiences from Taechang Steel Co., Ltd. located in Taegu, which is one of the largest Coil Service Centers in Korea, are discussed. The major purposes of the study are : (1) to discuss the tradeoffs of existing approaches on hardware evaluation and acquisition, (2) to provide a real experience of a company to facilitate the application of theoretical concepts to the real environment.

  • PDF

근대건축 등록문화재의 보존 방안에 관한 연구 (A Study on the Preservation Method of Modern Registered Architectural Cultural Properties)

  • 신웅주;이상선
    • 한국농촌건축학회논문집
    • /
    • 제16권1호
    • /
    • pp.119-127
    • /
    • 2014
  • This study suggests institutional and methodological approaches for preservation of South Korea's registered cultural properties of modern architecture. The suggested approaches are as follows. First, in order to improve the current registration and preservation system for cultural properties, we need to employ both structure-based classification and style-based classification. Registration criteria for modern architecture properties need to include more detailed classification in terms of their structure: brick structure, steel concrete structure and post lintel structure. In terms of construction style, the properties need to be further classified into the western style, the traditional style and the Korean-western eclectic style. In addition, protection of registered cultural properties need to be achieved through legislation of a protection system. Second, while the current system sets out six methods for preservation of registered cultural properties of modern architecture, more specific preservation methods types and plans need to be continuously introduced. In particular, as for the method of partial preservation, the method needs to be further classified based on the usage of the relevant structure so as to allow for more diverse options. First, the 'Preservation by Interior Alteration' needs to be added to the category, where the exterior is preserved as it is and the interior is preserved through alteration. Also needs to be added the preservation method where the interior space is preserved as it is and the exterior space is altered, in case the finishing materials of the exterior has deteriorated. Third, if the records on registered cultural properties of modern architecture are to provide the functions of legal evidences regarding management of architectural cultural properties, sources of knowledge required for policy making and implementation and past management record for the future, each phase needs to be closely connected in an organic manner, and we need to establish a management system and plan that go beyond the relevant organizations. Fourth, in order to preserve South Korea's registered cultural properties of modern architecture in its original state, it is imperative to prepare separate criteria for registration of technicians with expertise on modern architecture, and train experts and technicians on modern architecture, which is distinguished from the traditional architecture.

RESIN 취급 주물공장 근로자들의 호흡기 건강에 관한 연구 (Respiratory Health of Foundry Workers Exposed to Binding Resin)

  • 최정근;이창옥;백도명;최병순;신용철;정호근
    • Journal of Preventive Medicine and Public Health
    • /
    • 제27권2호
    • /
    • pp.274-285
    • /
    • 1994
  • The effects of resin on the respiratory health have been investigated in 309 workers from four iron and steel foundries and the results compared with those from 122 workers who were not significantly exposed to resin gas and silica dust at the same industries. Phenol-formaldehyde resin was used in the core making and molding processes and workers were exposed to their decomposition products as well as to silica dust containing particulates. The subjects were grouped according to formaldehyde, dust and other gas exposures, and smoking habits were considered also in thi analysis. Standardized respiratory symptom questionnaire was administered by trained interviewers. Chest radiograph, pulmonary funtion tests, and methacholine challenge tests were done. Environmental measurements at the breathing zone were carried out to determine levels of formaldehyde, respiable dust and total dust. Foundry workers had a higher prevalence of symptoms of chronic bronchitis with chronic phlegm and chronic cough when exposed to dust. Exposure to gas was significantly associated with lowered $FEV_1$ and obstructive pulmonary function changes. Exposure to formaldehyde and phenol gas was associated with wheezing symptom among workers, but $FEV_1$ changes after methacholine challenge were not significantly different among different exposure groups. When asthma was defined as the presence of bronchial hyperreactivity with more than 20% decrease in $FEV_1$ after methacholine challenge, 17 workers out of 222 tested had asthma. Fewer asthmatic welters were found among groups exposed to formaldehyde, gas and dust, which indicates a healthy worker effects ill a cross-sectional study. The concentration of formaldehyde gas ranged from 0.24 to 0.43 ppm among studied foundries. The authors conclude that formaldehyde and phenol gas from combusted resin is probably the cause of asthmatic symptoms and also a selection force of those with higher bronchial reactivity away from exposures.

