• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.189-195
• /
• 2003

The steel wheels are widely used in the passenger cars because of their low cost of production although the aluminum wheels have many advantages in their performance and appearance. It is known that the steering wheel vibration with steel wheels is generated more often than one with aluminum wheels. Both the constant velocity driving test and the m up test are carried out in this study to analyze the causes and path of the steering wheel vibration generated from the steel wheels. And this study shows that the steering wheel vibration is affected by the fastening torque of the wheel mounting bolts between the steel wheel and the suspension disk.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2866-2874
• /
• 1996

In the grinding of difficult-to-materials, the major problmes of conventional grinding are grinding burn, wheel wear, grinding surface crack, loading and glazing, When a conventioanl grinding wheel is used, wheel wear and grinding surface crack easily occur in low heat conductive material and annealed steel. Intermittent grinding is suitable for diffcult-to-matrical such as stainless steel, titanium alloy, aluminum alloy and copper alloy. The purpose of this paper is to develop a new type intermittent wheel of the grinding system for improving the problem of stainless steel grinding, to observe the effect of intermittent grinding on surface quality and grinding characteristics of stainless steel grinding using intermittent grinding wheel. The characteristics of intermittent grinding system improve surface quality, low grinding temperature and low loading.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1326-1330
• /
• 2008

The failure mode of steel road wheels in a vehicle is cracks from ventilation hole through to contact plane on steel wheel's disc plate. But a number of cracks of Cornering Fatigue Limit Test is on contact plane near to wheel nut mounting area, even though it's satisfied with specified cycles. So this paper searches out causes to improve durability and reliability of C.F.T by uni-axial bending moment test. The verified cause is a "fretting" on contact area of steel wheel. In result, this paper suggests a solution to prevent a fretting by inserting a damping shim, 0.7mm between steel wheel contact areas. Therefore this paper makes it possible to move crack position of C.F.T in steel wheel from contact plane to vehicle's failure mode.

• 동력기계공학회지
• /
• 제21권2호
• /
• pp.41-47
• /
• 2017

Boron steel (51B20) was cold forged using by new designed dies to apply for automotive aluminum wheel nut. The formability and mechanical properties of boron steel were compared with carbon steel(S45C) which has been used up to date for the wheel nut material. The formability was investigated on the dies designed with various types of punch nose using by FEM. The metal flow and compressive stress on the dies during cold forging were investigated and compared each other. The forging process with a new designed die showed the improved metal flow with a reduced forging load which resulted in the significant increase of the die life. It was recommended that the carbon steel for automotive wheel nut material could be substituted by the boron steel.

• 한국도로학회논문집
• /
• 제7권2호
• /
• pp.97-107
• /
• 2005

반복주행시험에서 얻은 침하깊이와 동적안정도는 아스팔트 혼합물의 소성변형 저항성 평가를 위하여 널리 사용되고 있다. 하지만 바퀴의 재질에 따라 다르게 얻어지는 실정이다. 따라서 본 연구는 반복주행시험시 핵심요소라 할 수 있는 바퀴의 재질에 대하여 연구하였다. 이를 위하여 2종류(7.5mm, 15mm)의 고무바퀴와 고무를 씌우지 않은 강재(Steel)바퀴 한 종류를 사용하였으며, 반복주행시험을 통하여 바퀴재질에 따른 혼합물의 소성변형 저항성을 평가하였다. 또한 반복주행시험에서 얻은 침하깊이와 동적안정도를 Kim test의 변형강도와의 상관성 분석을 통하여 반복주행 시험용 최적 바퀴를 선정하는데 이용하였다. 고무두께가 15mm, 7.5mm, 0mm에 대한 상관성 분석결과 각각 0.7, 0.8. 0.9 이상이 나와 고무를 사용하지 않은 강재바퀴가 변형강도와의 상관성이 가장 높은 값을 보여주어 향후 반복주행시험시 강재바퀴의 사용이 소성변형을 예측하는데 가장 유리 할 것으로 판단된다.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.29-37
• /
• 1998

In recent years, grinding techniques for precision machining of stainless steel used in shaft, screw parts and clear value have been improved by using the superabrasive wheel and precision grinding machine. The completion of optimum dressing of superabrasive wheel makes possible the effective precision grinding of stainless steel. However, the present dressing system cannot have control of optimum dressing of the superabrasive wheel. In this study, a new system and the grinding mechanism of optimum in-process dressing of superabrasive wheel. Therefore, the optimum in-process electrolytic dressing is a good method to obtain the efficiency and mirror-like grinding of stainless steel (STS304)

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.271-276
• /
• 1998

To apply the wear resistant steel plate for heavy duty vehicle, the wear characterisms of various kinds of commercial steel plates were invesigated by dry sand/rubber wheel tester which was tested under scratch abrasion mode. The wear tested pnaterials were boron steels which were manufactured by thereto machanical control process (TMCP) in order to achieve higher hardness. As the result of the test, wear resistance of steel plate increases with the hardness and carbon content. The wear loss of wear resistance steel plate (Hv440) is a half times than tinat of SWS490A (Hv160) steel plate in dry sand-rubber wheel test and the result in field test is similar to this dry sand/rubber wheel test result. Therefore, dry sand/rubber wheel tester can be used to predict the scratch abrasion life of the parts for heavy duty vehicle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.570-573
• /
• 2003

Wheels for passenger car support the car weight with tires. and they transmit rolling and braking power into the ground. Whittliing away at wheel weight is more effective to boost fuel economy that lighting vehicle body structure. A shape of hole in disk is optimized for minimizing the weight of steel wheel. Pro/ENGINEER program is used for formulating the design model. and ANSYS package is selected for analyzing the design model. It has difficulties 10 interface these commercial software directly. For combining both programs. response surface methodology is applied to construct approximation functions for maximum stresses and maximum displacements are obtained by full factorial design of five levels. This steel wheel is modeled in 14-inch diameter of rim. and wide parameter of hole in disk is only selected as design variable for reducing the weight of steel wheel. PLBA(Pshenichny·Lim-Belegundu_arora) algorithm. which uses the second-order information in the direction finding problem and uses the active set strategy. is used for solving optimization problems.

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.16-25
• /
• 1999

In recent years, grinding techniques for precision machining of brittle materials used in die, model and optical parts have been improved by using superfine abrasive wheel and precision grinding machine. The completion of optimum dressing of superfine abrasive wheel makes possible the effective precision grinding of die steel(STD-11). In this study, a new system and the grinding mechanism of optimum in-process electrolytic dressing were proposed. This method can carry out optimum in-process electrolytic dressing of superfine abrasive wheel. Therefore, the optimum in-process electrolytic dressing is a good method to obtain the efficiency and mirror-like grinding of STD-11.

• 한국전산구조공학회논문집
• /
• 제16권1호
• /
• pp.105-111
• /
• 2003

승용차의 휠은 타이어와 차체 무게를 지지하며, 회전력과 정지력을 노면으로 전달한다. 휠의 경량화는 차량의 연료효율에 효과적이므로, 스틸휠이 무게를 최소화하도록 디스크 홀이 형상을 최적화 하였다. 설계모델은 Pro/ENGINEER를 사용하여 설정하고, 설계모델의 해석은 ANSYS를 이용하였다. 범용 소프트웨어간의 직접적인 자료의 전달이 어려우므로 두 프로그램을 병합 사용하기 위해, 반응표면법을 이용한 근사함수를 구하였다. 5수준의 요인배치법의 실험값을 사용하여 최대응력과 최대 변위를 추출하였다. 초기 모델은 14인치 승용차용 스틸휠을 사용하였고, 디스크 홀의 폭을 설계변수로 선택하였다. 순차이차계획법과 활성화제약조건을 사용하는 PLBA(Pahenichny-Lim-Belegundu-Arora) 알고르즘을 이용하여 최적해를 구하였다.