  • PDF

전남지역 제조업의 존립기반과 입지특성 (The Remained Basis and the Locational Characteristics of Manufacturing in Chonnam Region)

  • 김재철
    • 한국지역지리학회지
    • /
    • 제2권2호
    • /
    • pp.19-36
    • /
    • 1996
  • 본 연구는 주변 농촌지역인 전남지역에서 제조업의 존립기반과 입지적 특성을 고찰하였다. 먼저 제조업 입지에 관한 이론적 논외를 검토하여 주변지역에서의 입지특성을 파악하고, 전남지역의 공간적 선행성을 분석한 후 중소기업과 독점적 대기업으로 구분하여 각각 입지적 존립 특성을 확인하였다. 전남지역은 1차산업의 비중이 놀은 농수산업지역이다. 식민지 시기에는 농업에 대한 수탈이 심하여 지역자본이 축적되지 못한 곳이며, 공업화 시대에는 수도권 및 미 일 중심의 지리적 축에서 벗어나 개발이 정체되었던 곳이다. 따라서 영세한 토착성 기업이 제조업의 주류를 이루고 있으며, 자본집약적인 소수 대기업이 독점적 산업공간을 형성하고 있다. 영세한 토착기업은 농수산물과 지역시장에 기반하여 존립하고 있다. 농수산물 식품가공업과 건축자재의 비금속업이 대부분을 점하고 있지만 점차 단순한 조립 및 화학업종이 증가하여 업종구조가 다양하게 발전하고 있다. 이러한 현상은 광주시 주변지역으로부터 내륙농촌지역과 해안지역으로 점차 확대되고 있다. 철강, 화학 등 소재생산 중심의 독점적 대기업의 입지는 지역제조업의 발전을 추동하지 못하고, 지역산업과는 폐쇄적으로 독점적 산업공간을 이루고 있으며, 에너지, 용수, 용지의 다수요 제조업으로서 자연환경에 영향을 미치고 있다. 따라서 향후 전남지역은 포드주의적 대량생산 분공장이 제조업 성장을 주도하면서 주변지역의 특성이 재생산 발전될 것으로 전망된다.

  • PDF

국내 항만의 선박 대기율 실증 분석 연구 (An Analysis of Ship's Waiting Ratio in the Korean Seaports)

  • 김은수;김근섭
    • 한국항해항만학회지
    • /
    • 제40권1호
    • /
    • pp.35-41
    • /
    • 2016
  • 항만 혼잡은 항만의 서비스 경쟁력 및 선화주의 항만 선택 요인으로 중요하게 인식된다. 우리나라 항만의 현행 체선지표인 체선율은 항만별 선박척수 비율로 단순 산정되어 항만의 고객인 선화주의 항만 선택 결정 및 항만관리자의 항만 개발 및 관리 운영 정책 수립 의사결정에 제한적으로 활용된다. 본 연구는 항만운영정보시스템과 해상교통관제시스템 원시자료를 활용하여 우리나라 항만의 선박 입출항 서비스 수준을 측정하고자 약 10년간의 부두별, 선종별 대기율을 산정하였다. 컨테이너선박의 대기율은 4% 미만, 비컨테이너선박의 대기율은 15% 미만으로 UNCTAD, OECD에서 제시한 적정 수준을 만족했다. 대기율 분석 결과, 포항항이 57%로 가장 높았고, 세부 부두별로는 포항 신항의 1부두, 8부두, 4부두, 5부두, 선종별로는 철강재운반선, 일반화물선, 산물선(벌크선) 등의 순으로 높았다. 선박의 접안시간에 대한 묘박지 대기시간의 비율로 측정되는 대기율과 함께 선석점유율, 선박 대기 척수 및 시간 등은 항만 고객의 관점에서 항만별 부두별 서비스 수준을 평가할 수 있는 유용한 지표이고, 나아가 항만관리자의 항만 투자의사결정이나 관리 운영 정책 수립에 중요한 지표로 활용될 수 있다.